Small metal craft occupy a special niche in the world of domestic shipbuilding, offering fishermen and hunters an affordable alternative to expensive composites. boat Allure 36 It is a vessel that is often chosen by those who value practicality over aesthetic gloss and are looking for a reliable tool to conquer small rivers and lakes.
Many water-engineers are considering buying this model because of its compactness and the ability to transport on the roof of a passenger car. However, before buying a potential owner must clearly understand what type of body he is dealing with. Unlike inflatable counterparts, metal requires a different approach to storage and care, but in return gives a feeling of invulnerability to sharp stones and snags.
In this article, we will discuss in detail all aspects of the operation of this model, from the geometry of the bottom to the nuances of the engine installation. Allure 36 The boat remains a viable choice in a challenging economy and how to properly prepare it for the first season to avoid the typical rookie mistakes.
Structural features of the body
The basis of the vessel is an all-welded hull made of aluminum-magnesium alloys. metal boat It has a high impact resistance and corrosion resistance when properly operated, and it has a flat bottom with a slight bow lift, which is typical of utilitarian models designed for calm water.
The boat's sides are vertical or slightly inward-shaped, which increases the interior space, but can reduce stability in sharp cross waves. Allure 36 It does not have complex contours, which simplifies production and repair, but imposes restrictions on speed.
Stringers and frames are used to reinforce the rigidity of the structure, which also serve as the basis for mounting cans and deck decking. It is the quality of welds that determines the durability of the entire product, so this aspect is given priority when inspecting a new boat.
⚠️ Warning: When buying a used model, be sure to check the condition of the welds in the area of the transom and keel. Microcracks in these areas can lead to rapid sinking of the vessel on the water.
The interior is minimalist, and there's no extravagances that are typical of pleasure boats, and the entire space is given to the payload and the fisherman's gear. Load capacity The model allows you to take on board two adults and the necessary equipment, remaining within safe draught.
Technical specifications and dimensions
The size of the boat is a key factor when choosing the transport for its transportation. Allure 36 It is a class of compact lifeboats, the length of which does not exceed 3.6 meters. This dimension allows you to place the boat in the trunk of the station wagon or on the roof of the sedan using special fasteners.
The weight of the empty structure is another important parameter: metal is heavier than PVC, but lighter than fiberglass, and for this model, the weight without the motor and equipment is about 60-70 kg, which makes it liftable for two people, but heavy for single loading.
Below is a table with the main technical data that will help determine the choice of motor and trailer:
| Parameter | Meaning | Note |
|---|---|---|
| Full length | 3600 mm | Excluding the attachments |
| maximum width | 1450 mm | On the sides. |
| Height of board | 400 mm | In the middle part |
| Load capacity | 300 kg | Including a lot of people. |
| Engine power (max) | 10 hp | Recommended |
It is important to remember that the real loading capacity This can vary depending on the wave height and weight distribution on board, and exceeding the recommended power limits of the motor can lead to burrowing of the nose in the wave and loss of controllability.
⚠️ Warning: Never exceed the maximum engine power specified in the data sheet, which can cause the transom to collapse and the boat to tip over.
☑️ Pre-purchase check
Performance in water
The behavior of a boat on the water depends on the shape of its bottom. Allure 36It offers excellent parking stability and minimal draught, allowing you to approach the gently shore, but on the go, this geometry creates significant resistance.
When going out for planing requires considerable power and proper weighting. Passengers must sit closer to the nose or center to raise the bow, otherwise the boat will "dig" water, creating a high wave and consuming excess fuel.
In calm water, calm or in low winds, this vessel behaves predictably and confidently. Management It's high at low strokes, which is critical for spinning or ventilating, and maneuverability in narrow ducts is also not a problem because of its compact size.
However, it is worth remembering the limitations: going out into open water in winds above 5-7 m / s can be dangerous. Lack of keeliness makes the boat sensitive to lateral turbulence, which can lead to severe onboard rolling and discomfort of the crew.
To improve driving performance and reduce water resistance, it is recommended to regularly clean the bottom of algae and silt using special scrapers or brushes with soft bristles.
Installation and compatibility with motors
The choice of powertrain is a balance between the desired speed and safety, and the 3.6-meter model will be the best solution. petrol-engine power from 5 to 10 hp More powerful units can be redundant and dangerous for such a design.
The boat's trawler is usually designed for standard daywheel. When you install the engine, it's important to monitor the height of the anti-cavitation plate relative to the bottom. If you put the propeller too deep, you'll increase drag, and if you put it too high, you'll get air and the engine will overheat.
Electric motors are also a popular choice for quiet hunting. They are silent, environmentally friendly and do not require complex maintenance. Allure 36 Electric motors with thrust up to 30-40 pounds are suitable, which will allow you to comfortably move around the reservoir for 4-6 hours.
How to properly fix the motor on the transom?
Use the rods that come with the motor, pressing them tightly against the top edge of the transom. Be sure to use the safety cable, running it through the fry bolt on the transom to prevent loss of the motor in the event of a break in the mounts.
Maintenance and durability of metal
The aluminum alloys that make the boat are highly corrosive, but they're not permanent. Galvanic corrosion is the main enemy when the aluminum body is touched by steel or copper parts. electrochemical The correct selection of fasteners is critical.
Regular inspection of the body after each navigation allows you to detect chipped paint or scratches. Any damage to the protective coating should be immediately cleaned and painted with special soils for aluminum to prevent oxidation.
Keeping a boat in the winter also requires compliance, and it is best to keep the boat in a dry, ventilated room upside down, which will prevent moisture and snow from accumulating inside the hull, which, when frozen, can deform the thin metal.
Timely painting of chips and proper winter – the guarantee that the boat will last decades without through corrosion.
Comparison with analogues and modifications
There are many similar models on the market, such as Kazanka, Ob or modern Chinese analogues. Allure 36 They often beat them in price and simplicity, but they can give way in comfort and seaworthiness, a pragmatic choice that needs a workhorse.
There are various modifications of this boat, differing in thickness of metal, presence of deck or reinforced transcel. when choosing, you should pay attention to the specific configuration, since the manufacturer can make changes to the design without changing the name of the model.
Unlike inflatable boats, metal doesn’t require constant drying after every fishing trip, unless it’s a long-term storage, saving time for avid anglers who go out on the pond every weekend and don’t want to waste hours drying cylinders.
⚠️ Warning: Do not use abrasive cleaning products to wash the aluminum case. They can damage the oxide film, which protects the metal from corrosion.
Frequently Asked Questions (FAQ)
Is it possible to go to large water bodies on the boat Allur 36?
The only way to reach large bodies of water (Ladoga, Onega, large reservoirs) is in calm weather and near the shore. The flat-bottomed structure is not designed for a serious wave, and the risk of getting off-shore water or losing stability is very high.
What is the minimum age required to operate this boat?
According to GIMS rules, driving a small vessel with a motor of more than 10 hp requires rights. However, for this model, where the engine is usually up to 10 hp, formally rights may not be required, but knowledge of the rules of navigation and the presence of life jackets is mandatory for everyone.
Do I need to register the boat Allur 36 in GIMS?
Registration depends on the weight of the boat in service. If the weight of the boat with the engine (passported, even if it is not available) exceeds 200 kg, registration is mandatory. For lightweight aluminum boats with a low-power engine, it is often possible to remain within the exemption, but it is better to clarify the current laws in your region.
How to keep a boat outdoors in winter?
If you can't bring the boat into the room, cover it with a tight awning, providing ventilation to avoid condensation. Be sure to turn the boat upside down or install it on special kilblocks so that snow and rainwater do not accumulate inside.