Buying a low-pressure inflatable watercraft (LBBB) is just the first step towards creating the perfect fishing tool. Factory equipment is often geared towards basic needs, leaving the fisherman with the option of customizing to suit his needs. A competent approach to modernization allows him to turn the standard model into a comfortable boat that can withstand many hours of waterfall.
The modern market offers many solutions, from simple overlays to complex navigation systems. However, not all improvements are equally useful, and some can even disrupt the balance of the vessel. In this article, we will discuss the most effective ways to improve the performance, safety and ergonomics of your vessel.
Organization of space and protection of the bottom
The first thing that the owner of a new boat with NDND is the need to protect the sensitive bottom from punctures. Although the cylinders and the bottom are made of durable material, contact with sharp stones, snags or seashells at rolls can be fatal. protector-belt Or a full PVC fabric mat will significantly prolong the life of your boat.
It's important not to overload the structure with extra weight. The best solution is to choose materials that do not absorb water and are easy to wash. Many anglers use special anti-slip mats that also serve as a heat insulator.
- 🛡️ Train patch - protects PVC from friction against the engine and splasher.
- 🧱 Protective thonger - glued to the joints of cylinders and bottom to protect against istyrs.
- 🧼 Removable mat - allows you to quickly clean the bottom of silt and sand after fishing.
⚠️ Note: When adhesive to any protection elements, use only a specialized two-component PVC glue. Use of household adhesives can lead to detachment of the material and damage to the balloon when heated in the sun.
Special attention should be paid to the area of attachment of cans (seats). If the set comes with simple plywood boards, they should be replaced with models with soft linings or immediately install full-fledged plywood boards. backchairNot only will this increase comfort, it will also reduce the load on the lower back during long fishing.
Installation of fences and safety
Safety on the water comes first, especially if you plan to fish in windy weather or with an active load, such as with children or a dog. Standard safety handles are often inconvenient or not enough. fence The perimeter of the cockpit solves this problem.
The design is a cable strung on racks attached to cylinders, which allows passengers to hold handrails when driving, and also serves as an excellent mounting point for additional equipment, and the installation of such systems requires care so as not to damage the valves or seams of cylinders.
☑️ Security check before exit
When installing the struts, it is important to observe symmetry. Overloading one side can lead to the roll of the vessel, which is especially critical for narrow models. Use regular hinge belts or special mounting areas, if provided by the design.
| Type of fencing | Material of the cable | Difficulty of installation | Reliability |
|---|---|---|---|
| Basic (pens) | PVC/Tissue | Factory | Medium |
| The cable (DIY) | Stainless steel | High. | High. |
| Complete set | Synthetics/Steel | Medium | High. |
| Soft side | PVC pipe | Low. | Low. |
There is no need to save on fittings. Cheap cable can rust after the first season, and poor-quality carbines - let down at a critical moment. The guardrail It is an item that should last for years without maintenance.
Installation of navigation equipment and sonar
Modern fishing is unthinkable without a sonar and a GPS navigator. Owners of boats with NDNDM often face the problem of attaching sensors, because the hard transom is occupied by the engine, and the soft bottom does not allow the use of standard suction cups. downscanner on a removable platform or the use of special brackets.
To attach the head unit (screen), you can use universal holders with suction cups on the cylinder or rigid brackets attached to the can, the main thing is to provide visibility and protect the electronics from splashing and falling.
- 📡 The bracket on the jar - rigid fixation of the sounder screen above the fisherman's head.
- 🔋 Germobox for AKB Protection of the battery from water and ease of transportation.
- 🔌 Cord-wiring - protection of wires from ultraviolet light and mechanical damage.
How do you wire safely?
Lay the wires along the seatbelt, fixing them with plastic clamps. Avoid tension and contact with sharp corners. Use regular valves or neatly made holes with sealed bushings to pass through the side.
It's important to think about the power system, and the sonar and motor battery should be placed in a separate sealed box that can be mounted on the floor, which will lower the center of gravity and keep the battery from getting water.
Improved ergonomics: Seats and Runduks
Standard hard cans quickly cause back discomfort. backchair Or the installation of soft linings changes the way you feel about fishing, but the installation of heavy chairs requires weight redistribution to keep the boat from differentiating.
The best solution for NDND boats is inflatable seats or rods, which are both a storage area and a backrest, and they're not afraid of water and they can be washed easily.
⚠️ Attention: When installing additional heavy elements (anchor boxes, kunduks), place them strictly in the center of the diametrical axis or symmetrically. Shifting the center of gravity sideways can lead to a dangerous roll when entering the plane.
It is also possible to install foot-stitchThis is a simple redesign that allows you to change the position of your legs and reduces fatigue with a long wait for a cool thing, and you can use removable platforms that are attached to banks to do this.
Anchor system and its finalization
Keeping the boat on point is a key point for the angler: staff anchors are often too light to flow or wind. Upgrades to the anchor system start with choosing the right type of anchor (e.g., the right type of anchor). denforth or Grapple.) and convenient storage arrangements.
For boats with NDND, it is critical to organize the anchor tile correctly, so it should not get confused in the legs or hit the engine propeller. anchor-roller on the bow or on the sides simplifies the sampling of the anchor and protects the board from grinding.
The ideal design is two anchors, the main anchor and the vertebrae, which allows you to stand on the stretch and lock the boat even in strong lateral winds, the fasteners must be made of stainless steel or high-quality plastic.
Properly organized anchorage saves time and effort, allowing you to focus on fishing, rather than fighting the current.
Additional accessories and final touches
The final step of tuning is to install the little things that make fishing fun, which include rod holders, bait tables, lights and organizers, and the market offers many versatile solutions that are attached to the belts or cylinders.
Don't forget the lighting. LED lighter It is mandatory for night fishing and for navigation in the dark, and the light should be visible from all sides, but not blind the angler.
- 🎣 Spinning holders - allow you to free your hands when catching or changing the bait.
- 🔦 Navigation lights - a mandatory element for going out on the water at dusk.
- 🗑️ Garbage container A small sealed tank to keep the cockpit clean.
In conclusion, it is worth noting that tuning is a creative and individual process. The optimal configuration of the boat is achieved only by trial and error in real operating conditions. Don’t be afraid to experiment, but always keep balance and safety in mind.
Can I make the scoring on my own?
Yes, you can if you use the right two-part polyurethane adhesive and follow the technology (degreasing, surface activation, drying), but complex structural elements are better ordered from professionals or buy ready-made kits.
How much will the weight of the boat increase after tuning?
Weight can increase by 5-15 kg depending on the number of modifications. For boats with NDND, this is usually not critical, since they initially have a payload reserve, but it is worth considering this when transporting.
Which material is better for overlays: PVC or EVA?
PVC is longer-lasting and cheaper, but cooler to the touch. EVA (foamed ethylene vinyl acetate) is warmer, more pleasantly tactile and has better anti-slip properties, but costs more.