Fishing from a swimming facility is radically different from coastal fishing, requiring the fisherman not only to know the habits of the fish, but also to competently equip the vessel itself. spinnerFor inflatable vessels, where rigid installation is often impossible or undesirable, the best solution is to use a fastener on the boat. lyctrose - a special cable running along the perimeter of the balloon.
Choosing the right fishing rod fixer is not just a matter of convenience, but also the safety of expensive equipment on the water. The wrong design can damage the side or not withstand the jerk of a large fish, which will lead to the loss of a trophy. universal-holderHow to install them without drilling and what to pay attention to when buying.
Modern market of accessories for PVC It offers a variety of options, from budget Chinese models to professional stainless steel models. Understanding the design features will help you avoid common mistakes and choose a product that will last for many years.
Design features of holders on lyctros
The basis of any holder attached to the lyctross is a fixation mechanism that covers the cable and the cylinder. Unlike the transom models, the load is distributed differently, which requires increased strength of materials. plastic with rubber seals or all-metal structures of anodized aluminum.
The key element is a clamping mechanism, which must be securely fixed to the lyctross, but not overly clamping it. eccentricOther options include more static attachment with screw clips, which ensure maximum immobility.
Why is lyctross important for fastening?
Liktros is a power cable sewn into the shell of the PVC boat. It is he who takes the main load when tensed, so attaching to it is the most reliable way to install attachments without the risk of damaging the balloon itself.
It is important to consider the angle of the glass, as it affects the position of the rod in the water.
- 🎣 Vertical glass - Ideal for storing fishing rods in a transport position or when fishing in a plumb.
- 🎣 Sloping glass (45 degrees) - most popular for spinning fishing in wiring, allowing the fishing line to freely come out when pecking.
- 🎣 Horizontal holder - used to store long rods along the side so that they do not interfere with rowing.
When choosing between plastic and metal, it is worth remembering the weight and corrosion resistance. Stainless steel It can withstand any load, but it can be heavier. Good engineering plastic doesn't rust at all, but it needs to be handled carefully at low temperatures.
Advantages of using lyctrose fasteners
The main advantage of such holders is the absence of the need to drill the sides of the boat. For owners of expensive models of PVC is a critical aspect, since any violation of the integrity of the cylinder can lead to the loss of the manufacturer's warranty. lyctross It fully maintains the sealability of the boat.
Mobility is another big argument for this design, and you can easily move the holder from one side to the other, or remove it completely, if you want to fish without spinning. small-boatWhere space is limited.
In addition, these holders often have a universal glass design, suitable for different diameters of the handles of the rods. fixing-hole Sound sounders or buzzers, which turns them into multifunctional platforms.
⚠️ Attention: Do not install the holder in areas of lyctross where there is a noticeable rubbing or damage to the shell. The pressure of the clamping can aggravate the defect and lead to etching of air.
The versatility of the application allows the use of such mounts not only on inflatable boats, but also on kayaks or kayaks equipped with similar mounting systems, which makes the purchase a useful investment for any waterman.
Manufacturing materials and their impact on durability
Aggressive aqueous environments, ultraviolet light and temperature changes dictate their material requirements. Cheap models are often made from conventional ABS plastic, which can become brittle over time. sea-aluminum or composite materials with UV stabilization.
Metal elements such as bolts and screws must be made of stainless steel brand 316L Or you can have a quality zinc coating, and ordinary steel will rust after the first season, and the rust can spoil the look of your boat.
Rubber pads are not only a sealer, but also a shock absorber, preventing rods from flowing and quenching vibrations from the side. EPDM rubber It does not dry out in the sun and retains elasticity even in cold weather.
| Materials | Strength | Weight. | Resistance to UV | Price. |
|---|---|---|---|---|
| ABS plastic | Medium | Low. | Low. | Low. |
| Stainless steel | High. | Highly | High. | High. |
| Aluminum D16T | High. | Medium. | High. | Medium |
| carbon | Very high. | Low. | Very high. | Very high. |
When choosing, pay attention to the quality of casting or metal processing. The presence of burrs or sharp edges is unacceptable, as they can damage not only the lyctros, but also the clothes or hands of the fisherman.
