The decision to purchase an inflatable watercraft often becomes a turning point for the lover of water recreation. Buy a PVC Rocket boat It means choosing the products of one of the oldest factories in the post-Soviet space, whose history goes back decades. In 2026, the brand's range has undergone significant changes, adapting to the modern requirements of fishermen and tourists, but retaining its recognizable reliability.
Choosing a particular model can be confusing even an experienced boater because of the variety of modifications. In this article, we will discuss in detail why you should pay attention to this particular brand, what technical nuances are hidden behind a beautiful name and how not to make a mistake when buying. Quality assembly And the affordable price makes these boats hits, but the devil, as usual, lies in the details.
Why you should choose a boat brand Rocket in 2026
The Rocket brand is associated by many with time-tested classics available to the masses. reinforced PVC In the face of fierce competition in 2026, the manufacturer has made a bet on strengthening the design, which is especially important for those who plan to get on the water with powerful engines.
One of the key advantages is the use of smear technology with double-smearingThis is a very tight, even under extreme loads, and unlike many of our competitors who have switched to welding, we keep our proven gluing methods, adding reinforcing tapes at critical joints, and it makes the boat maintainable in the field using standard remixes.
⚠️ Warning! When buying, be sure to check the certificates of conformity for the PVC material used, as there are counterfeits using less durable fabrics on the market.
And the ergonomics of the models are also worth noting, and engineers have taken into account the complaints of the past and redesigned the layout. cross-plate And now the load is distributed more evenly, making it easier to launch and transport in the trunk of a car, and for many buyers, it's the combination of price and functionality that becomes the deciding factor.
Overview of popular series: from the Frigate to Siberia
The product line of the plant is extensive and is divided into several target groups. The Frigate series It's designed for fishing enthusiasts who need a manoeuvrable, light boat, and these models are often equipped with an inflatable keel, which provides excellent wave handling at a minimum weight. Comfort seriesIt has a larger cockpit width and soft seats.
Special attention deserves "Siberian" seriesIt's a more dense material and reinforced cylinders that can withstand contact with ice and sharp rocks, and if you plan to use a boat not only in summer but also in the off-season, it's the best choice.
You can compare the main features of the popular series in the table below. Pay attention to the load capacity, as it directly affects the number of passengers and equipment that can be taken on board.
| Series | Type of bottom | Max engine power (hp) | Load capacity (kg) |
|---|---|---|---|
| frigate | Inflatable/Plywood | 5 - 15 | 350 - 600 |
| Comfort. | Pyol (plywood) | 10 - 25 | 500 - 800 |
| Siberian | NDNDM/Aluminum | 15 - 40 | 700 - 1000 |
| timen | Pyol (plywood) | 5 - 18 | 400 - 650 |
Technical features: material and construction
The basis of durability of any inflatable boat is the material. The Rocket plant uses a five-layered silk. reinforced PVCThe density of the fabric varies from 750 to 1100 g/sq. m depending on the model. For severe use, it is recommended to choose options with maximum density, as they are better in shape during pumping and less susceptible to temperature strains.
The design of the seams is also critical, and it uses a two-component polyurethane adhesive that polymerizes, making the compound stronger than the material itself. transom plate In most models, it's made of moisture-resistant plywood, and it's protected by a stainless profile, and it allows you to install motors up to 40 hp without the risk of damage to the transom.
An important element of safety is split-bagEven if one of the compartments is damaged, the boat will remain afloat, giving time to get to shore or fix the malfunction, and having additional air chambers in the bow ensures unsinkability and protects passengers from splashes.
How to choose the right size and completeness
Boat size is a trade-off between capacity and transportability. If you plan to fish alone and change water bodies often, models up to 3 meters long will be perfect. They are easily assembled by one person and fit in a bag that can be carried to the water. buy 3.5 meters long.
When choosing a complete set, pay attention to the availability timberIt's a rubber perimeter edging that protects the boat from impacts on the dock, rocks and other boats, and the absence of this element significantly reduces the life of the craft, and it's also important to have comfortable handles for carrying and quality valves for quick air venting.
- 🎣 For fishing with a sonar and a chair, choose models with a flat bottom and the possibility of installation transom-wheel.
- ⚓ For walks with children boats with high sides and soft inflatable floor for safety.
- 🚤 For high-speed walks, models with an inflatable keel or NDND and a hard transom are needed.
⚠️ Attention! Do not overload the boat beyond the passport limit. Excessive load capacity reduces the height of the board above the water and reduces handling, which is dangerous on the wave.
Care and storage: extending the life of PVC
To make your purchase a pleasure for many years, you must follow the rules of operation. After each release, especially on salt water, the boat must be washed with fresh water. PVCUse a soft sponge and special means to clean inflatable boats, avoiding aggressive chemistry.
Keep the boat in a cool, dry place, away from heaters and direct sunlight. Before packing, make sure the product is completely dry, otherwise mold and fungus may appear inside, which destroy the structure of the material. It is recommended to periodically, once a season, pump the boat and check the pressure to identify possible microgusts.
It is better to use a spacious case for storage, so that the material is not in a compressed state. Bendings and crevices, if they fall in the same place, can lead to cracks over time. cross-plate plywood, especially if the boat was often used in water.
Where to buy and what to pay attention to
The best way to buy products from the Raketa plant is from official dealers or specialized boating stores, which ensures that you get the original product with a factory warranty. There are many offers on the market "hands" or from dealers, where the risk of buying a defective or lying product is much higher. When buying in a store, be sure to ask for a check and a filled out warranty card.
Look at the boat visually: seams should be smooth, without glue bubbles and sticking out threads. Valves should close tightly and keep the pressure. Completement The presence of oars, pump, remix and bag must be consistent with the stated, the absence of any element must be immediately agreed with the seller.
Pricing is based on the exchange rate and the cost of raw materials, so prices can fluctuate. However, the Rocket has traditionally remained in the affordable boat segment, offering the best value for money. Investment in quality watercraft is an investment in your safety and comfort on the water.
Frequently Asked Questions (FAQ)
Can I install an electric motor on a Rocket boat?
Yes, most models have a transcrete for attachment motors, including electric motors, as long as the weight of the motor does not exceed the permissible load on the transom specified in the data sheet of a particular model.
How long does the boat dry before packing?
Drying time depends on the humidity and temperature of the air. In warm dry weather, 2-3 hours are enough; in wet or cold weather, the process can take up to a day. It is important that there is no moisture left inside, otherwise the material will deteriorate when stored.
Which glue is best for repairing PVC Rocket?
For repair, it is best to use a two-component polyurethane adhesive specifically designed for PVC (e.g. Texacol or its analogues), chlorprene-based adhesives (contact) are less stable and less resistant to temperature and moisture changes.
Do I need to register the Rocket boat in the GIMS?
Registration is required if the weight of the curbed vessel (boat + engine + equipment) exceeds 200 kg OR the installed engine exceeds 8 kW (about 10.88 hp). If your boat is lighter or the engine is weaker, registration is not required, but you need to have documents for the boat and the engine with you.