Spindly fishing from a boat is very different from the usual spinning or bottom fishing, because here the angler does not throw the bait at a distance, but works strictly under the boat. This method is especially effective in the autumn, when the predator rolls into deep wintering pits, and traditional wiring into the cast ceases to give effect. hydrodynamics And the ability to position yourself properly with respect to current and wind becomes key success factors.
The essence of the method is to vertically lower the bait to the point where the sonar shows the accumulation of fish or relief anomalies of the bottom. The angler is in close proximity to the object of fishing, which allows you to use more delicate gear and feel the slightest change in the behavior of the predator. sonarFish often stand in dense flocks and react quickly to movements.
The main advantage of plumb fishing is that you can catch hard-to-reach places where you can't throw from the shore because of dense vegetation or complex terrain, and you're not tied to one point, but you can methodically comb through the water area, stopping only where the instrument shows the presence of life. mobility and the presence of a reliable anchor or cat anchor It becomes more important than the range of the bait.
Choice of craft and anchorage
For efficient plumb fishing, the boat must have good stability to minimize the rocking that interferes with the control of the lure. PVC It's important that the design allows the angler to be comfortable on the side or in the bow, without interfering with the boat's handling.
⚠️ Warning: When fishing in a plumb course never stand in full growth on board the boat without insurance - a sharp jerk of a large fish or a hook can lead to a fall overboard or a boat flip.
The anchor system is the foundation of all fishing. Using one anchor often causes the boat to turn across the current or the wind, creating sailing and noise that scares the fish away. stretch-stretches It's anchored on two anchors (nose and stern), which allows you to rigidly fix the position of the boat. anchor-false with a quick-removal mechanism.
It is important to consider the depth at the fishing site: in shallow water, the length of the anchor cable must be 3-4 times greater than the depth in order to keep the tension angle sharp and the anchor secure. At great depths, where pike fishing often occurs, heavy anchors weighing from 3 to 5 kg are used. anchorage eliminates drift and allows the bait to play strictly vertically.
Equipment: fishing rods, coils and sonar
The gear for sheer fishing should be compact but powerful, since the shedding often occurs by "swinging" the rod without friction work. The rod is chosen short, from 1.5 to 2.1 meters in length, with a test corresponding to the weight of the bleach used and the depth of the fishing. fast or extra-fastto clearly transmit the bite and make sharp cut at great depth.
The coil must have good traction power and contain a sufficient supply of wicker cord. The monophilic line is practically not used here because of its extensibility, which at depths of more than 5-7 meters makes the bite invisible. thread-cord diameter 0.12-0.16 mm, which does not stretch and has high sensitivity.
The sonar is the fisherman's eye when fishing in plumb, without modern sonar with function. DownVision Or 3D scanning of fishing turns into divination, and the device must show not only the topography of the bottom, but also clearly separate the fish from the bottom structures, and many models allow you to see the predator's response to the bait in real time, which allows you to instantly change the game.
Use side view (Side Imaging) on the sonar to look for brows and dumps before you stand at anchor - this will save time and fuel.
And you should pay special attention to the nod, and although many people use hard anglers without a nod, the presence of a sensitive nod is very important. nod It's made from a lausan or a metal plate that helps you see a careful bite when the fish is just trying the bait, and it also helps to give the bait extra play, making the wiring more alive.
Search tactics and wiring technique
The fish search begins with a study of the bottom relief. The predator, especially the perch and perch, is tied to anomalies: eyebrows, piles, snags and exits from the pits. Moving against the current or in the wind, you need to carefully monitor the sonar screen. Once the fish arch or a sharp drop in depth appears on the display, you should stand at anchor higher upstream, so that when drifting (if fishing is swimming) or when anchoring, you are above the point.
The wiring technique for plumbing is varied and depends on the predator's activity. The basic wiring is this: the bait is lowered to the bottom, 2 to 3 sharp strokes are made with the angler, followed by a pause. During the pause, the bulk of the bites occur. The amplitude and frequency of the strokes can vary from small tremors to wide sweeping movements.
☑️ Fish search algorithm
If the fish is active, it's aggressive, high-amplitude, passive, dribbling, which is a small tremor with the hand without the bait coming off the bottom, and it's important to constantly experiment with changing the wiring horizon, the rate of fall, and the nature of the game, and sometimes it's when the bait is pulled off the bottom or when it's flowing down smoothly.
⚠️ Warning: When fishing on a strong current, the pause should be made longer, since the flow of water creates additional resistance to the bait, and it plans longer.
Lures: Sprays, balancers and rattlelins
The range of lures for sheer fishing is extensive, but the leading positions are vertical lures. They have a shifted center of gravity, which causes them to deviate from the vertical when you wave and come back when you pause. Classic "carnations", "tri-faces" and "diamonds" work perfectly on the perch. For perch, they use lighter and more planned splendors with plumage or chain.
