Choosing a reliable boat for fishing or resting on the water always involves finding a balance between cost, weight and performance. Armor 320 SCIt has proven to be a workhorse for hunters and fishermen, and it attracts attention for its affordability and robust design, which can withstand regular field loads.
Modification with index SKU This is a sign of sleigh books, which is a profound change in the experience of the control over the inflatable floor, and if you're planning to go out with a motor, or if you're just appreciating the rigidity of the floor when you walk inside the cockpit, that's a crucial aspect. Let's take a look at what's behind the labeling and whether it's worth your attention this season.
In this review, we will not retell the dry numbers from the catalog, but analyze the real aspects of use, from the quality of the seams to the behavior on the wave, all the nuances will be considered as objectively as possible so that you can make an informed decision about buying.
Structural features and materials of the body
The basis of any inflatable boat is the material from which it is made. Armor 320 SC PVC reinforced is used, which is characterized by high density and resistance to mechanical damage. Five-layer structure The fabric provides protection from ultraviolet, oil, gasoline and temperature changes, which is critical for all-season operation.
The design of cylinders is made by technology Low Pressure High VolumeThis allows them to remain elastic even when the air is partially ejected in hot weather, and it prevents the risk of sutures rupturing when they overheat, although Pressure control is still necessary.The boards have a large enough diameter, which ensures a good landing and a margin of buoyancy.
Special attention should be paid to the reinforcement system: In critical areas, such as the beam and the transom area, additional tapes are pasted, they not only protect against abrasion, but also serve as guides for the installation of attachments. The seams are made by hot welding, which ensures their tightness and durability when properly maintained.
- 🛡️ Material: Reinforced PVC density of 850 g / m2, resistant to puncture.
- 🔩 Tranza: Pluted, reinforced, designed for engines up to 5 hp (maximum 8 hp with caution).
- 🌊 Defense: Reinforced keel and a timber for protection from impacts on stones and shore.
⚠️ Attention: Despite the strength of the material, avoid contact with sharp objects on the shore. Even the most durable PVC can be damaged by carelessly woven stones.
Welding technology
The Armor series uses two-way welding, which eliminates tissue stratification, and unlike adhesives, the weld becomes a monolithic part of the structure, withstanding tear loads better than the fabric itself.
Bottom type: the benefits of hard slates
The "SK" index in the model name means that the boat is equipped with a paiola (hard) bottom in the form of sleigh books. This solution radically distinguishes it from models with an inflatable floor (BBD). parking-stability It allows you to move inside the cockpit with confidence, which is especially important when catching large fish or setting up a tent.
Sleigh books are assembled faster than set floorboards, and don't have a lot of small parts that can get lost. The aluminum profile that the sleighs are inserted into gives the structure an extra torsion stiffness. On the water, it feels like more confident planing and better course stability when driving for an outboard motor.
But there's a downside to this design, and the weight of the paiola boat increases, and the packaged state becomes larger, and if you're critical to every kilogram of gear when you're carrying it to the water, that's a factor that you need to consider beforehand, but for stationary storage in the garage or for carriage in the trunk of a station wagon, that's the best option.
When assembling the bottom, it is important to monitor the correct position of the slings holding the sleighs. They must be stretched evenly to avoid deflections when loaded. Aluminum profiles They should not have a backlash, otherwise an unpleasant creak or knock may appear on the water.
Assembly and preparation for launching
Preparation process Broney 320 SK It takes an average of 15-20 minutes to get out on the water, with experience, the first step is always to lay the boat on a flat surface and clean up the debris, then pump the cylinders to the operating pressure specified in the data sheet (usually 0.2 atm).
After pumping the cylinders, the bottoms are put up, the sleigh books are placed inside the cockpit, then inserted into the onboard profiles, the final step is to install the sleeve board and inflate the keel (if the model provides an inflatable keel for rigidity), and it is important to monitor the sequence of actions so that the valves are not damaged.
☑️ Checklist for boat assembly
For pumping, it is recommended to use a foot or electric pump with a pressure gauge. categorically not recommendedIt's easy to exceed the limits, especially in hot weather, and the pumped boat becomes a drummer and loses its elasticity, becoming vulnerable to impact.
⚠️ Attention: Never leave a fully pumped boat in direct sunlight unattended. The air inside heats up and expands, which can cause the seams to rupture.
Driving qualities and behavior on the water
On the water. Armor 320 SC It exhibits the behavior of classic motor rowing boats, with its narrow stern and pointed nose, it cuts a small wave well, but because of the lack of a full-fledged redane and relatively flat bottom, it is reluctant to glid with only one passenger and minimal load.
The main mode of operation is displacement, in which the boat is stable, stable and predictable in handling. Sailing the model is medium, so with a strong side wind, active oar work or motor course correction may be required.
For a fisherman in a throw or spinning, a hard bottom is a huge plus: you can stand up full-length (with safety precautions) or sit confidently on a bank without fear of falling over, maneuverability at low speeds is high, making it easy to bypass drifts and reeds.
| Parameter | Meaning | Comments |
|---|---|---|
| Total length | 320 cm | Optimal for 2 people |
| Width | 136 cm | Narrow, good speed. |
| Load capacity | 400 kg | With reserve for motor and equipment |
| Boat weight | ~38 kg | Depends on the configuration. |
| Max, engine power. | 5 hp | 2-3.5 hp is recommended. |
The 320 SK Armor boat is ideal for quiet fishing on small water bodies and rivers with moderate currents, but is not designed for high-speed walks or open sea water.
Installation and attachments
Standard equipment Broney 320 SK It usually includes the boat itself, two cans (seats), a bag for packaging, a remix and a passport. However, for full operation, additional accessories are often required.