Reliable spinning mount in the boat: guide to selection and installation

Fishing with a swimming tool is radically different from coastal fishing, requiring the angler not only skill of throwing, but also competent organization of space. spinning-pinning In a boat, because the erratic gear puts the fishing line at risk, the form is damaged, and even the expensive lures are lost overboard. With limited cockpit space and constant rolling on the wave, fixing the rods becomes a matter of not just comfort, but the safety of the entire crew and the safety of property.

There are many ways to organize the storage of gear during the transition or the catch, but not all of them are equally effective. PVC It's an inflatable structure or a rigid metal body, and it's also a combination of gear that you use at the same time, and a properly designed fixation system will allow you to react instantly to a bite without wasting time releasing tangled cords or fearing that the spinning will fly overboard when you roll.

Basic requirements for fixing rods on water

The first and most important requirement is the reliability of the mount, even in the case of heavy chop. The spinning should not just "stand" in the stand; it should be fixed so that the inertia when braking the boat or the shock of the wave does not knock it out of the nest. Security Here stands in the first place: the falling rod can fall under the screw of the working engine, which will lead to expensive repairs or complete loss of gear.

The second aspect is the material that the holders are made of, and given the aggressive environment (water, sun, fish slime), the design must be made of stainless steelquality aluminum or impact-resistant plastic UV protectionCheap metals quickly corrode, leaving rusty streams on the sides of the boat, and poor-quality plastic in the cold becomes fragile and breaks at the first serious jerk of the trophy pike.

The third criterion is ergonomics and accessibility, and the mounting should be positioned so that the angler can take the spinning with one hand without getting up or changing the position of the hull. The ideal location is in the reach of the outstretched arm, but outside the zone of active work with paddles or lifts. It is also important to take into account the angle of inclination: for active fishing in the wiring, the vertical position is more convenient, and for storing spare gear - horizontal.

• 🎣 Strength: Ability to withstand the jerks of large fish and loads during transportation.
• 🌊 Wet resistance: resistance of materials to salt and fresh water, lack of corrosion.
• ⚓ Stability: rigid fixation of the base, excluding backlash and vibration during the boat.

Ignoring these requirements can lead to curious but unpleasant situations, for example, a poorly fixed in soft plastic spinning at a sharp start of the engine can simply jump out and fall to the bottom of the boat, damaging hard objects, so you need to approach the type of fixation responsibly, given the specifics of your fishing.

Types of fasteners: from simple to professional

The fishing accessories market offers a wide range of solutions, from primitive homemade structures to high-tech systems. pocket-holderThese are fabric or plastic tubes that hold a rod coil, which are cheap and easy to do, but the reliability of this fixation leaves much to be desired, because when you shake it hard, the spinning can pop out.

A more advanced option is metal-glass rod holders that are attached to the transom or sides, and they can be fixed or rotary. downrigger Or just rotary, allowing you to change the angle of the rod, which is very convenient when you catch trolling or on the track, and these structures are usually made of stainless steel and last for years without losing their properties.

⚠️ Attention! When installing metal glasses on PVC inflatable boats, make sure that all sharp edges and welds are carefully ground or covered with plugs. Any sharp ledge is a potential hole in the cylinder that can become fatal far from shore.

For lovers of minimalism there are magnetizerThey attach themselves to the metal elements of the boat or special areas and hold the form with powerful neodymium magnets. This is convenient for rapid change of gear, but requires caution: the magnetic field can affect some electronic devices, and there is a risk that a very powerful jerk of the fish will still pluck the rod from the magnetic grip.

Features of installation on PVC boats

Installing mounts on inflatable boats requires a special approach, since drilling cylinders is strictly forbidden. leerageFor gluing, special polyurethane-based two-component adhesives are used for the purpose of PVC The surface of the cylinder and the base of the holder shall be degreased and cleaned for maximum adhesion.

Fishers often use the door-wheel Or extra slats that are attached to the transom, and they're already mounting spinning glasses, so you can keep the sides of the boat out of the way and keep the seals tight, but you have to remember that the transom is a zone of high vibration, so the mounts should be tightened as tightly as possible, preferably with the use of growers or carving fixers.

Another popular method is the use of float-platform Or rigid liners that are fixed inside the boat and have built-in sockets, often bundled with expensive boat models or bought separately as an option, convenient because they don't require glue and can be moved anywhere in the cockpit.

It is also important to consider the temperature regime of the adhesive operation. If you plan to fish in the cold season, make sure that the adhesive composition chosen retains elasticity at low temperatures and does not “blown”, otherwise the holder may unstuck at the most inopportune moment.

