Catching a large bream on a strong current has always been considered the lot of experienced fishermen who know how to finely sense the behavior of fish and select the right tooling. "ring" The method has proven to be the most preying way to squirt this careful bottom fish in fast-flowing conditions, using a heavy feeder net that creates a powerful, attractive feeding plume, and a short leash that the fish takes when they are at maximum feed concentration.
For successful fishing, the availability of a boat is critical, since fishing is strictly vertical or with a small demolition, which is impossible to ensure from the shore. PVC boat Or metallic kandak, which allows you to stand across the stream and anchor, creating the perfect conditions for the presentation of the nozzle. Unlike bottom fishing from the shore, here the angler has complete control over the depth, the force of tension of the fishing line and the accuracy of the hook entering the bait trail.
In this article, we will discuss in detail all the nuances of equipment, features of the installation of the "ring" and tactics of finding bream parking lots. You will learn why the length of the leash plays a crucial role, how to properly prepare "dusty" bait and what mistakes most often lead to the descent of trophy fish. Proper preparation and understanding of flow hydrodynamics will allow you to consistently return from a pond with a full cage.
Principle of operation and advantages of the method
The ring fishing method is based on the bream's natural instinct to gather in flocks and feed where the current carries the most nutrient particles. When a heavy feeder sinks to the bottom, the flow of water begins to wash out the bait fractions, creating a long, visible plume for the fish. The RingAnd the bream, which slides down the main fishing line of the feeder, drops the hook with the nozzle exactly into the center of this table. When you go to the feeder, the bream first notices the moving nozzle and attacks it.
The main advantage of this gear is its incredible sensitivity and efficiency on the current. On standing water, the method does not work, because there is no feed spread, but on rivers with a flow rate of 0.5 m / s, it becomes the leader without alternative. A short leash does not allow the fish to move far away from the feeder, and a rigid connection through the ring provides instant transmission of a bite to the nod or the top of the rod.
⚠️ Attention: The use of ring fishing is restricted by fishing regulations in many regions. Be sure to check in local regulations before leaving whether feeder fishing is allowed and how many hooks are allowed on one tackle.
Another advantage is the ability to catch at great depths, where traditional donkeys often lose because of the sailing line, where the line is stretched vertically, and even a light wind or lateral current does not prevent you from seeing cautious breams. In addition, the method allows you to quickly change the horizon of the fishing, raising or lowering the ring to find active fish.
Set of tackle: rod, reel and nod
The long-range rods are not required to catch from a boat; the optimal length of the form is 1.5 to 2.1 meters; a longer rod will be inconvenient to operate in a limited area of the boat, especially when catching fish with your hand. The form must have a sufficient margin of strength, since the bream resists violently, and forced catching requires reliable fishing. rod.
The coil is used inertial (Nevskaya or its modern counterparts) or simple non-inertial size 2000-3000. The main requirement is the reliability of the mechanism and the ability to quickly drop the fishing line if necessary. Many anglers prefer the good old "wiring" coils for their simplicity and lack of inertia when eroding.
The nod is the angler's "eyes" in a given gear, which must be stiff to hold the weight of the ring and the sailing line on the current, but sensitive enough to register a bite. Often homemade nods from the hourspring or metal side nods are used. The length of the working part is 15-20 cm.
The main line is a wicker cord with a diameter of 0.12-0.16 mm or a monophile of 0.25-0.3 mm. The tile is preferable due to the lack of extensibility, which gives perfect transmission of the bite. However, on the crooked areas, the monophile can forgive more errors in hooks.
Installation of equipment: ring, feeder and leashes
The heart of the gear is the ring itself (or the egg), a 50-70 mm lead or steel ring with a line opening and an ear to attach the leash, solid rings and connectible rings ("eggs") that can be removed from the fishing line without breaking the gear, and the weight of the ring is selected so that it sinks confidently even in a strong current, but does not lie dead weight at the bottom.
The feeder is a mesh bag of 1.5-3 liters, sewn from a capron net with a cell of 5-10 mm. Inside must be placed a load (stone or metal bar) so that the full feeder does not carry the current. The feeder is attached to a separate cord to the boat or board.
The leash is the thinnest element of the system, it varies in length from 30 cm to 1.5 meters depending on the activity of the fish and the strength of the current. The more active the stick, the shorter the leash can be. To knit the leashes, fluorocarbon or a quality monolesque with a diameter of 0.14-0.2 mm. Hooks are selected by the size of the nozzle, usually No. 10-14 in the international classification.
☑️ Checking the equipment before throwing
The layout is as follows: the main line goes through the hole in the ring. At the end of the main line, a loop or a vertebral is knitted. To this vertebral rope is tied a leash with a hook. The ring is put on the feeder cord through a special incision (if it is an egg), or is worn in advance (if the ring is whole and the feeder cord allows).
