Fishing with a swimming net is not just a throwing of gear, but a complex process that requires precision, water knowledge and strict compliance with the law. Unlike shore fishing, working from the boat requires coordination, especially if you are alone. Networking This is a maneuver that determines whether the catch or the tackle will simply get entangled in the knots.
The success of the operation depends on the preparation floater Lake fishing has its own specifications: it's often not flowing, but it has complex bottom relief and vegetation. loaderSo that the gear is vertical and works effectively.
In this article, we will explore the technical aspects of networking, from location selection to safe catching, and learn why it is important to control the speed of the boat and how to avoid hooks on driftwood. Security On the water – priority number one, so ignore the rules of navigation.
Selection of suitable craft and preparation
Before you start fishing, you need to evaluate the capabilities of your boat. Comfortable operation requires a stable platform from which you can freely move and manipulate the tackle. PVC boats They are popular for their lightness, but they are less resistant to snag punctures than metal counterparts. Metal boats, or "Kazanki", provide better stability, but have more weight.
A critical element is the anchor system, and you'll need at least two anchors: one to anchor the boat before work begins, and one to set the net itself. Anchor falla It must be long enough to hold the boat safely even in gusts of wind, and the lack of reliable fixation will cause the network to lie down where it was planned.
⚠️ Warning: Never start working with the net unless the boat is anchored or anchored on a reliable anchor, as even a weak wind can carry the boat to the side, confusing the gear.
And you also need to make sure that you have a place to store your net, and you have to keep the net free, without twisting, and often fishermen use plastic boxes or buckets that they put in their rings, and that prevents them from forming a beard at the most critical time.
Equipment and equipment required
The kit for net fishing from a boat is different from the onshore one, where every element must be on hand to minimize manipulation time. cargo and floatingFor lakes, floating or cargo string nets are often used depending on the target fish.
You need to have some extra equipment, you need buoys to indicate the location of the net on the water, and they're bright, visible from afar, and they allow you to find the tackle even in fog or excitement. jack-horn to raise the net if it is heavy or full of fish.
- 🎣 A network with a properly selected mesh size for the target fish species.
- ⚓ Two anchors with a reserve of rope (at least 20-30 meters each).
- 🔦 Bright buoys or buoys to mark the ends of the network.
- 🔪 A sharp knife on the safety cord in case of emergency cutting of the tackle.
It's important to have it with you. lifejacket. Working with nets often requires tilting overboard, which increases the risk of falling overboard. In cold lake water, this can be fatal. The vest should be worn, not just lying in a backpack.
Selection of the place and analysis of bottom relief
The netting begins long before you touch the tackle, it decides where it is right, and fish are rarely evenly distributed on the lake, concentrated at the edges, at the dumps, in the cane thickets, or at the boundary of clear water and vegetation. echoer It will be your best assistant in finding these areas.
You have to take the wind and the current direction into account. The net is always placed perpendicular or at an angle to the water flow, so that it spreads out and acts as a filter. If you put the network parallel to the current, it will fold up and become inefficient. On lakes, the current is often created by the wind, so watch for its direction.
You pay special attention to the bottom, you can put a net behind a snag, you can lose the gear forever, but experienced anglers know that it is in difficult places that fish are standing. bottom-off Or put nets above obstacles using float rigs.
Technique of proper setting of the network from the board
The installation process requires fine-tuned movements, first anchoring the boat upstream (or wind), putting the net in the bow so that it doesn't get tangled under your feet when you're putting it in, and throwing one end of the net with the buoy or gently lowering it into the water.
Then the boat slowly moves forward, putting the net down, and the speed must be minimal, so that the loader has time to pull the bottom string to the bottom, and the net extends vertically. If you paddle with oars, you need to do this very carefully, so that you do not touch the already lowered part of the gear. transom It greatly simplifies the task, allowing you to keep the perfect speed.
When the net is fully selected from the boat, the second buoy is attached to the end, the boat moves aside, and the net tightens, and it's important to make sure that the net doesn't get on board the boat and get tangled in the engine screw.
☑️ Checklist before downing the network
There's a fan-staging method where the net is arced, and this is effective when fishing on approaches to pits, in which case the boat describes a semicircle, releasing the gear evenly.
| Parameter | Description | Impact on fishing |
|---|---|---|
| Direction | Perpendicular to current/wind | Maximum opening of the canvas |
| Boat speed | Minimum (0.5 - 1 km/h) | Uniform loading of the shippers |
| Depth. | Up to 3-4 meters (for standard networks) | Optimal coverage of the water horizon |
| Time of day | Evening or dawn | Peak fish activity |
Sampling and catching process
The sampling of the net is as important as the installation of the net, and you have to swim slowly to the buoy so you don't scare fish that might have been caught in the next cell, and the boat runs parallel to the net, and you pull it out by hand, by going through the top string.
If you have fish on the net, you can see it right away, you take the big fish off carefully, and you don't want to damage the gill caps or break the net, you can shake the small fish right into the boat, but you can do it over the box or the cloth, so you don't get the bottom dirty and you don't get the gear tangled in the scales.
⚠️ Warning: When sampling a network, always keep one hand free or use a knife on the cord, as a entangled large fish (such as a pike or catfish) can jerk sharply and drag your hand underwater along with the net.
Once the network is sampled, it must be immediately sorted out and dried, and the wet net, folded in a pile, quickly deteriorates, and the nest thread loses strength. Capron networks They dry faster than the deli, but require careful handling when drying in the sun.
Legal aspects and safety on water
Fishing nets in Russia and many other countries are strictly regulated, and the use of net fishing gear is allowed only in certain regions, at certain times and only if available. personalized Fishing during the spawning period is strictly prohibited and carries criminal liability.
Before you go to the pond, be sure to check the fishing rules for your pool, which lists the allowed mesh sizes, net lengths and permitted areas, and violating these rules can lead to the confiscation of the boat and motor, as well as large fines.
Safety on the water also includes the availability of the necessary documents for the boat and motor, if they are subject to registration in the GIMS. The absence of life jackets, navigation lights (when fishing in the dark) is a violation of traffic rules on waterways.
Frequently Asked Questions (FAQ)
Can I put a net on a boat alone?
Technically, it's possible, but it's very inconvenient and dangerous, because one person has to control the boat, monitor the net and control the anchor, and it's recommended that you work together, one person controls the boat, the other person handles the gear.
What is the optimal length of the network for a lake?
For amateur fishing from a boat, nets of 25-30 meters are optimal. Longer nets (50-100 meters) are difficult to set and choose alone, and they require larger water areas, which can be problematic on small lakes.
What to do if the network is caught in a snag?
Try to get closer to the thrust (with caution) and gently release the gear with your hands or bulge. If the net is expensive and the hook is dead, sometimes you have to dive or use a special uncouple, but often the net has to be cut off so as not to lose the boat in high winds.
Do I need to register the network?
The networks themselves are not subject to registration, but must be licensed, but the boat and motor must be registered with the GIMS if their power and weight exceed the established norms (usually engines are more powerful than 8 hp or boats with a carrying capacity of more than 225 kg).