Fishing from a swimming facility opens up completely different horizons for the angler than shore fishing. Being able to stand over a deep pit, swim to reed thickets or anchor in the fairway allows you to get trophies that are not available from land. However, the specifics of a floating platform dictates its strict requirements for tackle. Conventional spinning or fly fishing rods here often prove uncomfortable, cumbersome and even dangerous.
That's why. fishing-rod It's a compact, durable, specialized rod designed to work in the confines of a boat, and it allows you to effectively capture the bottom horizons, keep the gear under control even in high winds or currents, and respond quickly to a predator or a peaceful fish.
In this article, we will discuss in detail the design features of such rods, compare different types of sidebars and consider the nuances of their operation. You will learn why the length of 1.5-2 meters is optimal, how to properly equip the gear for catching bream or perch, and what mistakes beginners make when choosing the first board.
Design features of on-board rods
The main difference between a fishing rod and a classic spinning or feeder is its geometry and materials. Because the angler is directly above the fishing point, the range of the throwing does not matter here. The gear goes vertically or at a slight angle down. rod-length This is rarely more than 2 meters, and most often it is from 1.2 to 1.8 meters, which allows you to comfortably control the tackle, sitting on a bank or in a chair, without touching the board or neighboring anglers.
The second critical parameter is stiffness and sensitivity. boarding-off It should have a stiff enough stiffness to safely fish vertically, without the ability to put a rod on the water to quench the jerks, as is done in coastal fishing, but the top should be informative. Many models are equipped with interchangeable quivertypes of different rigidities, which similar to feeders, but on a reduced scale.
The materials are the same as those used in expensive spinning machines: high-module graphite, carbon fiberglass, but the requirements for fittings are increased. Passage rings The sleeves are often larger in diameter, so that the line or cord does not get confused with frequent lowerings and ascents. The handle is made of materials that are not afraid of water - EVA or high quality corks, since contact with water and splashes is inevitable here.
⚠️ Warning: Never use long rods (more than 2.5 meters) in a small PVC inflatable boat. When wind or abrupt movement, such a rod can become a lever that will punch through the balloon or knock the paddle out of the key.
So, you have to pay special attention to the whiplash, and unlike spinning, where range is important, speed of reaction is important. Strike. The rod is usually fast or superfast, so that when you cut it at a depth of 5-10 meters (which is often the case when you catch a boat), the energy is transferred to the hook instantly, without cushioning the form, and a sluggish form simply does not allow you to make a high-quality cut at the depth.
Types of cabins: from classics to winter options
The fishing gear market offers several varieties of rods that can be adapted or used as onboard ones, and understanding their differences will help you choose the perfect tool for specific conditions.
- 🎣 Classic side fishing rods: A specialized tool with a length of 1.5-1.8 meters. often have a coil shifted up or down, a convenient short handle and a bright colored tip for visual inspection.
- ❄️ Winter fishing rods for flaming: Many anglers successfully use durable winter anglers (for example, the use of a silk-blocker). Salmo or Norfin) up to 1 meter long, ideal for plumb fishing, but require a very close hand to the nod.
- 🎍 Telescopic fly rods: Budget option: they're lined, they're wired, they're wired, they're wired, they're coiled, they're heavier than carbon fiber, but they're easy to handle and cheap to replace.
The so-called “nod boards” deserve special mention: these are short (up to 1 meter) hard anglers with a powerful lausan or metal nod. They are designed exclusively for fishing for a snorkel or a light splash in a plumb. For bottom fishing with a loader, they are less suitable due to the short length and lack of the possibility of throwing (if it is suddenly necessary).
There are also models with labels. Boat or Short in the name of famous brands like Shimano or DaiwaThese are typically shortened versions of popular spinning series, and they have the advantage of years of reliability and balancing, but the price of such specialized Japanese can be high, which for many anglers who use the boat only a few times a season is excessive.
Selection criteria: length, test and structure
When choosing a gear, you need to be clear about what fish you plan to fish in and under what conditions. There is no universal solution, but there is a middle ground. For most tasks on rivers and reservoirs, the optimal length is the range of 1.6-1.8 meters.
The rod test The second parameter is that if you're fishing on the flow and using heavy loads (80 to 150 grams), you need the appropriate upper limit of the test, and it's dangerous to overload the form, it changes its structure, makes the top "wooden" and can break when you snatch. It's also bad to underload, the tackle will lose sensitivity.
| Fishing conditions | Recommended length | Test (gr) | Typical mining |
|---|---|---|---|
| River with strong current | 1.5 - 1.7 m | 40 - 100 | Breath, bluish, gustera |
| Reservoir (depth) | 1.8. - 2.1 m | 20 - 60 | Sudak, bersch, bass. |
| Overgrown sanks | 1.2. - 1.5 m | 10 - 30 | Carp, rat, pike |
| Fishing in the plumb (predator) | 0.6 - 1.0 m | 5 - 25 | Sudak, bass, catfish |
When you're in formation, remember the depth. At great depths (over 6 meters), a line or cord creates a lot of pressure (flow), a soft form can just fold up in an arc, and you won't see a bite. speed-up For shallow water or for catching cautious fish in clear water, you can afford a more parabolic bend that better cushion the jerks.
