Buying an inflatable watercraft is just the beginning of the journey to the perfect water holiday, and the basic equipment offered by the plant usually includes only cylinders, cans and remixes, which are absolutely not enough for serious fishing or long walks. boatside They are the object of close attention of each owner who wants to improve comfort and safety on the water.
Well-chosen equipment turns a simple inflatable boat into a full-fledged fishing boat. transom wheels A reliable spinning holder can change the experience of operation, and in this article we will discuss which accessories are really necessary and which can be considered as excess, and how to properly install them.
It's important to understand that the choice of additional elements depends on the type of water body and the way you fish. For standing water, some solutions are priority, and for stormy currents or seas, completely different. Let's take a detailed look at the key categories of equipment, without which it is difficult to imagine modern tuning.
Anchor system and parking elements
One of the first purchases after the boat itself should be a quality anchor. Standard cats, which come with budget models, often prove useless in the current or wind. You need a device that can hold the boat with passengers and cargo without damaging delicate delicate. PVC coating.
The best solution for inflatable boats is the fungus anchor or Denforth folding anchor, which provides excellent ground grip and has rounded shapes without sharp corners. It is advisable to use a special bag bag-bag that is attached to the nose handle for storage and descent.
⚠️ Warning: Never tie the anchor thack directly to the rump ring on the nose without using a burst insert! In high winds or currents, the boat can flip or tear the handle, which will lead to the loss of the boat.
For fixing the position of the boat is also often used anchor-line The cable should be at least 3-4 times the depth of the reservoir where you plan to fish, which ensures the right tension angle and reliable fixation.
transom wheels and ease of movement
Moving a boat along the shore is one of the most time-consuming processes, especially if you're fishing alone, and installing transom wheels allows you to roll the boat like a cart, significantly reducing the load on your back. boatside.
There are two main types of attachments: removable and foldable. Removable models are completely dismantled when driving on water, which eliminates water resistance and the risk of hooking. Foldable options are raised up and fixed with special clips, which is convenient, but requires reliable fixation so that the wheel does not fall spontaneously.
When choosing, pay attention to the diameter of the wheels. Small wheels are suitable for sand and flat asphalt, but for rough terrain, grass and gravel, wheels with a diameter of at least 260-300 mm are necessary. Metal axles should be protected from corrosion, since contact with salt or fresh water is inevitable.
When installing transom wheels, lubricate the metal pins with lithium lubrication before each installation, which will prevent metal from boiling and make it easy to remove the wheels even after prolonged contact with water.
Electrification: battery, pump and light
Modern fishing is unthinkable without electricity. Even if you don't have an electric motor, you need power for a sonar, a navigator, an LED tape and a pump, and the basis of the system is a sealed battery that needs to be properly placed and protected.
For inflatable boats, it is critical to use sealed boxes (a box) with a protection class of at least IP67. A regular plastic box can let water through when turbulent or raining, which will lead to a short circuit. Inside the box, the battery must be rigidly fixed to prevent it from moving along the cockpit.
Electric foot or battery pumps are ideal for pumping boats in the field, allowing the vessel to quickly return to working condition without physical effort, and using special wiring with safety locks to protect the chain from overload.
| Type of equipment | Consumption (A) | Recommended capacity of AKB | Features of installation |
|---|---|---|---|
| LED tape | 0.5 - 1.5 | Anybody (7-12 AH) | Slugged on the low-fat side |
| Echoer (5-7) | 0.2 - 0.5 | From 12 AH | Fixing on a jar or transponder |
| Electron pump | 10 - 20 | From 20 AH | Short-term connection |
| Electric motor (traction) | 30 - 60+ | From 50 Ah (GEL/AGM) | Only on the transom or nose. |
☑️ Electrical checks before the season
Navigation and sonar
Fish hunting and orientation on unfamiliar waters are impossible without a sonar and GPS navigation. The market offers a variety of models, from simple single-beam to complex cartplotters. For PVC boats, compactness and the ability to quickly install / dismantle are important.
Sound sounder mounting is a separate topic, and inflatable boats cannot use rigid transom mounts that can damage the balloon when impacted. floating-pin Or suction cups that are attached directly to the balloon, and they allow the sensor to move freely when it hits an obstacle.
The screen is best placed on a rotary bracket attached to a can (seat) or a special table, which provides convenient visibility and protection from splashes. Remember that salt water aggressively affects the electronics, so after fishing, all the appliances must be wiped with fresh water.
⚠️ Warning: Do not leave the sonar and navigator in direct sunlight in a closed boat. The temperature inside the inflatable tubes can reach 60-70 degrees, which will cause the screen to burn out or the electronics to fail.
For those who like night fishing or just want to be safe in the dark, it is mandatory to install running lights. According to the rules, the boat must have a white circular light visible from all sides. For PVC boats, there are special masts-holders that are inserted into the floorboard or attached to the keys.
Comfort and fishing accessories
Long stays on the water require a comfortable environment. Hard inflatable cans quickly tire the back, so soft seats with backrests are one of the most popular. boatsideThey are strap-mounted to cylinders and allow you to sit comfortably for several hours.
For storage of gear, food and personal belongings, sealers and hard heroes are ideal. Conventional bags get wet quickly from splashes or rain. Herobox also acts as an extra seat or table. Inside the boat, organizers for spinning and holders for glasses maintain order.
The secret of a comfortable night in a boat
For an overnight stay in a PVC boat, you need a special inflatable mattress that replicates the contours of the cockpit, and a mosquito canopy net. Without a net, a night out on the water will become torture due to mosquitoes and midges that fly into the light and heat.
Sun and rain protection is also a comfort feature, shelter awnings (houses) that protect against scorching heat and sudden downpours, and are mounted on arcs that are inserted into pockets or cylinder mounts, allowing you to fish or rest without suffering from weather conditions.
Boat protection and maintenance
The life of your boat depends on how you care for it and what protective measures you take. ribbon The keel and stringers are a necessity. The tape takes on the main abrasive wear.
To protect the sides from hooks, scissors and sharp objects, anglers use special pockets-organizers made of PVC fabric, which are glued to cylinders, which are convenient for storing passatizhi, yawners and other small things, freeing hands and protecting the material of the boat from punctures.
Regular washing and drying are the key to longevity of seams and valves. After every fishing, especially in salt water, the boat should be rinsed with fresh water. Sand left in the folds works like sandpaper when the boat is rolled up.
The safety tape per keel increases the life of the bottom by 2-3 times and keeps the presentation of the boat at sale. It is an investment that pays off with no costly repairs.
Frequently Asked Questions (FAQ)
Can I add additional elements on my own?
Yes, most accessories (pens, holders, pockets) can be glued on their own, using a two-part polyurethane adhesive specifically for PVC. It is important to carefully degrease the surface and maintain the temperature regime when glued.
Which battery is better to choose for a PVC boat?
PVC boats are best equipped with AGM or GEL batteries, which are airtight, do not emit gases when charging (which is important in a confined cockpit space), and are not afraid of tilting. Lead-acid starter batteries are not recommended because of the risk of acid spillage and vapor release.
Should I wash salt off the boat immediately after fishing?
Absolutely. The salt crystallizes and corrodes the PVC material, and it also breaks down the suture tape and glue. If you can't wash the boat with fresh water right away, at least wipe it thoroughly with a wet cloth and wash it completely at home.
What is a tear insert and why is it needed?
A fouse link is an element of the anchor system that breaks when a critical load is placed (for example, if the anchor is stuck between rocks) and saves the anchor cable from a cliff and prevents the boat from dragging inexorably to the anchor, which can lead to a coup.