Fishing bream from an inflatable vessel is very different from fishing from shore or from a massive metal Kazanka, and the buoyancy of PVC creates unique conditions: no hard vibration of the hull, but high sailing and sensitivity to wind gusts. fishing-rod For such fishing should be not just a short stick, but a specialized tool that allows you to compensate for the swing and maintain control over the tooling.
Many anglers make the mistake of adapting standard spinning or long fly rods, and with limited space inflatable balloons and constant shifting water horizons, this leads to constant overlap and loss of precious time, and well-assembled gear allows fishing even in the face of extreme excitement, when the bream comes closer to shore due to a drop in atmospheric pressure.
In this article, we will analyze in detail the nuances of choosing a rod, the features of its attachment to the kielson Or a trawler, and tactics that will turn your PVC boat into an effective floating platform for catching trophy bream, you will learn why a whip length of 2 meters can be a fatal mistake and how to properly set up a peck alarm.
Design features of on-board rods for inflatable boats
The main requirement for a rod to catch from a PVC boat is compactness combined with sufficient rigidity. The optimal length of the form varies from 1.2 to 1.8 meters. Longer models, such as the classic 2.1-2.4 meters, will cause discomfort: they cling to cylinders, interfere with the work of the oar or motor, and also more powerful sails in the wind, which reduces sensitivity to cautious bites.
The fabrication material also plays a critical role. Graphite They have excellent sound and light weight, which is important for long-term fishing with one hand, but they require careful handling and are afraid of being hit on the side or sharp objects. composite or fiberglass variants are heavier, but forgive careless handling and have high flexibility, which is useful when catching large fish near the soft side.
⚠️ Attention! Avoid rods with an overly soft structure ("noodles"). On the wave, the tip of such a form will make chaotic movements, simulating a bite, which will lead to rapid fatigue of the angler and empty cuts.
The handle design should provide a reliable grip even with wet hands. Rubber or cork coatings are preferable to smooth plastic. Also pay attention to the bandwidth rings: models with an increased diameter are better suited for the board, so that the line does not get stuck when the boat jerks sharply.
Criteria for the selection of gear for specific conditions
The choice of a particular model depends on the depth of the catch and the strength of the current. For standing water and depths up to 5-6 meters, a lighter option with a test of up to 20-30 grams will be suitable. If you plan to catch on deep eyebrows or on the course where a heavy feeder is required, the test should be increased to 60-80 grams. The rod test This is not just a recommendation, but a limit of strength, exceeding which threatens to break the form.
An important element is a nod or alarm. Unlike winter fishing, it often uses a metal plate side nod or a lausan tulip. Some anglers prefer visual control at the tip of the rod, but in windy weather on PVC boats, this is ineffective. Battery-powered electronic alarms are also eligible for life, especially when fishing in the dark.
Telescopic models are convenient for transportation in a boat bag, but pin joints (plugs) provide better structure and reliability. For the board, models that are folded do not exceed 60-70 cm, which allows you to remove them into a rod when switching to the engine.
Installation and fastening of the fishing rod on a PVC boat
Holding the fishing rod throughout the fishing season is a novice's task. Experienced boaters use a variety of attachment systems that free their hands for bait or navigation. holder, which are attached to the keys of the oars or directly to the transom.
For PVC boats, soft holders with angle adjustment are the ideal solution. A rigid plastic or metal holder can damage the balloon when rolled hard. The fastening must be reliable but quick to dismantle. Often anglers use a dad-mama system, where the base is fixed on the boat, and the fishing rod is inserted into it.
☑️ Checking the fishing rod attachment
There is also a method of attaching to the pendant (inflatable floor) using special platforms, but it is only suitable for calm weather. in choppy conditions, this design will transmit all the vibrations of the water to the tackle, best proven by mounting on board through soft hinges or rigid brackets mounted on a transom board.
Equipment: coils, lines and installation
For the side fishing rod, inertial coils of the "Nelma" type are most often used, or high-quality Chinese analogues with good brakes. Non-inertional coils ("meat grinders") are less convenient due to the sailing of the fishing line when winding down and the risk of overhang during pitching. Inertia coil allows you to instantly release the fishing line when pecking and just as quickly choose a slack.
