Choosing a swimmer for serious fishing or water recreation often leads to the need to find a balance between compactness in transportation and resistance on the wave. boatThe model has proven to be a reliable option for Russian water bodies, and is designed to meet the harsh conditions of operation, making it popular among owners who value passability and safety.
Unlike budget counterparts, this model offers a reinforced transom and thoughtful balloon geometry, providing excellent germination on the wave. PVC Boats This class requires careful approach to the choice of equipment, because it directly depends on the comfort of the water. In this article, we will discuss in detail the technical nuances that are hidden from view at the first acquaintance.
It is worth noting that Everest modification is often equipped with a high stiffness keel, which is critical for planing with two passengersThis is not just a marketing move, but an engineering solution that allows you to safely operate the boat in winds up to 3-4 points. Let's move on to a detailed discussion of the design features.
Construction and materials of the shell
The basis of durability of any inflatable boat is the quality of the fabric used. In the case of the Everest model, a dense five-layer reinforced PVC is used, which is resistant to abrasion, gasoline and ultraviolet light. Tissue density It's at least 750 g/sq.m., which is the standard for off-road boats, and it's a material that can withstand snags and rocky bottoms better than thin ones.
The designers paid special attention to seams, and they are made by hot gluing, which eliminates the delamination under load. Tightness The compartments are double-stitched, which is important because when you're fishing, you're constantly exposed to dynamic loads, especially in the bow when you hit a wave.
- 🛡️ The use of reinforced PVC density of 750 g / sq.m. guarantees protection against punctures.
- 🔥 The technology of hot gluing of seams ensures the monolithic design.
- ⚓ A reinforced keel-ballon increases the exchange rate stability on the flow.
- 🛶 The presence of a timber around the perimeter protects the sides when mooring.
It's important to understand that the weight of the boat in the transport position depends on the density of the material. If you choose a heavier fabric, you get a margin of safety, but you lose mobility. For single-seater fishing, this may not be critical, but for long-distance casting, weight becomes a significant factor.
⚠️ Warning: When operating in hot weather, do not leave a fully pumped boat in the direct sun unattended. The pressure inside the cylinders may exceed the permissible limits, which will lead to deformation of the seams.
Bottom and hardness of paiola
The comfort of movement inside the cockpit and the boat's ability to plane depend on the type of bottom. aluminum-floorboardIt's very rigid, and it allows you to have more powerful motors, and you can feel safe on the water even when you're fully loaded.
The alternative is a low-pressure inflatable floor (LDPB), which provides great comfort but can play at high speeds. If you want high-speed walks, a hard floor will be preferred. The slate bottom Water-resistant plywood is also found, but it is heavier than aluminum and requires careful drying after each fishing trip.
Building a hard floor takes time, but it's worth it. A hard bottom boat is better shaped and doesn't sail as hard as an inflatable boat, and this is especially noticeable when you're going against the wind.
Tran and motor choice
The key element determining the boat's potential is the transom. In the Azimuth Everest model, it is made of multi-layered plywood coated with water-resistant paint and reinforced with metal or plastic linings. Load capacity The transom allows you to install motors with a capacity of up to 10-12 hp, depending on the modification of the boat.
When choosing a motor, you need to consider not only the power, but also the length of the lower unit. For this model, the best choice will be short-leg (S) motors, if the boat does not have the option of an elongated transom. cockpit It is critical for maximum speed and fuel economy.
| Engine power | Max. speed (1 person) | Fuel consumption | Recommendation |
|---|---|---|---|
| 5 hp | 18-20 km/h | ~1.5 l/h | A cost-effective option for a quiet run |
| 9.9 hp | 32-35 km/h | ~3.5 l/h | Optimal for planing |
| 15 hp | 40-45 km/h | ~5.0 l/h | Only for modifications with reinforced transcension |
Don't push things up and put the engine more powerful than the recommended one, and it can lead to the transom breaking or, worse, to the boat tipping over because of a sudden jump to the planing. Security It should always be a priority.
When installing the motor, always use a safety cable that runs through the ring on the transom, which will save the engine in the event of its falling overboard.
Comfort and ergonomics
The interior of the boat Azimuth Everest is designed to accommodate two people and the necessary equipment, the presence of inflatable seats (cans) allows you to adjust their position, which is convenient for fishing in different conditions. backseat.
In the nose, an anchor shroud is often provided, and in the stern - a liner cable for the convenience of towing. ergonomics The cockpit allows you to move freely without disturbing the balance of the vessel, which is important when catching large fish or setting up a tent.
- 🎣 Possibility of installing holders for rods.
- 💡 Retro-reflective elements on cylinders for safety.
- 🎒 Spacious cockpit for placing a backpack and gear.
- 🔧 Availability of a repair set in the basic configuration.
For night fishing or tent parking, it is important to consider the width of the cockpit, which is enough for a single tent in the Everest model, which turns the boat into a full-fledged floating house.
⚠️ Warning: When installing a tent on a boat, be sure to use additional safety slings so that the sail does not turn the boat over when the wind gusts.
Assembly and descent preparation
The process of assembling a boat requires a certain sequence of actions: first, the cylinders are pumped to working pressure, then the paiole is installed and fixed in the locks, and only then the transom is put in, and the disorder can lead to a skewed structure.
☑️ Checklist for boat assembly
For pumping, it is recommended to use a foot or electric pump with a pressure gauge. Pressure control is mandatory, since an under-pumped boat is less stable, and a pumped one can burst in the sun. Working pressure It's usually 0.25 atm.
How to dry a boat after fishing?
Drying the boat is done in the shade, and direct sunlight when drying can deform the fabric, and moisture inside the folded product will cause mold and rotting seams.
Tuning and refinement
Basic equipment is just the beginning. Many owners start to get started. modernizationThe first thing they often do is change standard oars to lighter composite ones or install an electric motor for trolling, and they also install transom wheels, which make it much easier for a boat to move along the shore.
Sound sounder and navigator need to be properly positioned, and you can attach them to the transom or the sides using a special bracket, and the key is to keep the wires tight if you drill on the side, although it's better to use removable mounts on suction cups or clips.
- 🚣 Installation of transom wheels for easy movement.
- 🔋 Installation of the battery compartment to protect the battery.
- 🎣 Fixing of spinning holders and organizers.
- ⛺ Installation of a tent or tent frame.
Tuning allows you to tailor the boat to specific tasks, whether it's a sport fishing or a family vacation, small investments can dramatically change the level of comfort.
Competent tuning begins with weight relief and improved seat ergonomics, and then moves on to the installation of electronics.
Frequently Asked Questions (FAQ)
What is the maximum pressure to be pumped into the cylinders of the boat Azimuth Everest?
The working pressure is usually 0.25 atm (250 mbar). Exceeding the value of 0.3 atm is strictly not recommended, especially in hot weather, as this can lead to rupture of the seams.
Is it possible to use a boat in winter?
The use of PVC boats in winter is possible, but it requires caution: the material in the cold becomes tougher and more vulnerable to impact, you need to use special frost-resistant lubricants for the valves and avoid sharp cloth overflexes.
How many people can comfortably fit in a boat?
The Everest model is designed for 2-3 people, comfortable for two with a full set of equipment, three people will fit, but space will be limited, which will affect the convenience of fishing.
Do I need to register a boat with GIMS?
Registration is mandatory if the weight of the curbed vessel (boat + engine + equipment) exceeds 200 kg, or if the power of the engine exceeds 8 kW (about 10.88 hp).