Fishing bream from a boat is radically different from fishing from the shore, primarily because of the possibility of spot catching promising depths and brows, which can not be reached from land. Flight fishing rods In this context, they are the main tool that allows the angler to work effectively in plumb or in ponds, regardless of the strength of the current, and the design of such gear should be as compact as possible so as not to interfere with the control of the boat, but also have a sufficient margin of safety for catching captured fish.
Key Benefits of Use sideboard And it's a quick shift from place to place, and it's a quick change in depth, and unlike bottom gear, anglers are constantly monitoring the process, feeling every touch of the fish to the bait through a thin whip, and well-assembled gear allows you to catch even on a strong current, where a regular float fishing rod would be useless, and feeder fishing would require heavy feeders.
In this article, we will analyze in detail the nuances of choosing materials for self-made or buying ready-made extension cords, the features of mounting equipment under various conditions and tactical methods for searching for bream flocks. The optimal length of the whip for the side is 50-70 cm, which provides a balance between the amplitude of the cut and ease of storage. Understanding the physics of tackle behavior in the water stream will help you significantly increase the number of effective bites.
Design features of the onboard fishing rods
The basis of any onboard gear is an angler, which is structurally different from the usual spinning or fly rods. Most fishermen use short fishing rods ranging from 40 to 80 centimeters long, which are attached directly to the sides of the boat, and they are ideal for the tops of old telescopic fishing rods, fiberglass whips or even durable bamboo rods that have undergone special treatment.
The most important element of the design is nodIt's a slack signaling and shock absorber for fish jerks, and bream nods have to be tough enough to keep the tooling running, but they're sensitive, and they often use spring steel metal plates or lausan elements that vary in length from 15 to 25 centimeters depending on the flow rate.
The rod attachment to the boat is another critical point that needs attention: the angler must be fixed rigidly, but quickly removed if necessary. This is done by various holders that can be made by themselves from PVC pipes or purchased from fishing shops. Some anglers prefer to hold the rod in their hands, but with prolonged fishing it is tedious, so stationary fastening is preferable.
⚠️ Attention: When attaching the fishing rod to the board of an inflatable boat, make sure that sharp structural elements (tulip, knots) do not damage the cylinders. Use soft pads or special plastic holders with rounded edges.
Choosing a coil and fishing line for equipment
Small inertial coils, such as the popular Nevsky or their modern plastic counterparts, are most commonly used to complete the rod, the main requirement for the coil is the reliability of the brake and smoothness of the ride, although the speed of the winding does not play a decisive role here.
The diameter of the main line is chosen depending on the expected size of the trophies and the transparency of the water. For the middle strip of Russia and standard fishing conditions, the best choice will be a monophilic thread with a diameter of 0.20 to 0.25 mm. The use of wicker cords is justified only when fishing at very large depths or ultrastrong currents, where minimal extensibility is important, but in classic bream fishing monophiles are preferred due to their depreciation.
It is recommended to wind at least 30-40 meters of fishing line on the coil to have a margin for maneuver when catching and the possibility of quickly winding off the tackle when moving to another place. Color line It also matters: in clear water, it is better to use fluorocarbon or dark blue, green shades, which are less noticeable to fish. The supply of the line on the spoole should be such that the side of the line remains 2-3 mm, this will prevent spontaneous turnings.
Use a fishing line with a memory shape of the minimum level - on a short board, hovering in a spiral, it will constantly get confused and interfere with normal cut-off.
Installation of equipment: loader and hooks
The design of the rod can vary, but the classic version involves the use of a sliding loader or a blank tool with a drain leash. The weight of the loader is selected experimentally: it must confidently hold the bottom or bottom layer, but when pecking the bream should not feel resistance. Often used olive loaders weighing from 10 to 40 grams, depending on the strength of the current.
Leashes for catching bream are made of thinner fishing line, with a diameter of 0.12-0.16 mm Leash length plays a key role in the presentation of the nozzle: on a strong current use short leashes (10-15 cm), and on weak or standing water their length can reach 30-50 cm This allows the nozzle to naturally soar in the water stream, attracting the attention of fish.
The choice of hooks depends on the type of nozzle used. For a worm, a worm or a sandwich, long forearm hooks are optimal, the size is 10-No14 according to the international classification. If you plan to catch peas or corn, the forearm may be short, but the sting should be perfectly sharp. The color of the hooks is better to choose dark (black, grumpy) so that it blends with the bottom or is less noticeable against the background of the nozzle.
☑️ Checking the equipment before throwing
⚠️ Warning: Never use too thick leashes "just in case." Breath is a fish that is careful, and rough tooling can reduce the number of bites by 50-70%, especially during periods of passive pecking.
