Boat. Aquilon 340 It is one of the most popular models of middle-class PVC boats in the Russian market, and is often chosen by both beginner anglers and experienced boaters for the optimal combination of price, load capacity and handling. But how does it suit you? specificationCompare with competitors, analyze the owner feedback and give practical tips on operation.

Model Aquilon 340 manufactured by a Russian company "Breeze." (trademark) BoatMaster) and is positioned as a universal vessel for fishing, hunting and outdoor activities on the water. "B" (according to the classification of GIMS), which allows you to install motors with a power up to 15 hp But it has limitations, like, for example, it has limitations. maximum speed with a 9.9 hp engine rarely exceeds 30 km / h due to the features of the body.

In this article you will find not only the “dry” numbers from the passport, but also the test-test on the water, tips on tuning, and pitfallsThe ones that the manufacturer doesn't mention, like why some owners complain about the wave-stabilityHow to fix it without expensive adjustments.

Technical specifications Aquilon 340: What's hidden behind the numbers

The manufacturer declares the following parameters:

Parameter Meaning Notes
Length 3.40m The actual length of the keel is 3.35 m
Width 1.55 m m m Maximum cylinder width
Boat weight 42 kg Without motor and equipment; the real weight with the kit 60-70 kg
Load capacity 500 kg When fully loaded, controllability on the wave decreases
Max, engine power. 15 hp Recommended power for comfortable operation - 9.9 hp

But these numbers need to be clarified. load capacity of 500 kg This is the theoretical maximum that is achieved by evenly spreading the load. 350-400 kg The boat starts to burrow its nose in the wave, and the stern rises, which makes it difficult to control. 15 hp.

Another nuance. PVCIn. Aquilon 340 density 750 g/m2 (according to the manufacturer), but independent tests show that the actual density is closer to the 700-720 g/m2This is not critical for freshwater, but when operating in salt water or on rocky shores, you should reinforce the bottom with an additional layer of PVC or Kevlar tape.

📊 How much power do you plan to install on the Aquilon 340?
Up to 5 hp.
5-9.9 hp
10-15 hp.
I haven't decided.

Design and features of the body: pros and cons

hull Aquilon 340 It is done according to the classical scheme with V-bottom (Kile-like angle) 12°This gives you advantages on the wavelength over flat-slippers, but it also creates a number of problems:

  • ✅ Stability on course The boat holds the direction well even in the side wind.
  • ✅ Less spraying due to the high cylinders (42 cm in diameter.
  • ❌ Proneness to "snatch" at low speeds (especially with motor) 5-9.9 hp).
  • ❌ Difficulties in pulling ashore Because of the keel, the boat is “buried” in the sand.

One of the most controversial things. cross-boardIn the basic configuration it is made of plywood 12 mm thickIt's a little bit of a power-driven thing that many owners don't think is enough. 15 hp It is recommended to replace it with aluminum or reinforced plywood (18-20 mm).

⚠️ Attention: When operating with a motor 10 hp Check the scaling of the scalp each time. 10-15 motor hoursVibration can weaken the bolts, which will cause the board to tear off as it moves.

And one more thing. slugThere are 3 aluminum cans in the kit, but they're not always convenient for standing fishing, and many owners are replacing them with solid slate or refining the mounts for greater rigidity.

How to check the quality of PVC seams when buying?

When inspecting the boat, pay attention to:

1. Straightness of the seams There should be no “waves” or thickening.

2. The glue color - high-quality glue is transparent or slightly yellowish (dark glue indicates cheap components).

3. Break-off strength - carefully pull the seam in different directions: if the fabric begins to "flake off", it is a marriage.

4. Smell. A sharp chemical smell indicates poor-quality PVC or glue.

Comparison with analogues: Aquilon 340 vs Frigate 330 vs Corvette 340

To understand how Aquilon 340 Competitive, compared to two popular counterparts in the same price range (see below).80 000–120 000 ₽):

Parameter Aquilon 340 Frigate 330 Corvette 340
Length/width 3.40×1.55 m 3.30×1.50 m 3.40×1.60 m
Weight. 42 kg 38 kg 45 kg
Max, engine power. 15 hp 10 hp 15 hp
Kieliness 12° 8° 10°
Price (base) ~95 000 ₽ ~85 000 ₽ ~110 000 ₽

Which one is better?

