Finding a reliable and spacious boat for serious fishing or long walks in reservoirs often leads to the need to choose a model with a high-pressure inflatable floor. Aqua 3400 NDLDIt combines compactness in transportation and performance close to full-boats, and unlike the classic plywood models, it uses Air Deck technology, which dramatically changes the weight and ease of assembly.

This model is designed for those who value time and comfort. High pressure inflatable floor It allows you to forget about the heavy slan that you have to carry, stow and dry after each trip, and in this article we will discuss in detail the technical parameters, design features and nuances of the operation of this boat, so you can make an informed decision.

It is important to understand that the dimensions of 3.4 meters are not just an inflatable boat for swimming, but a full-fledged tool for ponds with any wind situation. The working length of the cockpit is 2.8 metersIt's designed to accommodate two or three full-equipment adult passengers comfortably, making it versatile for different use cases.

Design features and materials

The basis of the durability of any PVC boat is the material from which it is made. Aqua 3400 It uses a five-layer reinforced material that is resistant to gasoline, oils and ultraviolet radiation, and has a tissue density of 850 g/sq.m., which provides excellent protection against puncture and abrasion against rocky bottoms.

Engineers paid special attention to the tightness of the seams. The connection of cylinders and the bottom is made by hot vulcanization, which excludes stratification even under extreme loads. Seam tightness A critical parameter that affects water safety, and here the manufacturer applies proven technologies.

📊 What type of bottom is more important to you?
Hard slate (plywood)
NDND (inflatable)
Combined
Doesn't matter.

The design includes a reinforced keel that runs along the entire bottom, which not only gives the boat excellent hydrodynamics, but also protects the bottom from impacts. The cylinders are divided into independent compartments, which guarantees buoyancy even if one of them is damaged.

Technical specifications and dimensions

The size of the boat allows it to be used on small rivers and large reservoirs, with a full length of 3.4 meters and a width of 1.64 meters. Aqua 3400 NDLD It's very stable, which means you can actually roll over while you're standing or you can move around without fear of flipping over.

The table below shows the basic parameters that will help you compare this model with competitors.

Parameter Meaning Unit of measurement
Total length 3400 mm
Working length of the cockpit 2800 mm
Width 1640 mm
Diameter of the cylinder 420 mm
Load capacity 600 kilogram

An important aspect is the pressure in cylinders and bottom, which is 0.25 atm for NDND and 0.2 atm for cylinders, which provides a rigidity comparable to a rigid body, but retains flexibility when hitting a wave.

⚠️ Warning: Never leave a fully pumped boat in direct sunlight without a tent or in the shade. Heating the air inside the cylinders leads to increased pressure, which can cause seams to rupture or deform the material.

Benefits of the inflatable floor of the NDND

Transition to technology NDMA (The low-pressure inflatable floor, although it's High Pressure in modern times) has been revolutionary for boat owners of this size, and the main advantage is weight. You no longer have to carry heavy sheets of plywood or aluminum, which often have sharp edges and take up a lot of space.

It takes minutes to assemble the boat, and you just need to spread the cylinders, pump them up and install a transom. Time for preparation It's a 2-3-fold reduction in the water output compared to sludge models, which is especially valuable when you need to get down to the water quickly from a steep shore.

Secrets of Durability of BNDT

The bottom of the NDND is made up of many internal partitions that, when pumped, create a rigid structure. To extend the life of the bottom, do not leave the boat pumped for more than 2-3 days without needing. Constant tension of the fabric can eventually lead to microstretches in the areas of adhesion of the partitions. It is better to keep the boat deflated in a cool place.

In addition, the inflatable floor provides better shock absorption as the wave moves, the hard floor transmits all the impacts to the hull and passengers, while the NDNDM extinguishes some of the impact energy, which reduces crew fatigue during long transitions.

Installation and additional equipment

Standard equipment The Aqua 3400 BND typically includes everything you need to start operating, and the basic set includes two inflatable seats (banks) that can be installed anywhere in the cockpit thanks to the Liktros-Lictros mounting system.

Also included is a bag-package, remake, pump and oars, but to fully use the potential of the boat, it is recommended to purchase additional accessories immediately. Transportation wheeled transom It will allow you to move the boat with the motor on the shore alone, which is impossible to do manually due to the weight of the engine.

  • 🚤 Anchor rum - installed in the bow for convenient anchoring without tying the rope to the handles.
  • 🛡️ Defensive quillson - an additional ribbon along the bottom, protecting against abrasion on sand and stones when pulled ashore.
  • 💺 Spinning stops - special holders for rods that can be fixed on cylinders.
💡

When buying a boat, immediately purchase a cover made of dense fabric, which will protect the engine mounting place from sprays of gasoline and dirt, keeping the neat appearance of your boat for many years.

Engine selection and driving performance

For a boat with a length of 3.4 meters, the best choice will be an outboard motor with a capacity of 9.9 to 15 hp. Two-stroke models will provide quick access to planing even with full load. Four-stroke engines will be more economical and quieter, but heavier, which can affect the differentiation.

With a 9.9 hp engine, the boat confidently glides with two passengers. When installing a 15-horsepower unit, the speed can reach 30-35 km / h, which allows you to travel long distances in a short time. differentiation by moving seats or cargo so that the boat's nose does not pick up.

⚠️ Warning: The maximum permitted power of the engine is indicated in the product passport. Exceeding this limit (for example, installing the engine 20 hp on a boat under 15 hp) leads to loss of controllability, risk of rollover and cancellation of the warranty.

On the move. Aqua 3400 It's stable, it's well-directed, it's gently going through a small wave, and it's a wide nose that effectively cuts the water, reducing the splash in the cockpit, and it makes it suitable not only for quiet lakes, but also for Ladoga or Onega in calm weather.

Packaging, transport and storage

One of the key advantages of the model is its compactness in packaged form: a boat bag easily fits into the trunk of most passenger cars. The absence of a hard floor allows you to fold the cylinders more tightly, saving space.

When transporting on the roof of the car in a cover, you must observe the speed mode. PVC material is sensitive to overheating and friction at high speeds. It is recommended not to exceed the speed of 90-100 km / h and securely fasten the cargo with belts.

☑️ Preparation for winter storage

Done: 0 / 4

It is best to keep the boat unfolded or semi-assembled in a warm room, if this is not possible, it is allowed to store in a folded form, but not at sub-zero temperatures, since PVC becomes brittle in the cold.

Frequently Asked Questions (FAQ)

Can I use Aqua 3400 NDNDT for trolling?

Yes, it's a great model for trolling, and the inflatable floor is tough enough to allow downriggers and glider clips to be installed, but in high winds and high sailing, the boat can be demolished, so it's recommended that you use an anchor load of the appropriate mass.

How long does it take to build a boat alone?

With experience and the use of an electric or productive foot pump, full assembly and pumping takes about 15-20 minutes. With a mechanical pump, the time can increase to 30-40 minutes.

Do I need to lubricate the valves before pumping?

No special lubrication is required, the main thing is to ensure that sand or dirt does not enter the valve thread, as this can violate the leakage.

Will the boat stand the rocky bottom?

The 850g/sqm material is strong enough, but sharp stones can damage it. For frequent landings on rocky shores, it is recommended to use a protective ladder or choose gentle sandy areas.

💡

The Aqua 3400 NDNDB is a balance between the mobility of an inflatable boat and the driving qualities of a small boat, an ideal choice for anglers who appreciate comfort and speed of assembly.