Fishing from the boat opens up opportunities for the fisherman, inaccessible to the coastline, allowing you to get to deep pits, sharp brows and scorched swirls, where the trophy fish hides.

Exactly. fishing-rod It is considered one of the most effective methods of hunting bream, roach and gustera in conditions of strong current and significant depths.

Unlike the classic bottom angling, here the key role is played not by long casting, but by the precise positioning of the boat and vertical bait supply, which requires specific skills from the angler and a special approach to the equipment.

Selection and preparation of watercraft for fishing in plumb

The success of the event directly depends on how stable your platform is, because you have to catch with two hands, holding fishing rods, and any strong pitching can turn the process into torture.

This fishing is perfect for this. PVC with an inflatable floor of the NDND or a hard floorboard, as they provide the necessary stability and extinguish the wave better than light inflaters.

Metal boats are also applicable, but require additional depreciation so that noise from the waves hitting the side does not scare off careful fish in shallow water.

It is important to bear in mind that anchorage must be reliable, since the boat must be rigidly fixed across the current, otherwise the gear will become entangled, and the bait wash away to the side.

⚠️ Warning: Never tie the boat to one side only in a strong current - this creates a risk of tipping over with a sharp jerk or gust of wind.

The comfort of the fisherman increases the presence of a comfortable seat on a rotating chair or special cans that allow you to change the angle of view and fishing directions without unnecessary movements.

Design of the onboard fishing rod and requirements for gear

The onboard fishing rod is radically different from the fly or spinning, since it is designed exclusively for vertical wiring and angling in the limited space of the boat.

The optimal length of the whip is from 1.5 to 2 meters, which allows you to comfortably work with two fishing rods at the same time, without overlapping them with each other.

The material is most often fiberglass or composite, as they have sufficient flexibility to cushion the jerks of large fish and are not afraid of moisture.

  • 🎣 nod The main alarm system must be made of a clock spring or lausan and have a length of 15-20 cm for noticeable play.
  • 🎣 Coil - simple inertia or miniature deinertia with friction, containing 30-40 meters of fishing line with a diameter of 0.2-0.25 mm.
  • 🎣 Storage - fishing rods are often equipped with rods, which are attached directly to the boat.

Some anglers prefer to use short spinning rods with a test of up to 20 grams, equipping them with special nods, which makes the tackle more versatile.

The main requirement for assembly is the reliability of the nodes and the absence of unnecessary elements that can catch on gear or clothing in a tight space.

Equipment: loaders, hooks and forest installations

Properly assembled tooling is 80% of the success, especially when it comes to capricious fish on the current, which requires delicate feeding.

The main element here is a sliding loader, the weight of which is selected under the force of the current, so that the fishing line always remains vertical.

For fishing at depths from 4 to 8 meters, the installation of a "ring" or its simplified variations are often used, where the feeder and hooks are in the same feeding plume.

Type of installation Weight loader Length of leash Application
Deaf tooling 20-40 10-15 cm Weak current, active fish
sliding loader 40-80 20-40 cm Medium and strong current
Paternoster 30-60 g 15-30cm Bottom and pond fishing
topping up 50-100 g 10-20 cm Jaur bream, two hooks at once.

Hooks are selected based on the size of the intended prey and the type of nozzle, usually numbers from 10 to 14 according to the international classification.

The use of fluorocarbon leashes up to 1 meter in length is justified only when catching extremely careful fish in clear water, in other cases, a high-quality monophile is enough.

The secret of stealth

Use dark-colored fishing lines (black, brown, dark green), as they are less visible to fish against the bottom and in the shadow of the boat than transparent or blue ones that shine in the sun.

Tactics of searching for promising places and anchoring

The search for a place begins long before you lower the anchor and requires preliminary examination of the bottom relief using a sonar or depth measurement.

The most catchy are the sharp changes in depths, eyebrows, exits from pits and the boundaries of the main stream with quiet water zones, where the fish is ambushed.

The process of anchoring should occur strictly according to the algorithm: first, the boat is put with its nose against the current, then the bow anchor is lowered, and the boat is carried back to tension, after which the stern is fixed.

