Choosing a swimming aid for fishing or resting on the water always involves finding a balance between cost, reliability and functionality. Bester 390 DS It has a special place, causing a lot of discussion among water-engineers, and is positioned as a versatile solution for trolling, fishing in large water bodies and family holidays.
Potential buyers are often interested not only in dry statistics of specifications, but also in real experience of operation in Russian conditions. Owner's reviews They help to form an objective opinion about how the body behaves on the wave, how comfortable the cockpit is and whether the declared load capacity corresponds to the actual capacity. In this article, we will analyze all aspects of the use of this model in detail, based on facts and opinions of users.
It is worth noting that Bester 390 DS It's a class of dural deck boats, which has its own specifications on weight and buildability, and understanding these nuances will avoid disappointment when buying, and let's dive into a detailed analysis of the technical solutions and user experience.
Structural features and materials of the body
The basis of reliability of any inflatable boat is the quality of the material used. Bester 390 DS The five-layer reinforced PVC is used, which has proven to be resistant to mechanical damage and ultraviolet light. The density of the fabric is 850 g / sq.m., which ensures the rigidity of the cylinders even with partial venting of pressure in the sun.
Special attention was paid to the engineers system of seams. Hot gluing The flooring ensures tightness of the joints, eliminating stratification during active operation, which is a critical parameter, since seams often become a weak point in budget counterparts. The bottom is made of a denser material - 1100 g / sq.m., which increases wear resistance when in contact with sand or pebbles.
Technical details of seams
In the production of two-component polyurethane adhesive is used, which polymerizes at high temperature, creating a monolithic compound stronger than the PVC material itself.
The design of cylinders includes protective linings around the perimeter, which take the main blow when mooring. Bester 390 DS It has three inflatable compartments, which ensures buoyancy even if one of the cylinders is damaged, a safety requirement that is mandatory for vessels of this class.
- 🛡️ PVC reinforced High density protects against punctures and cuts.
- 🔥 Hot gluing It ensures the durability of the stitches in all conditions.
- ⚓ Protective tapes The sides prevent the abrasion of material on the pier.
Dural flooring and floor rigidity
The key feature of the DS model is the presence of dural flooring, which, unlike plywood, does not absorb moisture, does not rot or deform over time, making the boat virtually immortal in terms of flooring, which is especially important for storage in unheated garages or outdoors.
However, it is worth considering that dural If you want to be mobile and have a lot of assembly and disassembly alone, it can be a big factor. The floor is made up of several sections that connect to form a single rigid platform. The rigidity of the structure allows you to stand on your feet even on a small wavelength.
To facilitate the assembly of the dural floor, use rubberized surface gloves - the metal can be slippery and sharp on the edges of the sheets.
The floor surface is anti-slip, which makes it safer to move around the cockpit in wet shoes, and the system of fixing the sheets to the cylinders is designed reliably, eliminating the displacement of elements during movement, which creates the feeling of being in a full-fledged hard-bottom boat.
Comfort and ergonomics of the cockpit
Interior space Bester 390 DS It's designed to meet the needs of the fisherman. flat-bar Not only do they protect the cylinders, but they also provide a hand support or attachment to the extra equipment, and the shape of the cockpit allows you to accommodate two or three people with a full set of gear without feeling too crowded.
The seats in the basic configuration are usually soft, with the ability to adjust the position. They are attached to stringers or special pockets on cylinders. For trolling, additional platforms are often installed, since regular seats can interfere with the wiring of baits. The height of the board is sufficient to ensure that water does not overwhelm the cockpit even during sharp maneuvers.
The ease of boarding and disembarking is ensured by the presence of soft perimeter handles, which are located so as not to interfere with rowing or motor control. The bow often provides a platform for anchor or sonar, although in the basic version it may not be, and you will have to buy accessories separately.
Driving qualities and behavior on the water
On the water. Bester 390 DS It's predictable and stable, and with its inflatable tubes, it's a great way to mitigate the impacts of the waves, which reduces crew fatigue during long journeys. Keel structure provides good course stability, especially when installing a motor with a capacity of 9.9 hp and above.