Balancers are another effective type of bait, they mimic an injured fish and they swing away to describe an eight. For deep-sea fishing, they choose models of increased size and weight so that they don't fall through the current. It's important to properly size the hooks and sometimes put them on them. Cambrian Or pieces of edible rubber to attract attention.
Rattlins have become incredibly popular in recent years, and they're bladeless top-mounted wobbles that, when wiring, make noise and vibration that attract predators from a distance, and they're like a wounded fish trying to get away, and Rattlins are particularly effective at catching passive pike and pike.
The secret of tooling
To enhance the attractiveness of the bait, many anglers use glowing beads or Cambrians, which accumulate light from the lantern and glow in the dark, attracting a predator from the depths.
The choice of bait color depends on the transparency of the water and light. In clear weather and shallow water, natural fish colors work. In deep water, where there is a dim light, or in murky water, bright, acidic colors and lures from the water are more effective. phosphorous The presence of noise chambers inside the bait can also play a crucial role.
Seasonal features and types of fish
Fallfishing is most effective in the fall, with the water cooling, and during this time the predator flocks and goes to the deepest parts of rivers and lakes. However, successful fishing is possible in the summer, especially in the heat, when the fish hide in deep pits and swamps to escape overheating, and in winter this method is transformed into fishing from the ice, but the principles remain similar.
Sudak is the main trophy of sheer fishing. It holds at the bottom, prefers hard areas and bores. The pecking of the pike often feels like a sharp poke or a heavy pull. Pike also comes across, but it can attack the bait in any horizon, so it is recommended to use pike when fishing for pike. metal-leash.
Perch, especially the large humpback, often stands in half or above the eyebrows. The perch pack can be very active, and with the right choice of bait, you can quickly gain a solid catch. Bersh, a close relative of the pike, also comes across the bottom layers, but it bites more carefully and requires delicate play.
| fish-fish | catching horizon | Typical bait | Nature of the bite |
|---|---|---|---|
| Sudak | At the bottom, dumps. | Vertical glitter, rattlin | A sharp blow, a heavy one. |
| Perch | Middle, upper | Balancer, light glitter. | A series of sticks, hanging. |
| Pike. | Any horizon | Big balancer, glitter. | Powerful punch, snatch. |
| Bersh | Bottom layer | A fine splash with a Cambrick | Careful touching |
The success of plumb fishing depends on the correct search for deep anomalies using the sonar, not on the color of the bait.
Frequent errors and safety practices
One of the biggest mistakes of beginners is to ignore sonar and catch "at random." Without understanding the terrain and the presence of fish, the effort will be in vain. Also, often anglers use too rough tackles that do not convey the play of easy bait, or, conversely, too delicate, which break when catching large fish from the depths.
Boat noise is another enemy. Loud talk, bumps on board, falling objects — all of these are alarming to fish, especially at shallow depths. The engine should be jammed before reaching the point, and swim silently using oars or electric motors. Silence greatly increases the number of bites.
⚠️ Warning: When fishing in a snag, always keep a wrench on hand. Attempting to pull out a stuck bait by force often leads to the breakdown of expensive gear or loss of catch.
Water safety is priority number one. Fall-fishing often takes place at great depths and far from shore. Life jackets, a serviceable engine and communications are mandatory. Weather conditions can change quickly, and a light storm can be fatal for an unstable boat.
Questions and Answers (FAQ)
Do you need a nod to catch a pike in the plumb?
The use of a nod is not mandatory, but desirable, especially for beginners. The nod helps to see the most cautious bite when the pike only tries the bait, not grabbing it. It also helps to set the right amplitude of the game to the bait. Experienced anglers often catch without a nod, feeling the bite through the rod whip and fingers.
Which echoer is better to choose for steep fishing?
High-frequency, high-definition echo sounder is required for high-quality plumbing. Well-established models with DownVision or 3D scanning technology that allow you to see the fish and the structure of the bottom under the boat in detail. Conventional single-beam sonars may not show the fish standing under the boat itself.
Why does the fish not bite, although the sounder shows its presence?
There are several reasons: the wrong game of bait (too sharp or monotonous), the wrong horizon of wiring (fish is higher or lower), or the fish is passive due to pressure or weather. Try changing the bait, reducing the size, changing the color or switch to more delicate wiring with long pauses.
Can I catch a boat from a boat?
Yes, PVC inflatable boats are great for steep fishing because of their stability and ability to extinguish waves, the main thing is to anchor properly so that the boat does not spin in the wind or current, and be careful with sharp hooks and fish teeth so that the cylinders do not damage.