It is important to position the boat so that feed-stitch It was pulled right under the side, not carried away to the side, otherwise the fish will stand away from your hooks.

⚠️ Warning: When fishing on a strong current, avoid putting the boat on the stretch (two anchors on the sides), as this creates a dangerous situation with a sharp change in water level or wind direction.

If you are fishing on the river with shipping, be sure that the chosen place is not in the fairway and you will not interfere with the movement of other boats.

📊 What type of bottom do you prefer for catching bream?
The stainless stain: the stained stain: the stained pit: the stained pit

Brushing and selection of bait for onboard fishing

The basis of success is the creation of a dense forage table that will keep a flock of fish under the boat for several hours.

For onboard fishing, heavy feeders-nets with a large cell are ideal, which fill mixtures of wheat, barley, cake and a living component.

A living component, such as a worm, chopped worm, or moth, is a must, as it is the movement and smell that attract the fish from a long distance.

  • 🪱 Oparysh A universal nozzle that works throughout white fish, especially in a sandwich with a worm.
  • 🪱 worm The best choice for night fishing and hunting for large bream or mould.
  • 🪱 Perlivka - works perfectly on roache and slacker during periods when the fish ignores animal nozzles.

The consistency of bait should be such that it washed out gradually, forming a muddy column, but did not fall asleep instantly when immersed.

Flavors should be used carefully, adding them in small doses, so as not to interrupt the natural smell of the feed base, which is used to fish in the reservoir.

💡

Add to the feeder a little soil from the shore or clay - this will weight the mixture and slow down the washing of food on a strong current, prolonging the effect of feeding.

Fishing technique and nod work

The angling technique on the side fishing rod combines elements of bottom and mormuscular fishing, requiring constant control of the tackle.

The angler holds the fishing rod in his hand or sets it on board, periodically making smooth nods to give the nozzle additional appeal.

The game should be amplitude, but not sharp, with pauses at the bottom point, as it is at the stop that a confident bite often occurs.

The cut is made by a short and sharp carpal movement up, immediately after the nod straightens or goes down.

Catching large fish requires work rod without forcing, so as not to break a thin leash on a shell or driftwood.

💡

The secret to success is constant visual control of the nod and instant reaction to the slightest change in its rhythm or position.

Safety and equipment of fishermen

Boat Fishing, especially in the current and depth, is associated with certain risks, neglect of which can cost health or even life.

Having a life jacket is a must, even if you are confidently holding on to the water, as an unexpected impact or hook can lead to a fall overboard.

Clothing should be weather-friendly, but necessarily waterproof and free, so as not to constrain movements when working with gear and anchor.

⚠️ Warning: Always carry a sharp knife on your belt, fixed on insurance, so that in case of tangled fishing line around the leg or tackle, you can instantly free yourself.

Do not forget to check the condition of the boat before getting on the water, the presence of a first aid kit, an anchor line of sufficient length and means of communication.

☑️ Checking before getting on the water

Done: 0 / 1

Frequently Asked Questions (FAQ)

What length of the rod is considered optimal for a beginner?

For a novice angler, a rod of 1.5-1.7 meters is best suited, which makes it easy to control the tackle in a cramped boat, avoid confusing neighboring fishing rods and confidently control the nod. Longer whips (2 meters or more) require more experience for effective work.

Can I catch on the side fishing rods from an inflatable boat without a motor?

Yes, it is possible, and often more effective, because the lack of motor reduces noise, the main thing is to anchor properly using two anchors (nose and stern) or a stretch system, so that the boat does not turn on the side to the current, which would make fishing impossible.

Why does the peck stop when the boat anchors?

Anchor noise, water impacts and body vibrations can temporarily scare the fish away, usually restarting the peck in 15 to 30 minutes when the fish calms down and comes to the smell of bait, at which point it is important to keep quiet and not make sudden movements.

Do I need to use a sonar for onboard fishing?

The sounder is highly desirable, especially in unfamiliar water bodies, and helps you find the exact location of the fish, determine the depth, structure of the bottom and the presence of brows, which allows you to anchor as efficiently as possible, right above the stern table.