Tactics of searching for bream and working with sonar
The success of fishing from a boat depends 80% on the right location: bream is a schooling fish and tied to the bottom relief. Its main sites are dumps, brows, pits and exits. Using a sonar greatly simplifies the task of finding, allowing you to see the structure of the bottom and the presence of fish in real time. However, even without a sonar, you can find a promising point by studying a relief map or by measuring depths.
When you get to the point, you need to anchor properly. The boat is placed across the current or at two anchors (in the stretch) so that it does not heel or block the fishing area. It is important to fix the boat so that the fishing rods are in the zone of "clean water", without interfering with the anchor ropes. After the anchors are installed, you should feed the point by throwing a few bait balls upstream.
The process of catching is periodic twitching of the tackle or static waiting. Breath often takes a drop or break from the bottom of the loader. If there are no bites for 15-20 minutes, it makes sense to move several meters. The migration of the bream can be unpredictable, and finding an active pack is the key to success.
| Parameter | Weak current | Average current | Strong current |
| :--- | :--- | :--- | :--- |
| Weight loader | 5-10 g | 15-25 g | 30-50 g |
| Length of leash | 30-50 cm | 20-30 cm | 10-15 cm |
| Size of hook | №12-14 | №10-12 | №8-10 |
| Type of nod | Soft, long | Medium stiffness | Hard, short |
The secret to echoing
Pay attention not only to the arcs of the fish, but also to the structure of the bottom. The bream often stands on the border of the shell and silt, where it is easier to look for food, point-filling of bait into this border gives the best result.
Brushing and onboard fishing nozzles
Boat feeding should be heavy and inert, so that it is not carried away far by the stream, but washed away directly at the point of catching. The mixture must be added to the soil from the shore or clay for weighting. The basis of the feeding is breadcrumbs, ground biscuits, fried seeds and special bream flavors (vanilla, anise, coriander, garlic).
Bream nozzles are varied, but there are universal favorites: dung worm, squirrel and moth work almost always. In summer, plant nozzles such as steamed peas, barley, canned corn show great results. Fishers often use sandwiches, combining animal and plant components on a single hook, which increases the likelihood of petting a moody fish.
It's important to remember the consistency of the nozzle. It should be firmly hooked, but not "wooden." Peas, for example, should be boiled to a soft state, but retain their shape. When fishing on the nozzle, it should be accessible to fish, so the hook with the nozzle is often lifted above the bottom, playing with the tackle.
The key to bait: add a little bit of the nozzle you're going to catch (cut worm, corn grains) to the balls, which will make the bream look longer for food at the point and increase the chance of catching.
Techniques of Survival and Safety on Water
The way you take a bream out of a boat is different: you can't force a fish up, especially a big one, you can force a bream on the surface of the water to resist, and you can get a line around the anchor rope or the boat itself, and you can get a fisherman to tire the fish deep by holding a stretched line, and only when it stops resisting, you can bring it to the board.
A hand-drawn lift is a must, a large bream is dangerous and uncomfortable, there is a high risk of a leash breaking at the last minute, a taper should be with a long handle or telescopic so that you can take the fish without getting out of the boat and without upsetting the balance.
Safety on the water is priority number one. Fishing from the board is often conducted at depths where accidental falling into the water can be dangerous. Having a life jacket, an anchor float and a serviceable boat is a must, and it is also worth remembering the rules of behavior on the water and not overloading the boat with equipment.
⚠️ Attention: When catching a large bream, watch the position of the hooks. Once on board, the fish begins to beat, and the hooks can get into the arm or get tangled in clothes. Always use a yawn or extractor to extract the hook.
Frequently Asked Questions (FAQ)
Can I catch with side fishing rods from an inflatable PVC boat?
Yes, you can, and you should. But you have to be careful when you install the holders, so that the sharp parts of the gear do not punctured the cylinders, you better use soft mounts or hold a fishing rod in your hands, and you should also consider the sailing of an inflatable boat, in high winds it can be demolished, which will make it difficult to catch.
Which bait works better on the breeze: shop or home?
Both options are right to life. Store mixes are comfortable and stable, but homemade bait (peas, millet, cake) often outperforms them in efficiency, as they contain large fractions that last longer to hold fish at the point. Experienced anglers often mix them.
Why does the bream stop pecking in the middle of the day?
Breath is a fish that is sensitive to light and temperature, and on a bright sunny day it may go deep or stop eating, and it may also be caused by a change in pressure or wind direction, which can be helped by changing the nozzle to a more active one (for example, switching to a worm) or switching to fishing in the shade of a boat / awning.
Do I need a sonar to catch the rods?
Sound sounder is not strictly mandatory, but it greatly improves the efficiency of fishing, allowing you to find specific bumps and pits where the fish is. Without sonar, you have to rely on the knowledge of the terrain or the pumpkin method, which takes longer. For a beginner, the sonar will be a great assistant in the study of the reservoir.