Purchase fishing-rod For an inflatable boat, it's not just an accessory, it's an investment in the comfort and efficiency of all fishing. Unlike the classic donkey, which requires constant contact with the hand, a fixed board allows you to free your limbs and focus on sonar or boat control. Fishermen often look for ready-made solutions in stores, but the market is oversaturated with models of different quality, and it can be difficult to choose a really reliable option.
The main difficulty lies in the specificity of the material PVCThe hard side does not forgive attachment errors, and the soft balloon requires a delicate approach so as not to damage the fabric when a large fish jerks, which is why the question is where and what kind of fish is. fishing-rod It's a good nod and a reliable holder that makes fishing fun, eliminating the risk of losing a trophy due to a break in gear.
In this article, we will examine all the nuances of choice, consider popular designs and suggest which technical specifications should be paid attention to first, you will understand whether it is worth overpaying for factory models or it is easier to assemble an effective gear yourself from available components.
Design features of on-board fishing rods for inflatable vessels
Modern fishing-rod It's a complex mechanism, and it's made up of several critical elements, and the backbone is a whiplash, and it has to be flexible, but it has to be stiff enough to cut fish at the depths. PVC Short models are often used, ranging in length from 0.6 to 1.2 meters, due to the limited space of the cockpit.
The second important element is the nod, which is the nod that signals the bite, and in store models, plastic or metal spring nods are often installed, but experienced fishermen prefer to change them to more sensitive ones made of lausan or clock spring. nod It should be adjusted to the weight of a particular mormy or loader, otherwise you simply will not see a careful touch of bream or pike.
The third component is the coil. Here, there's a split between the old-school inertial models and the smaller ones, which are non-inertial, which is critical to the brakes and the ability to change the spools quickly, and cheap plastic coils in the cold or in the hot sun can crack, leaving you without a catch.
- 🎣 Whiplash: It should be frost-resistant and not lose elasticity at negative temperatures.
- 🎣 Kiwok: adjustable length and rigidity allow you to adapt the gear to different flow conditions.
- 🎣 Coil: The presence of a friction or reverse rotation stopper is necessary for catching large fish.
⚠️ Warning: When buying a finished fishing rod, be sure to check the quality of the assembly of the knots. Any backlashes in the mounting of the whiplash to the body are unacceptable, since with a strong pull, the gear can simply fall apart.
Types of fasteners: from suction cups to rigid installation
Choosing a way to fix the fishing rod PVC It's a very direct effect on safety and convenience, and the easiest way to do that is to use suction cups, which are quickly mounted and dismantled without needing to drill the cylinders, but there's a big downside to suction cups, which is that when you get excited or you jerk the trophy, they can unstuck and the gear will float away.
A more reliable option is a mount on a transom board or a rigid cockpit element, which uses special holders with clamps, which ensure a stable position of the fishing rod, but require a hard surface, and owners of boats without a hard transmolant often have to go to tricks, setting additional bars.
The most reliable, but also the most time-consuming method is to stick glasses (wells) directly into a balloon, which requires the use of a special glue for the use of a glass. PVC The glued glass holds the rod "dead" by allowing the fish to be caught using the boat itself as a lever, but any damage to the balloon at the place of the sticker will require serious repairs.
When you choose a mount, consider where the gear will stand. trolling You can't save on hardware, cheap plastic in the cold becomes fragile, and one blow to the water can cost you gear.
Manufacturing materials: which is more durable?
Material quality is the main criterion for the life of a fishing rod, and cheap models are often made from conventional polypropylene or low-grade plastic, and in the sun, this material quickly burns out and becomes brittle. Frost-resistant plastic (e.g., polyamide or specialty composites) are more expensive, but last for years even in extreme temperatures.
The lashes are made of fiberglass or carbon fiber.carbon) Lighter and more sensitive, but he is afraid of impacts and pinches. Fiberglass is more lively, forgives errors in transportation, but has more weight. For the board, where the length of the whip is small, the weight is not as critical, so fiberglass is often a more rational choice.
The fittings (rings, tulips) must be made of ceramics or high-quality metal with anti-corrosion coating. The rings of cheap wire quickly rust from the salt water and rub the fishing line. When buying, carefully examine the inner surface of the rings: it should be perfectly smooth.
| Materials | Strength | Weight. | Price. | Recommendation |
|---|---|---|---|---|
| Fiberglass | High. | Medium. | Low. | Universal choice |
| Carbon-plastics | Medium | Low. | High. | For sport fishing |
| Cheap plastic | Low. | Low. | Minimum | Just for quiet water. |
| Titan (elements) | Very high. | Medium. | High. | For extreme conditions |
⚠️ Warning: Never use metal rods without salt water corrosion-resistant coating. Rust breaks down metal in one season, and oxides spoil the fishing line.
