Finding a reliable fishing boat or outdoor activities often leads to a model. Girgis 390This size is considered the middle ground between compact two-seaters and full-fledged keel boats for trophy fishing, which fishermen value for the balance between load capacity and weight, making transportation in the trunk of a passenger car a real task, not a complex logistics operation.
The question of cost is now particularly acute, as the PVC products market is experiencing constant fluctuations in prices for materials and components. Price of Girgiz boats 390 It depends on the chosen modification, the density of the reinforced PVC used and the availability of additional options in the basic configuration. Understanding these nuances will allow you not to overpay for unnecessary functions or, conversely, not to buy too lightweight design for your needs.
In this review, we will look at the final check amount, what factors are driving the price increase this season, and what you should look for when buying a really high-quality product, and we will analyze the specifications that justify the claimed cost and compare them with competitors in this price segment.
Factors affecting the cost of the boat Girgiz 390
The first thing that catches your eye when looking at the price lists of various stores is the price spread, which is not only driven by the appetite of the sellers, but also by objective technical specifications. The key parameter is the density of fabric. The standard solution for budget versions is a material density of 750-850 g / m2, while reinforced versions that can withstand more severe operation and rocky shores are made of fabric density. 900-1100 g/m2The price difference here can be as high as 20-30%, but it is fully justified by the service life of the product.
The second important aspect is the design of the bottom, which is that inflatable keel modifications (BNDMs) are always more expensive than plywood or aluminum floorboard versions, because of the complexity of the cylinder itself and the need to use stronger materials to compensate for the loads. Girgis 390 NDLD provides better performance and glides with lower engine power, which saves fuel in the long run.
The final amount is also affected by the quality of the fittings and equipment, the presence of reinforced hinge beams around the perimeter, quality handles for carrying and reliable valves for air infusion (for example, systems). Marine 300Cheap analogues often save on these elements, which leads to rapid wear in places of friction on the side of the boat or berth.
- 🛡️ Material density: The use of reinforced PVC of increased density (from 900 g / m2) significantly increases resistance to punctures, but increases the weight and price of the product.
- ⚓ Bottom type: Low pressure inflatable floor (LDP) costs more than the prefabricated, but provides comfort and speed that plywood cannot afford.
- 🎁 Package: Having a backpack bag, remix, pump and seats in a basic set can reduce the total cost of buying compared to buying accessories separately.
⚠️ Attention: The excessively low price of the Girgiz 390 should be a warning, often a sign of using substandard PVC or a violation of the suture gluing technology, which can lead to divergence of water cylinders.
Why does the price change throughout the year?
PVC boat prices are seasonal. In early spring, in the midst of pre-season hype, the cost is maximum; in autumn and winter, manufacturers often give discounts of up to 15-20% to vacate storage space; buying a boat in the off-season is a proven way to save a substantial amount.
Comparison of modifications: NDND vs. solder version
The choice between an inflatable floor and a hard floorboard is essentially a choice between comfort/speed and versatility/loading capacity. Girgis 390 They're usually cheaper, and they're made from separate sheets (plywood or aluminum) connected by profile stringers, which are more rigid to bend, so you can feel more confident when you're fully loaded with your gear and two adult passengers.
But it takes longer and more physical effort to build a solder boat, and you have to pump the cylinders, and you also have to monitor the pressure in the keel cylinder (if you have one). The NDNDM versions are assembled in 5-7 minutes: rolled, pumped, put a transom and seats, but for this speed you have to pay a higher price and accept that the inflated bottom is more sensitive to sharp objects at the bottom of the reservoir.20
In terms of performance, NDND is superior to the soldering brethren. The lack of joints between the floor sheets and the more streamlined shape of the keel make it easier for the boat to glid, which means that you may need a lower-powered motor to achieve the same speed, which is also a form of savings, albeit indirect.
The weight is also important to consider when choosing a plywood-bottomed solder boat, which will be significantly heavier than its NDND counterpart, because of the weight of the sheets and profiles themselves. If you plan to go down to the water alone and carry equipment far away, every kilogram counts, in which case the overpayment for a lighter but more expensive design may be justified.
Analysis of technical specifications and their impact on price
The dimensions of the 390 cm model imply a certain capacity and load capacity. Standard load capacity for such boats varies in the range of the size of the model. 500-700 kgThis allows you to place on board two people of medium size, the engine, battery, anchor and the required number of gear, increasing the buoyancy margin is achieved by using larger cylinders, which automatically leads to an increase in material consumption and, as a result, an increase in price.
The most important element of safety and comfort is the size of the cockpit zone (useful space). In cheap models, cylinders can be overblown, eating usable space. Girgis 390 Engineers keep balance: the diameter of the cylinder (usually 45-50 cm) provides a good height of the board for protection from splashes, but leaves enough space inside for the legs and place the drawers.
Tran (the rear board for mounting the engine) also affects the cost. In budget versions, it can be a simple plywood board, lined with licre. In more expensive trim levels, the transan is reinforced with fiberglass or has an adjustable angle of inclination, which allows you to fine-tune the boat’s differential for a specific engine and load.
| Characterization | Basic version | Enhanced version (Pro) | Impact on price |
|---|---|---|---|
| Materials | PVC 850 g/m2 | PVC 1100 g/m2 (5 layers) | High (+25%) |
| Bottom | Plywood plywood | NDND (inflatable) | Average (+15-20%) |
| Stitches | Glue (flop over) | Cast or welded | High (+30%) |
| Load capacity | 500 kg | 750 kg | Low (+5-10%) |
Special attention should be paid to the technology of joining elements. Hand-made adhesive seams require a high skill of a master and a high-quality two-component adhesive. The disruption of technology leads to stratification. The cast or welded seams typical of top-end models create a monolithic design, but require expensive equipment, which is reflected in the retail price of the boat.
