Choosing a reliable boat for fishing or family vacations on the water often boils down to finding a balance between price, quality and functionality. In the segment of inflatable boats made of PVC, a special place is occupied by domestic models that in recent years have not only caught up with, but also in many ways overtake foreign competitors in terms of cost and reliability. Flink 340It has become one of the most popular modifications in the manufacturer’s line.
This model is designed to operate in a variety of environments, from the calm water of small lakes and reservoirs to the outlet to the river with a moderate current. The designers paid special attention to the strength of the bottom and cylinders, since these elements are most often subjected to mechanical stress. PVC The high density material used in the manufacture guarantees resistance to puncture and abrasion, which is critical when landing on a rocky shore or dragging a boat with a drag.
In this review, we will take a closer look at the technical details, design features and real-world experience of this model, explaining why the 340 cm dimension is considered the “middle ground” for most water engines, and what hidden advantages this boat has that are not mentioned in the advertising booklets, and we will also discuss the issues of equipment and compatibility with various types of outboard motors.
Design features and materials of manufacture
The basis of durability of any inflatable boat is the material it's made of. Flinc 340 five-layer reinforced PVCThis material is not just air-holding, it is highly resistant to ultraviolet radiation, gasoline, oil and temperature changes, and has a fabric density of 750 g/sq.m., which is the standard for mid-range boats, providing a great balance between weight and strength.
The design of the bottom deserves special attention, unlike budget models with low-pressure inflatable floors (see below).NDMA), it uses a moisture-resistant plywood floor, which allows higher speeds and provides a hard drive, which is especially important when water is turbulent. Aluminum stringersThe slabs connecting the floor sections have a reinforced design and reliable fixation, preventing their displacement even during active maneuvers.
⚠️ Attention: When assembling the solder floor, always check the density of the stringers to the cylinders. An insufficiently inserted stringer can damage the inside of the cylinder when pumping a high-pressure boat.
The cylinders are divided into independent compartments, which ensures that the vessel is unsinkable even if one of them is damaged, all seams are made by hot welding, which excludes the stratification of the material over time. Flinka 340 It is also equipped with a bolt around the perimeter, which protects cylinders from impacts on the berths and sides of other vessels.
- 🛡️ Reinforced 5-layer PVC density of 750 g / sq.m. with protection against UV radiation
- 🪵 Pied bottom of water-resistant plywood with reinforced aluminum stringers
- ⚓ Reinforced hinge beam around the perimeter to protect against mechanical damage
- 🧵 Seams made by the hot welding method, guaranteeing 100% tightness
Dimensions, capacity and load capacity
The 340 in the model name indicates the total length of the boat in centimeters. This is the optimal size for a two-man adult with a full set of fishing equipment. The hull is 148 cm wide, which provides good stability and allows you to feel confident on the water even when the fishermen move abruptly. The height of the balloon at 36 cm creates enough board to prevent waves from overflowing the cockpit when moving against the wind.
Load capacity Flinka 340 It allows you to carry up to 450 kg of payload, which includes the weight of passengers, motor, battery, fuel and equipment, Passport capacity is 2 people, but if necessary and following safety measures, the boat can be used for three, although comfort in this case will decrease. Operating pressure in cylinders is 0.25 atmosphere, which is the standard value for ensuring rigidity of the structure.
⚠️ Attention: Never exceed the maximum load capacity specified in the data sheet. Overloading the boat reduces the height of the board above the water, which is critically dangerous when going out on a wave or high wind.
In the nose is located inflatable kielsonNot only does it provide the boat with better driving performance, but it also acts as a storage lock. The inflated keel also serves as an additional safety camera, improving overall safety. The packaged dimensions allow the boat to be transported in the trunk of most wagon or hatchback cars.
For those who plan long stays, the possibility of installing an awning or a running canopy is important. The design of the cylinders involves the installation of arcs, although they may not be available in the basic configuration, which makes the boat versatile for various use scenarios, from fast fishing to multi-day camping.
Driving qualities and compatibility with motors
One of the main questions when choosing a boat is the power of the recommended engine. Flinc 340 The optimal range is considered to be engines with a capacity of 5 to 9.9 horsepower. With a motor of 5 hp, the boat confidently goes to planing with one person and cargo, developing a speed of about 20-22 km / h. Installation of a more powerful engine, for example, 9.9 hp, allows you to plane already with full load (two people plus equipment) at a speed of up to 30-32 km / h.
