Fishing with nets is not just a way of catching fish, but a whole science that requires a deep understanding of hydrodynamics, the behavior of aquatic life and specific techniques. fishing net It's impossible or highly inefficient without a boat, but professionals know that with the right training and the right equipment, you can do great things on hard ground. The lack of a boat dictates its conditions, forcing anglers to look for alternative methods of delivering gear to the fishing point.
The challenge is not only to throw the net a good distance from the water cut, but also to straighten it properly and then securely lock it in a given position. If a boat angler can maneuver to choose the perfect trajectory, then from the shore you have to rely on the force of the throw, the length of the cord and competent organization. rigging-loopIt's important to understand that every body of water is unique: what works on a quiet river may not be useful on a fast-moving or grassy lake.
In this article, we will take a closer look at all the nuances of the onshore installation of networks, from the choice of location to the final anchor anchoring, you will learn how to use the inertia of water and bottom relief to your advantage, which nodes guarantee reliability, and why. floating-cord And this is a critical element of design, and being ready to improvise and being safe are key factors for success.
Selection of location and analysis of fishing conditions
The first and most important step is to carefully analyze the terrain, and before unwrapping the gear, you need to assess the nature of the coastline, the depth at the water section and the presence of underwater obstacles. The ideal place is considered to be gentle, clean shore without dense vegetation, which can confuse the area. load-cord If the shore is steep or overgrown with shrub, the risk of hooking increases many times, which can lead to the loss of expensive canvas.
The net must be perpendicular or at an angle to the stream to effectively filter the fish. In strong currents, installation from the shore requires special care, since the sailing gear is large and can simply be carried downstream before it is fully set, in which case it is recommended to use heavier anchors or choose places with slow water flow, for example, at the corners of the channel.
⚠️ Warning: Never install a network in places with heavy shipping or where motorboat routes pass, which can lead not only to damage to gear, but also to dangerous situations for people.
Special attention should be paid to the bottom of the terrain. Rocky bottom or the presence of a logger are the main enemies of the networker working from the shore. Clutching on the snag, you risk losing the net, because pulling it out by hand, without being able to get to the place of the hook on the boat, is almost impossible. slurry or sandy bottom is preferable, although stones can be caught if special uncouples or "free anchor" tactics are used.
Equipment and preparation of gear
To successfully install a network from the shore, a standard kit may not be enough. landing-cordThis cord must be at least one and a half to two times the length of the net itself to have room for maneuver and secure anchorage on shore, and a large buoy or float that will signal the location of the network's start in water is also an element.
Safety and equipment are important, because you're going to have to work by the water, maybe in slippery or wetlands, you have to have high-quality rubber shoes and gloves, and gloves protect your hands from getting cut against thin lines. del And for injuries from abrupt pulling of a wet, heavy net, and it's also worth preparing spare anchors and extra carbines, because losing one element can disrupt all fishing.
☑️ Checking equipment before exit
It is important to check the state of the network before leaving. The absence of holes, the untangled cells and the uniform loading ensure that the network will become a wall. If the network was in use, it must be dried and folded carefully so that when cast from the shore it does not form a beard. For a shore installation, networks are often used shorter than for a boat, since it is physically more difficult to manage a long web from land.
Installation technique: rigging loop method
The most effective way to install a network from the shore is a method using the so-called rigging-loopThe idea is to pre-form a loop from a cord that allows you to control the opening of the network and prevents it from being chaoticly twisted when rolled, and first, the network is neatly assembled into your hands with rings, starting from the cargo cord, leaving it smoothly free.
Then you form a loop from the main traction cord that runs through the net ring or attaches to the first loader, which allows you to stretch the cord in the water, rather than drag it with a lump. When you throw, it's important to synchronize the movement of your hands: with one hand you throw the loader, with the other you feed the net, ensuring that it is evenly distributed in the air before falling into the water.
Sequence of actions during throwing:1. Collect the net with rings in the left hand.
2. Take the cargo cord in the right hand.
3. Make a swing and throw at an angle of 45 degrees.
4. Release the net by controlling the descent of the rings.
Experienced anglers use the "fan" throw technique when the net is laid on the water in a wide strip, which requires good physical shape and training, and if the net is long, it can be set in pieces, fixing intermediate points on the shore or using additional buoys, but this complicates the process and takes longer, the main thing is to keep the nets from getting entangled when getting on the water.
The secret of the long-range cast
To increase the throwing range, you can use a special throwing device or a slingshot to deliver the end of the cord, after which the network is pulled into the water gradually.