  • 🔹 Aquilon 340 The best option for those who plan to install the engine 9.9-15 hp It needs good handling on the wave.
  • 🔹 Frigate 330 It's lighter and cheaper, but it's less load-bearing and less stable, and it's good for quiet water.
  • 🔹 Corvette 340 It's wider and stronger, but more expensive, better for fishing with lots of gear.

If your budget is limited, and the water body is calm (lakes, ponds), you can consider Frigate 330But for rivers with the current or for sea walks. Aquilon 340 It'll be safer.

💡

In choosing between Aquilon 340 and Corvette 340 pay attention fittingsUgh. corvette There are often complaints about plastic stains, while the aquilion They are metal (in the basic configuration).

Real water tests: what owners say

We analyzed the reviews more 200 owners Aquilon 340 (forums, social media groups, marketplaces) and highlighted key observations:

  • 👍 Good handling. medium speeds (20-25 km/h) with an engine 9.9 hp.
  • 👍 Low noise levels Thanks to strong PVC and high-quality seams.
  • 👎 "Scouting" at low speeds The boat can be taken aside when trolling.
  • 👎 Weak exceptions in the basic configuration Many of them replace them with stronger ones. BoatMaster Pro.

One of the most frequent questions: "How does the boat behave on the wave?" According to the reviews, at the height of the wave to 0.5 m m m m No problem, but on a larger scale (0.7 m+) The nose starts to burrow and the stern rises. V-bottom And it's short. So, the problem is:

  1. Installation nose-carry (10-15 kg).
  2. Transferring the center of gravity closer to the nose (for example, placing the battery in front).
  3. Reduced speed in choppy conditions.

Another important point. speed-responseWith a motor. 9.9 hp (for example, Yamaha 9.9 FMHS) accelerate to the speed limit 28-30 km/h with one passenger, with an engine. 15 hp speed gain is minimal (32-34 km/h), but fuel consumption increases significantly.

Check cylinder pressure (norm: 0.25-0.3 kg/cm2)| Secure the transom board (recheck the bolts) | Ensure the valves are tight (soap solution) | Check the drainage pump (if installed) | Stock up with a PVC repair kit

-->

Tuning and improvements: how to improve Aquilon 340 costlessly

Even in the basic configuration, the boat is functional, but a few improvements will make it more comfortable:

  1. Tranx reinforcement:

    Replace the standard plywood board with an aluminum ()4-5 mm thickness) or reinforced plywood (18-20 mmThis is especially true when installing a motor. 15 hp.

  2. Slat modernization:

    Replace the collapsible cans with solid aluminum slate with anti-slip coating, which will add stiffness to the case and increase comfort when fishing while standing.

  3. Additional protection of the bottom:

    Stick to the bottom of the boat in places of greatest wear (nose, middle) Kevlar tape or a second layer of PVC. This will prolong the service life with frequent exits to rocky shores.

  4. Improving the keys:

    Standard notches are often luftates. Install adjustable metal (for example, from BoatMaster Pro or Flinc).

If you plan to use a boat for trolling, consider installing electric motor (for example, Minn Kota Endura C2 55It is attached to the nasal transom and allows precise control of the bait speed.

⚠️ Attention: When installing additional equipment (echo sounder, navigator), watch the boat balancing. Excess weight on the nose or stern worsens driving performance and can lead to tipping.

For those who like to fish alone, it is a useful addition. steering-chairIt can be attached to the slate with bolts or screeds, so it can be quickly turned around when you pee.

💡

The most effective modification for Aquilon 340 It's a transom and switch replacement, and it eliminates 80 percent of owners' complaints about handling and reliability.