Bedtime: composition and consistency
The success of ring fishing depends on 80% on proper bait, the main task of the mixture is to create a murky, appetizing plume that will wash out the current, but not saturate the fish instantly. The base of the bait should be inert, but glowing. The mixtures based on breadcrumbs, ground cake (sunflower or flaxseed) and millet porridge work perfectly.
It's important to balance the factions. Small fractions (dry, ground biscuits) create a cloud that attracts fish from afar. Large fractions (milk, barley, corn, chopped worms) hold the bream at a point. If you use only dust, the fish will come, spin and go. If only porridge, it will quickly become satiated.
| Component | Function | Share in mixture (%) |
|---|---|---|
| Breadcrumb | Creating mutty and fragrance | 40-50% |
| Pheno (boiled) | Keeping fish at a point | 30-40% |
| Ground cake | Aromatics and fatty matter | 10-20% |
| Grunt/Clay | Weighting and ligamentation | 10% |
The consistency of the bait should be such that it washed out in 15-20 minutes. Too sticky mixture will not work, too loose will be washed out in 2 minutes. It is better to check the mixture directly on the shore, lowering the feeder into the water at the boat. To enhance the effect, you can add flavors: garlic, anise, hemp, but during this process you need to be careful not to scare the fish away with chemistry.
The secret ingredient for bream
Experienced anglers often add a little bit of live feed, like a worm or a chopped worm, to the feeder, by mixing it with clay, which makes the bream dig longer into the bottom for a treat, increasing the time it spends on the spot.
Tactics of fishing and search for promising places
The choice of location is half the success. The bream on the river prefers to stay on the border of fast current and quiet zones, at the exits of pits, on brows and dumps. The ideal point for catching a ring is a flat section of the bottom (table) with a depth of 4-8 meters with a moderate current. It is difficult to hold on to the bream on too fast flow, and it goes on the edge.
The fishing process begins with anchoring. The boat must be anchored across the current ("cross") using two anchors, one on the bow, the other on the stern. This ensures a stable position and allows fishing from the board without being turned around by wind or flow. The distance to the feeder is usually 3-5 meters from the boat so that the feeding plume passes under hooks.
After the boat is installed, the feeder is lowered. The cord is pulled, and the hook is placed on it, the nozzle (worm, spit, barley) must be fresh. The nod is set to the working position, the fishing line is stretched. Then there is the wait. The bream pecking on the ring is usually confident: the nod is first slightly pressed, then there is a sharp nod or, conversely, straightening.
When fishing on a strong current, use a heavier ring or add a loader-olive above the leash so that the tackle sinks faster and less sail.
The technique of catching and typical mistakes
The way you take a bream off a boat is different, you can't pull a fish jerky when you cut it, because a thin leash can't hold it, you have to let the bream make its first jerk, you have to let it squish with the elasticity of the rod, and then you take the fish with your coil or pick a line with your hands, and you bring the fish to the surface, and at that point the bream is often frightened by the shadow of the boat and makes a "candle" -- a sharp jump up. It's important to give it some fishing line to avoid a cliff.
The hook when fishing for a ring is rarely used, more often the fish is taken with a hand in a glove or a special hook, since the bream by the time of approaching the boat is already quite tired of fighting the current. The main thing is not to let it go under the boat and confuse the tackle.
⚠️ Warning: Never wind a fishing line on your finger when catching a large fish! During the course of even a medium bream can make a powerful jerk, and a thin twig can deeply dissect the skin or even damage the tendon.
Typical mistakes of beginners: using too long a leash (fish does not reach the hook), too tight or too loose feeder, wrong choice of place (strapped or in the "pots"). Also a common mistake is noise in the boat - bream on the current hears blows on the bottom very well.
The key to success is to constantly experiment with the length of the leash and the horizon of the release of the ring, so if you don't bite for 20 minutes, change the distance from the bottom or the length of the leash.
Frequently Asked Questions (FAQ)
Can I catch a ring from the shore?
Theoretically, you can throw the feeder far away, but the efficiency of the method drops dramatically: from the shore, you can't create a vertical plane of delivery of the nozzle into the feeding plume, the fishing line will be severely demolished, and control of the gear will be minimal, the method is sharpened specifically for boat fishing.
Which one works best on the sleeve?
A bunch of dung worms or a combination of worms + pigs is considered a classic. In some water bodies, bream prefers barley, mastirka or peas. During the period of active zipper, even foam, painted yellow or red, which the fish catches reflexively, works.
Why does the bream go to the feeder, but does not bite?
The most likely problem is the length of the leash (too long or short for the given conditions), the size of the hook (too big) or the consistency of the bait (fish saturates quickly).
Do I need to add more to the point?
When fishing for a ring, additional bait balls are usually not required, since the feeder is constantly working, but if the current is very strong and washes the feeder faster than 10 minutes, you can throw a couple of balls with clay upstream to create an additional background.