When buying, pay attention to the smell of the boat. A sharp, unpleasant chemical smell can indicate the use of cheap glue or poor-quality plasticizer in PVC, which will eventually make the material brittle.
Real cost of ownership and hidden costs
Buying a boat is just the first step in spending. Girgis 390 It has been a long time and has pleased you on the water, you need to take into account the associated costs. Often advertised price in the store is "basic" and does not include the necessary accessories, without which full operation is impossible or extremely inconvenient.
First of all, it's a pump. Often comes with simple foot or hand-held "frogs" that are suitable for pumping, but pumping them to a boat of 390 cm zero (especially in cold weather when pressure drops) is a laborious task. An electric pump that runs on a battery costs extra money, but saves your energy for fishing.
It is also worth budgeting for maintenance. Although PVC material does not require complex maintenance, special cleaning products, UV protection and color restoration will be needed over time, and if you plan to keep the boat assembled or in a garage, you may need to buy a special awning or case that does not always come with a complete package.
- 🔋 Battery: An electric pump and motor (if electric) will require a reliable traction battery, which can cost up to 30% of the price of the boat itself.
- 🚤 Anchor system: For a boat with a length of almost 4 meters of normal cargo of 3-4 kg will be small, you will need a full anchor weighing 5-7 kg and a reliable float, which is also an expense.
- 🛡️ Defense: Kevlar ribbon on the bottom or removable linings (sliders) will help protect the expensive bottom from abrasion on the sand and stones when pulling ashore.
⚠️ Attention: Don't skimp on sling wheels. For a Girgiz 390 with a motor and battery installed, the weight of the structure is great. Dragging it across pebbles or sand without wheels is guaranteed to damage the cylinders or bottom.
Where to buy and how not to run into a fake
The market is flooded with offers, and distinguishing the original from the artisanal copy can be tricky. - Official brand dealers gyrgiz Buying from hand or on dubious marketplaces from unverified sellers carries risks: you can get a boat assembled from defective material or with a violation of technology that no one will undertake to repair under warranty.
When you look at the boat, live or photograph, pay attention to the quality of the seams. They should be smooth, without glue leaks or bubbles. The width of the seam should be the same along the entire length. Any detachment, bloating or uneven coloration of the fabric in the seam is a sign of a violation of the process.
☑️ Checking the boat when buying
Also important is the availability of service support: large manufacturers have a network of service centers where you can order a valve replacement, a puncture patch or a stringer replacement. If you buy a boat from an unknown manufacturer at a bargain price, in case of a serious breakdown, you will most likely have to look for a master privateer, which may cost more than the initial savings.
Owner reviews and final evaluation (price/quality)
Analyzing the forums of fishermen and reviews of real owners, we can conclude that the boats are not the only ones that are considered. Girgis 390 They're a very stable niche in the mid-range, and users are finding that they're very stable and they're very good at wave-holding, which is a big indicator for a 3.9 meter size, and many people are switching from smaller two-seaters to a different comfort experience.
Some users complain about the weight collected, especially the versions with NDND and plywood floorboard in the kit. For women or people with disabilities, carrying such a boat alone can be a problem. There are also comments that the fabric in the budget series begins to fade over time (after 3-4 years of active use), although the leakage does not suffer.
In terms of price/quality, the model looks competitive, it's not the cheapest offer on the market, but it's not premium, which often pays for the brand, not the functionality, and it's a working tool for those who want to get the most out of it for a reasonable amount of money.
The Girgiz 390 is the best choice for an amateur angler looking for a compromise between size, comfort and price, ready to put up with the average weight of the product for good seaworthiness.
To sum up, if your budget allows you to buy a version with a reinforced bottom and high-quality fittings, then this purchase will be a long-term investment. If the budget is limited, the basic unit version will also cope with its tasks in calm water and with careful operation.
Frequently Asked Questions (FAQ)
What is the real payload of the Girgiz 390?
rated carrying capacity is usually between 500 and 700 kg depending on the modification, however, for comfortable and safe fishing with the possibility of active movement on the cockpit, it is recommended not to exceed the load of 350-400 kg (two people + motor + equipment).
Can I install a 390 engine with a capacity of 10 hp on Girgiz?
Technically, you can install, since the transom can withstand such loads, but this is not always advisable. For a size of 3.90 meters, the optimal motor is 5-8 hp. The 10 hp motor can lead to excessive burrowing of the nose in the wave when underloaded and increase fuel consumption without a significant increase in speed.
How long does it take to assemble a boat with NDND?
With experience and an electric pump, the assembly takes 5-7 minutes. For the first time or with a foot pump, the process can take 15-20 minutes. The solder version is assembled longer - about 20-30 minutes due to the need to lay and fasten the floor sheets.
Do I have to take a boat after every fishing trip?
If the boat is stored in a garage or outdoors under an awning, a full descent of air is not required, it is enough to put a little pressure on if the temperature is expected to rise (sun), however, for long-term storage (for the winter), the boat must be washed, dried and stored in an unstressed form at room temperature.