The modern market of small craft offers a wide range of inflatable structures, however, it is the PVC boats Azimuth Buyers are attracted by a combination of affordable cost, high reliability of materials and thoughtful ergonomics, which makes these vessels ideal for fishing and outdoor activities on the water. The official approach to production ensures that each model meets the declared specifications and safety standards.

When choosing a boat, it is important to understand that dealership And the manufacturer provides a full warranty that you can't get from hand-held or questionable dealers, and in this article, we'll go through the product line, the technical features and the nuances of operation so you can make an informed decision. All Azimuth boats are certified according to GOST and undergo a mandatory hydraulic test at the plant before being sent to the buyer.

A variety of modifications can confuse even an experienced boater, so it is worth deciding in advance on the type of bottom, load capacity and power of the planned engine. We will help you navigate the official specifications and avoid common mistakes when buying.

Advantages of buying from an official manufacturer

Turning to an official source of sales is not just a tribute to fashion, but a necessity dictated by the desire to get a quality product. squirrel directly or with authorized partners, you exclude the risk of acquiring counterfeit, which may be made of poor-quality technical PVC, not intended for contact with water and ultraviolet light.

The factory warranty covers all seams and joints, which is a critical parameter for water safety, and in the event of a production defect, official service centers will promptly conduct diagnostics and repairs, which is not the case with artisanal workshops.

  • 🚀 Full equipment according to the product passport, including remake, bag and oars.
  • 🛡️ Legal protection of consumer rights and the possibility of returning goods if defects are detected.
  • 📄 Availability of all necessary documents for registration in GIMS (if necessary) and quality certificates.
📊 Where do you plan to buy a boat?
The official dealer.
On Avito/b/u
At a major chain store.
I'll order from China.

In addition, the official manufacturer is constantly updating the model range, introducing new technologies for welding seams and improving the ergonomics of cylinders. Buying an old model from a privateer, you risk getting a design with a process of degradation of glue or fabric that has already begun, even if it is not visible visually.

The brand range covers the needs of both amateur solo fishermen and professional lifeguards, with the main division being the bottom type: inflatable (NDND) or hard (plywood/aluminum). Azimuth 320 and Azimuth 360 It is considered a bestseller due to the optimal balance of weight and load capacity.

For those who prefer the minimum weight assembled, the low-pressure inflatable floor models are relevant, which allow you to put the boat together with the engine and not disassemble it during transportation, just blowing out the cylinders, but for driving under a powerful engine, a hard bottom is preferable, which provides better hydrodynamics.

Below is a comparative table of the main specifications of popular models so that you can clearly assess the differences:

Model Length, cm Width, cm Load capacity, kg Weight, kg
Azimuth 280 280 130 350 18
Azimuth 320 NDLD 320 140 450 32
Azimuth 360 Pro Pro 360 150 600 45
Azimuth 420 420 160 800 58
💡

The choice between NDND and hard bottom depends on the assembly frequency: for frequent trips without a car, it is better than NDND, for a powerful engine - plywood or aluminum.

It is worth noting that modifications with the prefix "Profi" or "Taimen" are often equipped with reinforced transom bushings and additional perimeter leer, which allows you to install more powerful engines and feel comfortable on the wave.

Technical specifications and materials

The basis of durability of any PVC-boat The official Azimuth products are made of five-layer fabric that is resistant to abrasion, gasoline, oils and ultraviolet radiation. The material density varies from 750 to 1100 g/m2 depending on the model.

The seams are connected by hot welding, which creates a monolithic bond that is stronger than the material itself, which eliminates the possibility of the side stratification during active operation, the Tran is made of moisture-resistant plywood of increased strength or marine aluminum, which guarantees the rigidity of the motor attachment.

⚠️ Warning: Do not use car compressors to pump the boat without pressure control. Excess pressure in the heat can cause joints to rupture or cylinder deformation, which is not a warranty case.

The fittings used in the design also undergo rigorous selection. Bayonet or Bravo They provide airtightness and ease of air etching, and carry handles are glued with additional reinforcement to support the weight of a full crewed boat.

Effects of PVC temperature

When the temperature drops, the material gets stiffer, and the pressure inside the cylinders drops. That's normal, but it requires pumping on the water. In the heat, the pressure rises, so leave the boat in the sun, blow some air.