If you plan to catch at night, choose a fishing rod with interchangeable tops, where one of them will be painted in a fluorescent color, or buy fireflies in advance to attach to the cyvertype.
Equipment of the side fishing rod: coils and lines
The right tooling is half the success. For the rod, the coil is not so much for throwing as for keeping the line and catching. The most popular non-inertial coils are 2000-3,000 in size according to the classification. ShimanoThey're compact, they have a good friction, and they allow you to pick a fishing line quickly.
However, many experienced boaters are moving to multicoil Or even simple inertial Nevskys (modern, high-quality) Why? Because when you're fishing plumb or short overhang fishing line, the beards can be made when you drop them, and the multiplier allows you to control every inch of the descent with your finger, and the multiples are more powerful and compact.
As for the line, there is a monophile.wicker) They're also used, especially for predators, but they have disadvantages: At the depth, the cord sails very hard, it drifts with the current, and it collects more algae. Monophile fishing line with a diameter of 0.20-0.30 mm stretches, which helps to extinguish the jerks of large fish near the side when the rod is already raised high. For catching bream on the current often use a combination: the main line of 0.25 mm and fluorocarbon leash of 0.18-0.20 mm.
The tooling also has its own peculiarities: often a scheme with a draw leash or a sliding loader, the main rule is to minimize the number of knots and extra elements that can catch on board the boat or get confused when catching.
☑️ Checking the equipment before exit
Tactics of fishing from the board: cuckooing and feeding
Catching from a boat requires discipline. Unlike the shore, where you can swing, every movement here has to be calibrated. The first thing you need to do is anchor properly. The perfect stretching scheme or nose-to-current anchoring is for fishing fishing rods. The boat has to stand dead. If it is rolled from side to side, you will constantly be hitting the gear by the anchor tile or the board.
Feeding is key. Feeding from a boat is much more efficient, because you can see the bottom relief (if you have a sonar) and you can get the food exactly to the point. You use dump truck feeders or cone feeders. You need to create a feed pole that won't be quickly swept by the current. So the feed is often mixed with clay or soil from shore.
⚠️ Attention: When fishing on the current, always position the boat with your nose against the flow. If you stand sideways, the sailing of the boat and gear will create a strong tension, and control of the fishing rod will be lost.
The technique of wiring or angling in static depends on the object. Bream and carp are more often caught in static, waiting for a confident pull; Sudak and perch are active play, twitching the rod; On-board fishing rod allows you to feel the lightest touches of the fish, which on a long spinning would not be noticeable.
Safety and storage of gear on the boat
The boat is a place of high danger. Sharp hooks, heavy loaders, slippery surfaces. Onboard fishing rods are less dangerous than long spinning, but they require proper storage. Never leave the gear just lying on the bottom of the boat where you can step on it. Use special holders (rod-holders) that are attached to the board or transom.
When transported, especially in inflatable boats, the knees of the rod are better separated or hidden in a tube. Carbon is afraid not only of impacts, but also of pinching. Often breakages occur when things are folded into a backpack, when a heavy motor or anchor presses a thin form.
Carbon fibre is a great conductor, and if you're in a thunderstorm, put your fishing rod in water or in a special case, but don't hold it over your head.
How do you save a drowned fishing rod?
If the rod does slip out of your hands and fall overboard, it probably won't sink immediately (unless it's pure graphite without floating elements), but it will get into the handle. You use special crimson to lift or just swim up quickly on paddles. The main thing is not to make sudden movements so as not to catch the fishing line by the engine screw.
Frequently Asked Questions (FAQ)
Can you use a regular spinning length of 2.1 meters as a side fishing rod?
Yes, you can, especially if it's a lightweight and sensitive spinning, but it's going to be harder to drive in a cramped boat, it's going to cling to clothes, awnings and neighbouring anglers, and it's going to be fine for one-off fishing, but it's better to buy a specialized short tackle for regular fishing.
Which coil is better for the sidebar: non-inertial or multiplier?
For beginners and peaceful fish, the non-inertial coil (meat grinder) is more convenient, and easier to drop a line. For catching a predator in a plumb and working with heavy loads, experienced anglers often choose a multiplier for its power and direct contact with the fishing line.
Do feedergams need to catch from a boat?
The use of a feedergam is justified if you're fishing on a wicker cord and you're counting on a large, strong fish, and it helps to quench the jerks, because a short, hard rod is not enough to absorb the shock. When you're fishing for monolesque, you don't usually need an additional shock absorber.
Which fishing line to choose for night bream fishing?
For night bream fishing, a high-quality dark-colored monolesque (black or brown) with a diameter of 0.22-0.25 mm is preferable. It is less noticeable in water when illuminated by a flashlight and is better stretched, which is important when visual control of the top is limited.
The main secret of successful fishing from a boat is not the length of the fishing rod, but the correct anchoring and the ability to silently manage the tackle in a limited space.