Choosing a reliable fishing boat or outdoor activities is a challenge that requires careful market research. PVC NDND boatsThe bots combine the mobility of inflatable models and the rigidity of the body necessary for comfortable glides, and one of the leaders in this segment is the brand "Kit Bot", whose products have earned many positive reviews from water engines around the country.
The manufacturer’s official website is the main source of reliable information about technical innovations, but often buyers are faced with the need to analyze the specifications before buying. NDMA (low pressure inflatable floor) has become the standard of quality, and how to choose the right configuration that will last for many years without complaints.
Understanding the design and materials is key to successful operation, and we'll look at not only the benefits, but also the nuances of care that will help keep your vessel presentable and running, and if you're faced with a choice between different modifications, this material will be your guide to the world of modern inflatable boats.
Design features of boats with NDNDM
abbreviation NDMA It stands for "Low Pressure inflatable floor," and unlike classical solder floors (plywood or aluminum), it uses a special PVC fabric reinforced with reinforcement threads that becomes rigid like a board when pumped, which allows you to significantly reduce the overall weight of the craft and make it easier to assemble.
The main advantage of this design is that it does not have to dry the floor after each fishing, and the water does not linger between the joints of the floorboard, which prevents rotting and corrosion. Keith bot In its models, the company uses technology where the bottom is integrated into the sides, creating a single sealed structure that is resistant to deformations.
It is important to note that the rigidity of the inflated bottom allows you to confidently go out on the gelling However, to achieve maximum speed and comfort in choppy conditions, the design must be reinforced with a keel or inflatable keel, which is typical for larger models of the lineup.
⚠️ Attention: Despite its high strength, the inflatable floor of the NDNDM is sensitive to punctures with sharp objects (stones, snags) when pulling the boat ashore. Always assess the slope relief!
For quick drying of boats with NDNDD after the season, use a special vacuum cleaner in blow mode, directing the air flow under a slightly raised valve, but do not inflate the bottom to maximum pressure unnecessarily.
Overview of the manufacturer's model range
The company’s range covers a wide range of needs, from compact single “cans” to serious three-seater trophy fishing vessels. technicality and purpose.
The Light series is designed for those who enjoy quiet fishing in calm weather or as auxiliary vessels, with reduced weight and smaller cylinders, and the Pro Pro series is equipped with reinforced seams, additional safety belts and powerful transom inserts.
Special attention should be paid to the models with keel-strengthenedThey're able to steer confidently in the side wind and cut the wave, which is critical for large bodies of water, and the choice of the specific modification depends on whether you plan to walk alone or take a companion and a full set of equipment with you.
Materials and build quality
The basis of the durability of any boat is the material of cylinders. Keith bot It uses high-quality reinforced PVC, which is resistant to ultraviolet radiation, fuel and lubricants and mechanical damage. The density of the fabric varies from 750 to 1100 g / sq.m depending on the model.
Seams are the most vulnerable area of any inflatable structure, and the manufacturer uses a two-part polyurethane adhesive that provides cold gluing, which ensures that the seam does not dry out in the sun and become rigid in the cold, while maintaining elasticity throughout the temperature range.
Furniture also plays an important role: perimeter-painted liktros allows for removable elements such as stringers, rod holders or transom wheels to be installed; transmolant gluing (usually made of water-resistant plywood) is tested by multiple load tests, as confirmed by certificates of conformity.
- 🛡️ PVC reinforced High density provides protection against punctures.
- 🌡️ The thermal resistance of materials allows you to operate the boat from -40 to +50 degrees.
- 🧪 Fire retardant treatment reduces the combustibility of the material.
Comparative table of popular models
To make the choice easier, we have compiled a composite table of three popular models that most customers are interested in, which will help them understand the difference in size and load capacity.
| Model | Length, m | Width, m. | Load capacity, kg | Weight, kg |
|---|---|---|---|---|
| Whale-290 NDDN | 2.90 | 1.36 | 400 | 34 |
| Kit-320 NDDN | 3.20 | 1.45 | 500 | 39 |
| Whale-350 NDDN | 3.50 | 1.55 | 650 | 46 |
| Kit-380 NDDN | 3.80 | 1.65 | 750 | 52 |
As you can see from the table, not only does the load capacity increase as the length increases, but the weight in the assembled form also increases. For models over 3.5 meters, it is already recommended to use transom wheels, as it becomes difficult to carry them in the hands.
Rules of assembly and preparation for descent
The right assembly is the key to safety on the water, and the process starts with the boat being laid out on a flat surface, you have to remove all the sharp objects, the stones and the branches, and the first thing you do is pump the cylinders, not to full pressure, but about 60-70%.
Then there's the queue of the bottom of the NDNDM, which is pumped to the working state, then returned to the sides and brought the pressure to normal, which is necessary for the proper formation of the geometry of the hull, and the pressure is checked by the gauge that is included in the pump.
☑️ Checklist before getting on the water
⚠️ Warning: Never leave a fully pumped boat in direct sunlight unattended. When heated, the air inside expands and the pressure may exceed the permissible limits, causing the seams to rupture.
Operation and care of PVC
The life of the boat depends on how you care for it, and after every step you take to the water, especially in salt water or in muddy waters, you have to rinse it with fresh water, and that will wash away the salt, sand and organics that can break the structure of the material.
Keep the boat in a dry, ventilated room, and if you leave it in an unheated garage for the winter, make sure it's completely dry, and wet tissue can get microcracks at the folds when ice crystals freeze.
Check your condition regularly coatboardIf plywood has begun to darken or to delaminate, it must be coated with moisture-resistant varnish or replaced, and the passage of water through a transom is a common cause of flooding the boat with the engine compartment.
How to seal a puncture in the field?
If you puncture on a fishing trip, degrease the area around the damage (you can use an alcohol napkin), apply glue and press the patch from the remix. For express repairs, you can use special sealing tapes, but it is better to conduct a full glue at home.
Where to buy and how to distinguish the original
Buying boats is best from official dealers or on the website It guarantees a product with a factory warranty and a full set of documents, and there are many counterfeit products on the market that copy design but use cheap materials.
The original boat, the Kit Bot, always has a serial number, a product passport and instructions in Russian. Pay attention to the quality of logo printing and the accuracy of the seams - fakes often have glue leaks and uneven slices of fabric.
When ordering online, carefully study the package. The basic version can only include a boat and a bag, and oars, pump and seats are sold separately.
- 🏷️ The presence of a hologram of the manufacturer on a bag or balloon.
- 📄 Passport with the seal of the plant and the date of release.
- 🤝 Possibility of service at the dealer.
Buying from a dealer protects your consumer rights and gives you confidence that in the event of marriage, you will be replaced by the product, rather than offered a paid repair.
Frequently Asked Questions (FAQ)
Can I leave a boat with NDND in the sun?
Long exposure to the scorching sun is not desirable for any PVC. The material can overheat, which will lead to stretching and loss of shape. If this is not possible, try to at least partially shade the cylinders or relieve excess pressure.
What pressure should be in the cylinders?
The optimum working pressure is usually 0.2 atm (or pressure gauge readings specified in the instructions, often about 200-250 mbar). Pumping is dangerous to rupture seams, under-pumping reduces driving performance and increases the risk of damage to the bottom.
Do I need to lubricate the seams with special means?
Modern adhesives and materials do not require regular lubrication. Clean enough. Using aggressive chemicals or oils can dissolve the adhesive layer, so avoid contact with gasoline and solvents.
How long has the PVC boat been in service?
With careful operation and proper storage, the service life of a quality boat Keith bot The resource depends on the frequency of use, storage conditions and accuracy of the owner.