An important element is the quill that runs along the bottom, which gives the body longitudinal rigidity and works like a ski, improving the yield on planing and stability when driving.

Installation and additional equipment

Azimuth boats are typically equipped with everything you need to start operating, but for comfortable fishing or cruising, you often need to be equipped with equipment.seat(s), pump, bag-packing and remix.

Special attention should be paid to the choice of transom. If you plan to use an electric motor, make sure that the height of the transom matches the daywidth of your engine. For high-power gasoline engines, it is recommended to order a reinforced transatron with aluminum linings.

  • ⚓ Anchor rum and leer for safe anchoring and towing.
  • 🎣 Holders for rods and mounts for sonar (often go as an option).
  • 💡 Fixing under the hinged transom to install an additional electric motor.

☑️ Checking of completeness upon receipt

Done: 0 / 4

Many owners immediately order protective belts for cylinders (swaft beam), which significantly extend the life of the boat when pulling on shore, and soft linings on cans are also popular, making many hours of sitting more comfortable.

Remember that the official extra equipment is designed specifically for the geometry of a particular model, so the use of universal accessories may be less effective.

Care, storage and maintenance

And PVC boat Azimuth You have been serving for years, and you have to follow simple rules of operation, and after every trip, especially on salt water or in dirty water, the boat needs to be rinsed with fresh water, which will prevent the corrosion of the accessories and the destruction of the adhesive seams by aggressive environments.

Store the boat in a dry, cool place, away from heaters and direct sunlight. The optimal storage temperature is from -10 to +30 degrees. Before packaging for long-term storage, the boat should be thoroughly washed, dried and slightly sprinkled with talc so that the layers of PVC do not stick together.

⚠️ Warning: It is strictly forbidden to wash the boat with aggressive solvents, acetone or gasoline. Use only soap solution or special PVC cleaners.

Check the pressure in the cylinders regularly. Even a microscopic puncture that is invisible to the eye can become a serious problem over time. Use soapy water to look for small leaks, which will start to bubble at the site of the injury.

💡

Lubricate the valves with silicone lubrication once a season - this will prevent them from jamming and ensure tightness for many years.

If you notice a joint discrepancy or a mechanical cut, don't delay repairs. Use the in-box glue and patches, following the instructions. Good-quality minor repairs prolong the life of the product better than waiting until it heals.

Under current legislation, vessels weighing more than 200 kg or with an engine power of more than 8 hp (5.88 kW) are subject to registration. Many Azimuth models fall into the category of unregistered if their mass in running order (with engine and equipment) does not exceed the limit.

However, if you are planning to install a powerful engine or the boat itself is heavy (for example, the 380+ model with an aluminum bottom), the procedure is mandatory.

For registration you will need:

  • 📄 boat data sheet and contract of sale.
  • 💰 The receipt for payment of the state duty.
  • 🆔 Personal document of the owner (passport, TIN).

It is important to keep all checks and documents from the moment of purchase, and the absence of a factory passport can make it impossible to register, even if the boat is officially purchased, but the documents are lost by the owner.

💡

Purchase from an official dealer guarantees the availability of a full package of documents necessary for without a problem registration in the GIMS.

Owners should remember that even for unregistered boats, the presence of life jackets and alarms is a mandatory requirement for safety on the water, for non-compliance with which there are penalties.

Frequently Asked Questions (FAQ)

What is the maximum weight of the engine can be put on the boat Azimuth?

Maximum power and weight of the engine depend on the specific model and are specified in the product passport. Usually for models with a length of 320 cm, engines up to 9.9 hp are recommended, and for 360 cm - up to 15 hp Exceeding the recommended power can lead to transomper failure and loss of warranty.

Can I use the boat in winter or in the cold?

Operation is possible, but it requires caution: at temperatures below -5°C, PVC becomes less elastic, avoiding impacts on the ice and sudden movements, inflating the boat is better in a warm room, and in the cold only adjust the pressure, because in the cold it will fall.

How long does the boat dry after washing before packing?

At home, at room temperature, it takes 12 to 24 hours for a boat to dry completely, especially in hard-to-reach places (corners, seams), packaging a damp boat will cause mold and unpleasant odor, as well as the destruction of the adhesive layer.

Do Azimuth boats have a removable bottom?

In hard bottom models, the bottom sections are removable. In low pressure inflatable floors, the bottom is an integral part of the structure and is not removed, but the boat folds together for transportation.