The diameter of the main line depends on the size of the proposed trophy. For bream weighing up to 1.5 kg, monolesque 0.20-0.22 mm is quite enough. The use of a wicker cord is justified only when fishing at great depths or strong currents, where zero stretchability is important. However, the wicker requires more delicate catching, so as not to break the lip of the fish with a jerk.
| Element of tooling | Recommended parameters | Appointment |
|---|---|---|
| Main line | 0.18 - 0.25 mm | Link, depreciation of jerks |
| A lead. | 0.12 - 0.16 mm (fluorocarbon) | Secrecy, resistance to the teeth of bream |
| Hooks. | № 10–14 (according to international classification) | Engagement of the nozzle (worm, worm) |
| Feeder | Spring or grid 30-60g | Bait-and-anchor delivery |
Installation is usually a sliding feeder or a blank tool with short leashes. The length of leashes for bream varies from 15 to 40 cm. fluorocarbon Leash fishing lines, as it is less noticeable in water and more resistant to abrasion on the shell than regular nylon.
Bream catching tactics off the board
Boat fishing allows you to catch hard-to-reach areas: deep pits, dumps, thickets of water lilies, where it is difficult to throw from the shore. The tactic is to find a "table" - a flat area at the depth where the bream goes to feed. The presence of a sonar makes it much easier to see the fish and the bottom relief in real time.
The most important aspect is anchoring. The boat should stand with its nose against the current or the wind. If the boat turns sideways, the peck may stop, because the shadow from the hull and the noise frighten the cautious bream. Using two anchors (nose and aft) or stretch marks allows the boat to be fixed in a horizontal position.
The secret of a quiet approach
Bream is very sensitive to impacts on the side. Before you pick up the fish, put the suckers on the bottom of the boat so as not to create splash noise. Also avoid sudden movements and trampling on the inflatable floor.
The bait should be heavy and sticky, so that it does not immediately erode on the flow, but also does not lie dead weight. The optimal use of a mixture of breadcrumbs, boiled millet and a live component (wog, chopped worm). The start feed is done in a large portion, followed by feeding small balls or portions from the feeder every 5-10 minutes.
Safety and behaviour at water
Boat Fishing, especially when standing or on the wave, is risky. Abruptly standing up when pecking a large bream can lead to loss of balance. Always keep your free hand overboard or a piece of boat construction. Life jacket It is a must-have even if you are a great swimmer and are 10 metres from the shore.
PVC boats are sensitive to punctures. Hooks, especially tees or large single-pieces, are dangerous to cylinders, it is recommended to have a repair kit and glue on hand, and try to keep the hook stings pointed up or away from the rubber when catching.
Bring a spare set of leashes with hooks already tied. Breaks happen often, and knitting on the wind and pitching is a thankless occupation.
Watch the weather. A sudden change in wind or a strengthening wave can make coming back to shore dangerous. Breaths are often activated before the weather gets worse, but the risk of losing gear or flipping over is not worth one trophy. Always assess your strength and the condition of the boat.
The secret to success is the boat's stable position and silence, and the bream won't fit a noisy object that's chaotic on the waves.
Frequently Asked Questions (FAQ)
Can I use spinning for onboard bream fishing?
Technically, you can shorten it or use only the top, but spinning spinnings have a different test and structure, are less sensitive to careful bream bites and are often too long for comfortable fishing from a PVC boat.
Which one works best when fishing from a boat?
Depending on the season preferences vary. In spring and autumn, the best result is the worm and the corn. In summer, the bream often prefers plant nozzles: steamed peas, barley, mastyrka or canned corn.
Do you need to feed the point if you catch from a boat?
Without bait, the chances of success are minimal, because the fish is so big, the bait picks up the fish under the boat and keeps it there, and it's important not to overfeed the bream using inert fillers (soil, clay).
Why does the bream stop pecking when approaching the boat?
The bream is a very careful fish, and it's frightened by the shadow of the boat, the noise of the impacts on the side, the vibration and even the silhouette of the fisherman, and using the cloaking net on the boat and keeping quiet helps to minimize this effect.