Network fixation: anchors and shore anchorages
Once the net is in the water, it needs to be fixed securely, and from shore, it's done with a system of anchors and stretch marks. bottom-anchor The weight of the anchor is selected depending on the strength of the current: standing water is enough 2-3 kg, for the river it may require 5 kg or more.
The shore mount must be arranged so that the net is strained but not pulled to the deli, usually using a stake hammered into the ground or a tree tether, the cord from the net on the shore is fixed by means of a fixed line. quick-releaseIn case of danger (e.g., an approach check or storm) it is possible to immediately release the gear.
| Type of soil | Recommended anchor | Weight (kg) | Features of attachment |
|---|---|---|---|
| Sand | Gravitational | 3-4 | Good hold, easy to get out. |
| il | Flat (shovel) | 4-5 | Slams into the ground, high holding power |
| Stone. | Hook-cat. | 5-6 | Clinging to irregularities, risk of getting stuck |
| grass | Combined | 4-5 | We need extra cargo. |
It is important to consider tidal events or fluctuations in water level if fishing takes place on a reservoir or in a tidal zone. The cord must have a sufficient margin of length so that when the water rises, the network does not tear away from the anchors, and it does not surface prematurely. Using a sliding cargo on the shore cord allows you to compensate for small changes in the water level.
Use bright plastic bottles as additional buoys at the ends of the net, which will help you and others see the location of the tackle in the dark or in choppy conditions.
Network sampling and elimination of hooks
The process of sampling a net from shore is often more difficult than installing it: pulling a wet, fish- and water-laden net down to shore is necessary evenly, without jerking. cargo-cordThe best way to go back is to gradually pick the cord and fold the net into a clean container or onto a prepared film.
If you're hooked, you can't use brute force. You need to carefully pick a slack, get as close to the water as you can (shore permitting) and try to determine the nature of the obstacle. Sometimes it helps to change the angle of thrust: if you go to the left or to the right, you can rip off the snags. In difficult cases, you use a long pole with a hook to uncoup the network remotely.
⚠️ Attention: If the net is stuck and there is a risk of breaking it, it is better to sacrifice a piece of loader or even a piece of cord by cutting them, than to pull to tear the canvas. The whole network is more important than lost cargo.
Once sampled, the net must be immediately cleared of debris, algae and fish. Wet nets deteriorate quickly, so either re-run immediately or dry thoroughly in the shade. Storing a wet net in a bag causes deli to rot, especially if it is made of natural materials or poor-quality fishing line.
Security and legal aspects
Fishing nets are regulated by strict rules that vary by region. Local fishing laws must be reviewed before entering the pond. In many places, installing nets from shore without a license or in prohibited areas (sputter ban, protected areas) entails severe fines and confiscation of gear. License. This is your main document that you should always have with you.
Besides legal issues, personal safety is important. Working with water nets, especially alone, requires increased care. Slippery shore, tangled legs in the cord, a sharp jerk of a large fish can all lead to falling into the water. If the network gets tangled up, it will be extremely difficult to get out of the water due to the weight of wet delhi.
Always tell someone where you are fishing and the approximate time you are returning, and working with nets alone on remote shores carries increased risks.
And also remember to keep the environment safe: Don't leave cord trimmings, plastic bags or broken gear on the shore. Plastic garbage in the water is death for birds and animals. Responsible anglers leave a place in the way they would like to find them.
Can I put a net at night from the shore?
Technically, it is possible, but it is highly discouraged for beginners: at night, it is difficult to control the process of networking, there is a higher risk of becoming confused or losing orientation, and many fishing regulations prohibit night fishing with nets without special permits.
What is the optimal network length for a shore installation?
For installation from the shore without a boat, the optimal length of the network is 15 to 30 meters. Longer canvases (50 meters and above) are extremely difficult to straighten with the right fence from land, they often twist, which reduces their catchability to zero.
What to do if the network is lost?
If the net is carried away by the current and it gets entangled in drifts on the other bank or in the middle of the river, it is useless to try to pull it out by force, either to cross (which is dangerous), or, in the case of a strong hook, leave some of the gear, Prevention is the correct calculation of the angle of setting relative to the current.
Do I need to clean the network before installation?
Modern fishing nets (capron, nylon) don't need lubrication; on the contrary, chemicals can scare fish away. Old linen nets sometimes soaked bark in decoctions for strength and camouflage, but today it's a thing of the past.