Instructions for installing the holder on lyctros
The installation process is quite simple and does not require special tools, but compliance with the technology will ensure reliable fixation. Before installation, it is recommended to clean the surface of the balloon and lyctross from sand and dirt so that the abrasive particles do not damage the material during puffing.
First, you need to loosen the clamping mechanism and put the holder on board the boat so that the groove perfectly embraces the lyctross cable, then a preliminary puff is made, after which you need to check the position of the glass relative to the water.
☑️ Verification of the holder's installation
The final puff must be done with enough force to prevent displacement, but without fanaticism, and excessive pressure can deform the balloon, which is especially dangerous in hot weather, when the pressure inside the boat is already increasing.
If the holder has an adjustable angle of inclination, adjust it according to the type of fishing. For bottom fishing, the rod is placed almost vertically, and for fishing in wiring, at an angle of 45-60 degrees to the surface of the water.
⚠️ Attention: After installation, be sure to shake the holder with the rod installed. Luft is unacceptable - it indicates a weak puff or improper selection of the model under the diameter of your lyctross.
Overview of popular models and brands
There are many manufacturers, both domestic and foreign, in the Russian market, and the leaders of the segment are often companies specializing in marine accessories, such as marine accessories. Norfin, Flagman or SalmoTheir products are subject to strict quality control.
The budget segment is represented by a lot of "nouneime" products from China, which can be quite functional, but require careful check before buying, often with a weaker spring mechanism or thinner metal.
Premium models can be equipped with a 360-degree rotary mechanism, which allows you to quickly change the direction of the rod without removing it from the mount, which is especially convenient when catching trolling or changing horizons often.
When buying, pay attention to the equipment: the presence of all the necessary bolts, nuts and rubber gaskets will save you from searching for analogues in fastener stores.
It's also worth mentioning the homemade options that are often crafted by experienced fishermen. water-pipe and clamps, you can create a working analogue, but the factory product will always be more aesthetic and reliable.
Care and maintenance in the offseason
Proper care of the equipment prolongs its life. After each fishing, especially in salt water, the holders must be rinsed with fresh water. The salt, drying, crystallizes and can jam the moving parts of the mechanism.
Before long-term storage (winter), it is recommended to lubricate the threaded joints and movable hinges with silicone lubrication. This will prevent oxidation and freezing of parts to each other.
It is better to store the removed holders in a dry place, packed in a fabric bag to avoid mechanical damage.
Regular lubrication and washing with fresh water is a guarantee that your holder will not jam at the most inopportune moment on fishing.
Carefully inspect rubber seals before each season, and if they have cracked or lost their elasticity, they must be replaced so as not to scratch the boat cylinder.
Frequently Asked Questions (FAQ)
Can I use a lyctross holder for heavy rods?
Yes, most modern models are designed for standard spinning rods, but for very heavy tests (jigs over 100 grams) or powerful sea gear, it is better to use reinforced metal versions with additional support points.
Will the clamp lyctross damage during prolonged operation?
If you install the regular rubber gaskets properly and use them properly, no. Lyctros is designed for high loads. Problems can only arise if you forget the gaskets or pull the screws to deform the cylinder.
Will the boat holder be suitable without lyctross?
No, it's designed specifically for hooking the cable, and for smooth sides without lyctross, there are other types of fastenings, like suction cups or timbers.
How to remove the holder if the screws are boiled?
Use a penetrating lubricant (e.g. WD-40) and give it time to act. Don't put too much effort right away so you don't rip the thread off. In extreme cases, you can carefully heat the metal part with a hairdryer, avoiding hot air on the PVC.
Competently selected and established spinner Turns fishing into a comfortable experience, allowing you to focus on the fishing process, and we hope that our recommendations will help you make the right choice and equip your boat with the best equipment.