Ready-made solutions against homemade products: which is more profitable?
The market offers a lot of ready-made kits, collectively called "on-board fishing rods," which have the advantage of aesthetic appearance and thoughtful ergonomics. You don't have to invent anything: buy, put a coil, wind a fishing line and swim, but the price of such products is often 3-4 times the cost of components.
Building a fishing rod yourself allows you to create a gear that is perfectly sharpened for your tasks, and you choose the length of the whip, the type of coil and the design of the nod. Homemade It can be made from old spinning pins, brush handles, or even simple plastic pipes reinforced inside, and it gives you complete freedom of creativity.
Financially self-assembly wins by a huge margin, and for the cost of one branded factory fishing rod, you can build three or four great sets for friends, and also, the repairability of the homemade is higher: the whip broke, a new one was inserted, the coil broke, and any one that fits.
- 💰 Savings: The cost of homemade is 20-30% of the price of the store analogue.
- 💰 Flexibility: The possibility of instant modernization for a specific fishing.
- 💰 Unique: You are creating a tool that no one else has.
The secret of the durability of homemade fishing rods
Use epoxy glue with graphite dust to strengthen the joints, which adds additional strength and reduces friction at the joints.
Instructions: how to properly install the fishing rod on board
Installation of the gear requires preparation. First, determine the location of the attachment. It should be easy to access with your hand, but not interfere with the operation of oars or motor. If you use glued glasses, make sure that the glue is fully polymerized (usually 24-48 hours).
The process of mounting is as follows: first, fasten the holder or insert the fishing rod into the glass, then fix the coil if it is removable, check the line through the rings - there should be no hooks, only after that you can lower the gear into the water.
☑️ Pre-installing check
It's important to adjust the angle of the whip, and for the plumb fishing, it has to look down almost vertically, and for the current fishing, it has to look at an angle, offsetting the pressure of the water flow. And remember, insurance, tie the rod to the boat with a thin flap, so that if it falls, it doesn't drown.
⚠️ Attention: When installing the fishing rod, make sure that the sharp parts of the holder or coil do not touch the cylinder of the boat. Constant friction against the PVC fabric will cause scuffling and eventual puncture.
Where to buy: a review of sources and tips for choosing
If you decide to buy a finished product, you have several ways: large fishing chain stores offer a wide range, but the prices there are often “bit”, but there you can feel the goods and consult with the seller (although their competence is not always high).
Online marketplaces and marketplaces offer a huge selection of models from Chinese manufacturers. You can find cheap options here, but the risk of getting a cat in a bag is high. Read reviews carefully, look at seller ratings and photos of real buyers. Chinese fishing rods They often sin with poor quality plastic and weak nods.
Specialized forums and social media groups are a treasure trove for finding quality homemade products from single craftsmen, and there you can buy components: whips, nods, tulips, buying from private individuals is often more profitable, and the quality of products made for yourself is higher than the factory.
When buying a fishing rod on the marketplace, be sure to order the product with the option of “checking the completeness”, this will allow you to abandon the illiquid before payment, if the complete set does not match the description.
Pay attention to the warranty. Factory products must have a warranty card. For homemade products, the warranty is the reputation of the craftsman, so look for trusted manufacturers with recommendations.
Frequently Asked Questions (FAQ)
Can I use a regular winter fishing rod for the board?
Technically, but not recommended: Winter fishing rods are too short and easy for a boat, easy to lose overboard, and catching fish with a short whip from a high side is inconvenient and fraught with a cliff.
What length of whip is optimal for a PVC boat?
The optimal length is from 60 to 90 cm Longer whips will interfere in a tight cockpit, and too short (less than 50 cm) will not give the desired cushioning when jerking fish.
Do I need to remove the fishing rods while the engine is running?
Yes, it must. The engine produces vibrations that can knock the nod off the tuning, and the line can wind on the screw, causing the fishing rod to break or damage the engine's lower unit.
How to store the rods between seasons?
Store in disassembled form, removing the load from the nod. It is best to remove the gear in a dark, dry place, away from the heating appliances, so that the plastic does not deform.
A well-fitted and fitted fishing rod is the key to a successful fishing trip. Don't skimp on the quality of the materials, because the price of a lost trophy is always higher than the price of a good tackle.