Operation and maintenance: how to extend the life of the boat

Term of service Aquilon 340 with proper care, it is 8-12 yearsBut many owners are facing problems through 2-3 seasons Because of the errors in operation, here are the key rules.

  • 🧼 Wash after every exit Remove salt (if the boat was used at sea), sand and dirt. Use a soft brush and fresh water.
  • 🔥 Protection against UV rays Keep the boat in the shade or use a special spray (for example, a squirrel). 303 Aerospace Protectant).
  • 🛠️ Valve inspection Once a month, lubricate them with silicone lubricant and check the tightness.
  • ❄️ Winter storage - blow the cylinders off 50% Keep it in a cool, dry place (temperature): +5…+20°C).

One of the most common myths is “The more you pump the cylinders, the better.”In fact, the pressure is excessive.more than 0.3 kg/cm2) leads to:

  • Stretching the stitches.
  • Deformations of PVC when heated in the sun.
  • Risk of rupture when hitting an obstacle.

Optimum pressure for Aquilon 340:

  • Summer: 0.25–0.28 kg/cm2.
  • Winter (cold water): 0.22–0.25 kgf/cm2.

If you notice that the boat has become worse to keep the course or there are “waves” on the cylinders, this is a sign of the boat’s progress. pressure-lossCheck the valves and seams for leakproofness with a soap solution.

💡

Use oil or fuel stains to remove them isopropyl (not acetone!) Apply on the stain, wait 5 minutes and rinse with water.

Since 2021, the rules for registration of small craft in Russia have changed. Aquilon 340 The following rules apply:

  • 📄 No registration. - if the power of the motor ≤ 10.88 hp before 8 kW).
  • 📄 Registration is mandatory - if the power of the motor > 10.88 hp (for example, 15 hp).
  • 🚨 boating license - required at motor power ≥ 5 hp (certificate of the right to operate a small craft).

For registration in GIMS will require:

  1. Passport of the boat (is issued upon purchase).
  2. A contract of sale.
  3. Receipt for payment of the state duty (1 600 ₽ in 2026.
  4. Application for registration (sample on the GIMS website).

If you are buying a used boat, be sure to check:

  • Presence original passport (not copies!)
  • Absence broken-in on the transom.
  • The actual state of PVC (whether there are hidden patches or scuffs).
⚠️ Attention: When buying a used boat with an engine 15 hp Make sure the previous owner has taken it off the GIMS account, otherwise you face a fine before the end of the day. 2 000 ₽ for operating an unregistered vessel.

FAQ: Answers to Frequent Questions

🔹 How many people can fit in Aquilon 340?

Passports, up to 4 people (total weight up to 500 kgHowever, in practice, it is comfortable to place. 2-3 people When fully loaded, the boat loses control on the wave.

🔹 Which motor is better for this boat?

The best option is 9.9 hp (for example, Yamaha 9.9 FMHS or Honda BF10DK2- The engine. 15 hp It gives you a slight increase in speed, but it increases fuel consumption and the load on the transom. Minn Kota Endura C2 55.

🔹 Can I use it? Aquilon 340 At sea?

Technically possible, but with reservations:

  • Maximum wave height. 0.5 m m m m.
  • Mandatory installation nose-carry (10-15 kg).
  • Recommended motor ≤ 9.9 hp (for better handling)
  • Necessary. pump-off for pumping water.

For regular sea trips, it is better to consider boats long from the sea. 3.8 m m (for example, Aquilon 380).

🔹 Which repair kit is better to buy?

Minimum set:

  • Clay. PVC Boat Fix or Bostik 2402.
  • PVC patches (preferably the same density as the boat).
  • Solvent for degreasing (e.g., Solvent 646).
  • A roller for rolling seams.

For serious damage (breakings) 10cm) contact the service.

🔹 Do I need to insure the boat?

Insurance is not required by law, but is recommended if:

  • You operate a boat on large bodies of water (rivers, lakes with a strong current).
  • You have an expensive motor. 150 000 ₽).
  • You often carry a boat by car (risk of accident).

Cost of insurance - from 3,000 /year.