When going full load, the boat needs the right weighting. If you move the load too far into the nose, yaw on the course can increase. Optimal cruising speed allows you to travel long distances with minimal fuel consumption. The bottom with a pronounced keel holds the trajectory well even in lateral winds.
⚠️ Attention: When installing the maximum power motor (15 hp), be sure to use transom wheels and watch the angle of inclination of the lower unit to avoid the nose different.
The boat's maneuverability at low speeds is high, which is convenient for fishing in a snag or off the coast. However, the inertia of the inflatable hull requires addiction when turning sharply at speed. In general, the driving specifications are consistent with the declared class and allow you to feel confident in large reservoirs.
Comparison of specifications with competitors
For objective assessment Bester 390 DS Compare it to the popular ones in this sizing class, and here is a table showing the main parameters that influence the choice of the buyer.
| Parameter | Bester 390 DS | Competitor A (Fanera) | Competitor B (PVC floor) |
|---|---|---|---|
| Floor material | duraluminium | Plywood is waterproof | PVC inflatable |
| Boat weight (kg) | ~52 | ~58 | ~38 |
| Load capacity (kg) | 650 | 600 | 550 |
| Sex service life | Unlimited. | 5-7 years | Depends on care. |
As you can see from the comparison, Dural floors offer a benefit in durability over plywood, which can eventually dissect, but the weight of the boat is less than the inflatable floor models, which are much lighter and more compact when assembled, depending on the priorities of perpetual flooring or maximum lightness.
The manufacturer’s pricing policy also plays a role. Bester 390 DS It's often more affordable than big brands with similar specifications, making it attractive to those looking for reliability without overpaying for marketing, and build quality in this price range is usually above average.
Real experience and typical problems
Analyzing reviewsThere are a number of typical situations that users face, and many people say that the boat is very good at keeping pressure even after wintering in an unheated room, but there are complaints about the quality of the fittings, in particular, plastic valves, which can crack in severe frost.
Another frequent comment is about weight. Bester 390 DS It's quite difficult to get ashore, especially if you have to drag it through sand or mud, and having transom wheels becomes not just an option, it's a necessity, and without them, exploitation by one person becomes a lot of physical work.
☑️ Pre-purchase check
However, most users agree that after the first assembly and getting used to the dimensions, the boat becomes a reliable assistant. Pressurization problems are rare and usually associated with mechanical damage, not with a production defect. Repairability of the PVC material allows you to easily eliminate small defects in the field.
⚠️ Attention: Do not leave a fully pumped boat in direct sunlight in hot weather – the pressure inside the cylinders can rise to critical values.
Summary and recommendations
Boat. Bester 390 DS It's a trade-off between the comfort of hard-bottom vessels and the mobility of inflatable vessels, ideal for anglers who value floor durability and are willing to put up with extra weight for that benefit. For family vacations and access to large bodies of water, it's one of the best options in the budget segment.
If your priority is maximum ease and frequent cruising to the water, it may be worth considering inflatable floor models, but if the boat is stored in a garage and used for serious fishing with lots of equipment, then it is a good idea to consider a model with an inflatable floor. dural It will be your main advantage.
The 390 DS best is a choice for durability and durability, requiring a vehicle to transport due to the weight of the kit.
In conclusion, the model has earned its popularity due to its fair value for money, and with proper care and compliance with the rules of operation, this boat will serve you for many seasons, providing safety and comfort on the water.
Which engine is best for a Bester 390 DS?
The optimal choice will be a two-stroke or four-stroke engine with a capacity of 9.9-15 hp This is enough to get on plane with two passengers and cargo. More powerful engines are not recommended due to transom limitations.
How long does it take to assemble and disassemble a boat?
It takes about 15 to 20 minutes for a skilled user to fully assemble and pump the cylinders, and it takes about 10 to 15 minutes to disassemble and lay them, not counting the time to dry if the boat was wet.
Is it possible to use a boat in winter?
PVC boats are possible in winter, but they need to be careful, because the material in the cold swells and becomes more vulnerable to impact, you need to use special frost-resistant greases for the valves and avoid sharp overburdens.
Is it included in the bag for carrying?
The basic package usually includes a bag, but its quality and size can vary. Dural version often requires larger bags or separate cases for cylinders and floor.