Fastenings for metal and plastic boats

Owners metallic And the plastic boats are in a better position to use mechanical fasteners, and drilling holes and putting glasses on bolts or screws is the most reliable way to fix them. sealing the entry points of the fasteners.

For metal housings, holders from stainless steelWhen drilling aluminum, you need to use metal drills with appropriate sharpening, and the holes must be treated with anti-corrosion compounds. A washer and a rubber gasket are necessarily installed under the head of the bolt or screw to prevent electrochemical corrosion.

Type of boat	Recommended type of fastener	Holder material	Risks.
PVC (Inflatable)	Sticking, leer system	Plastic, aluminum	Unplugged, puncture of the balloon
aluminum	Bolt connection, welding.	Stainless steel	Corrosion, leak.
Plastic (FRP)	Scoops with a wide hat, glue	Plastic, Stainless steel	Cracks in the hull, leak
Wooden	Tanks, clamps	Wood, Metal.	Rotting, loosening
Inflatable hard bottom	Combined (to slant)	Plastic.	Damage to the slates

When installing on plastic (glass fiber), it is important not to pull the fastener over, so as not to cause the material to crack around the hole. silicone sealants Or polyurethane compounds to protect against water entering the enclosure, and improper sealing can lead to water being drawn into the voids of the enclosure, which can have a negative impact on buoyancy and handling.

How to check the quality of sealing?

After installing the sealant and drying, pour the installation site with water from the hose or bottle on the inside (if available) or from the outside, and from the inside, apply a dry wipe. If after a few hours the wipe is dry - sealing is done efficiently. Repeat the procedure after the first serious wave.

Organization of space in trolling

Trolling involves the use of multiple spinnings at the same time, which requires special organization of space. Here, ordinary glasses may be ineffective, as the fishing line of neighboring rods can overlap. outrigger And the sleeves that are in the right place and in the right place.

The key is that you can remove the rod quickly, and the holders have to allow you to remove the spinning in one motion, but still securely fix it when the boat is moving. quick-moving elements where the glass itself is rigidly fixed on the boat, and a replaceable liner with a rod is inserted into it.

When trolling, it is also important to consider the length of the overhang of the rods overboard. Too long an overhang can cause the spinning to touch the obstacle and break when turning the boat or approaching the shore. The optimal length is regulated by the depth of the lump into the glass.

• 🚤 Arrangement: The rods should look in different directions to minimize overlap.
• 🎣 Corner: For deep-sea trolling, the angle is larger, for surface trolling it is smaller.
• 🔒 Fixing: mandatory use of safety belts or carbines.

⚠️ Attention! When trolling, never leave rods unattended, even if they are securely secured. A sharp bite of a large fish or a hook on a snag can flip a light boat or snatch a tackle from a poor-quality holder.

Safety and maintenance of equipment

Regular maintenance of the fasteners prolongs their life and ensures safety. After every fishing, especially in salt water, the metal elements must be washed with fresh water. stainless steel It can be affected if you are in an aggressive environment for a long time without care.

Check the condition of the fasteners before each step into the water. Bolts have the ability to unwind from vibration, and plastic elements have the ability to crack from ultraviolet light and impacts. Prevention It takes a few minutes, but it can save your fishing and nerves.

You should also pay attention to the condition of the rods themselves in the places of contact with the holders. If you notice that the blank is erased against the edge of the glass, immediately take action: wrap the edge with tape, use Cambrians or replace the holder with a more gentle model. Damage to the form at the loading site can lead to its breakage when catching the trophy.

FAQ: Frequently asked questions

Can I use homemade PVC pipe holders?

Yes, it's a popular and budget option, but it's important to use pipes of the right diameter so that the rod doesn't hang around, and to carefully treat the cuts, removing all sharp edges.

How to fix the spinning, if there are no special holders?

In emergency cases, you can use a tight rubber band (shock absorber) to attach the rod to a leer or a handle, you can also swing the comet into the corner of the cockpit, and the form is fixed between the sides, but this is less reliable and safe only in the parking lot.

Are magnetic holders harmful to the coils?

Modern coils and rods are generally not afraid of magnetic fields from household neodymium magnets, but it is not recommended to attach magnets in close proximity to electronic navigators, sonars or compasses, as they can distort readings.

What is the best angle of tilt for fishing in the wiring?

For active fishing in the wiring (jig, twigging), the most convenient vertical position or angle is about 70-80 degrees. This allows you to quickly cut and not touch adjacent gear. Horizontal position (0-20 degrees) is only suitable for storage or trolling.