The tranza plate is made of reinforced plywood and protected by a stainless pad that prevents abrasion when the engine is attached. The transom height is standard at 381 mm (15 inches), which is suitable for most outboard motors. The hard solder bottom combined with an inflatable keel provides excellent course stability. The boat does not prowl in straight areas and predictably enters corners.
When operating at high speeds, it is important to distribute the weight correctly, the battery and fuel tank are better placed closer to the center or slightly in the nose, so as not to overload the transom. planing The Flink 340 is a mode of propulsion in which the boat glides across the water surface, significantly reducing drag. It is quite easy for the Flink 340 to enter this mode thanks to optimized cylinder contours.
- 🚤 Recommended engine power: 5–9.9 hp
- ⚓ Maximum speed with engine 9.9 hp: up to 32 km / h
- ⚖️ Weight distribution: shifting the load to the center for better plane output
- 🌊 Wave Behavior: Confidently Cutting the Wave Due to Kieliness
Package and ergonomics of the cockpit
The interior of the boat is designed to meet the needs of anglers, the cylinders are liner rings to which you can attach gear, anchor flap or additional accessories. The bow often has an anchor rum, which facilitates anchoring. For the fixation of fishing rods, you can use regular holders or install additional elements on the transom.
The seats (banks) in the basic configuration are usually rigid, made of the same moisture-resistant plywood as the floor. They are installed on special mounts-liktros or brackets, which allows you to adjust their position or remove them altogether to increase the usable space. Some versions can be equipped with soft seats with the ability to adjust the position of the backrest, which increases comfort during long transitions.
An important element of ergonomics is the presence of handles for carrying, which are symmetrically arranged on cylinders and reinforced with plastic linings, which allows you to easily carry the boat even in full gear (although this is not recommended with the engine), and the aft part also provides a handle for grabbing when pulling the boat ashore.
Small items can be stored in cockpit pockets on the inside of cylinders, although small in size, they are ideal for a phone, keys or documents. flinct It also provides the possibility of installing a sonar and a navigator on special brackets attached to a bank or transom.
Technical specifications in detail
To fully understand the possibilities of the model Flinc 340 It's important to look at the numbers, and it's going to help you compare the boat to other manufacturers and make a good choice, and it's worth noting that the actual numbers may be slightly different from the passport numbers because of the temperature and pressure in the cylinders.
Below is a table with the main technical specifications that are key in the operation and transportation of the vessel.
| Parameter | Meaning | Note |
|---|---|---|
| Total length | 340 cm | Overall length |
| general width | 148 cm | Maximum cylinder width |
| Load capacity | 450 kg | Including the weight of the boat and equipment |
| Boat weight (with paioles) | 42 kg | Without motor and equipment |
| Working pressure | 0.25 atm | Maximum 0.3 atm |
The weight of a boat of 42 kg is quite acceptable for a class of solder boats of this size. Of course, it is heavier than models with an inflatable floor, but the gain in driving performance is worth it. When transporting alone, it is recommended to use a cart or ask for help, as the weight of the assembly with the engine and battery can exceed 70-80 kg.
☑️ Pre-launch checks
Care, maintenance and durability
And Flink 340 It has served you for many years, you need to follow simple rules of operation and storage. PVC The material does not require complex maintenance, but is sensitive to improper drying before packaging. After each release, especially if the boat was used in salt water or stood in the sun, it must be rinsed with fresh water and thoroughly dried.
It is recommended to keep the boat straightened but slightly deflated at room temperature, and if this is not possible and the boat is kept in a rolled-up state, it should be laid out and pumped every few months to restore its shape and avoid cloth cloth cloth cloth in the folding areas, which is especially important in winter, when the material becomes more fragile.
⚠️ Attention: It is strictly forbidden to dry the boat in a rolled-up state or under direct scorching rays of the sun inflated form on a hot day, this can lead to deformation of the seams and stratification of the material.
Check the valves regularly and whether there is sand or dirt in them. A grain of sand that gets in the valve can break the seal, causing the air to get etching. Use soft cloth and warm soapy water to clean. Aggressive chemical solvents can damage the protective layer. PVC.
Comparison with competitors and final conclusions
The 3.4-meter inflatable boat market is highly competitive. Flinc 340 It competes well with brands such as Frigate, Hunter and Riviera, often citing its thicker, better PVC as its main advantage, and its sophisticated balloon geometry that provides better wave germination, while some competitors may gain weight by using thinner materials or inflatable bottoms.
Compared to models with NDMA (low pressure inflatable floor), the floorboard bottom Flink 340 wins in speed and stability on the current, but loses in weight and build time. The plywood floor boat takes 15-20 minutes to assemble, whereas the NDNDM can be prepared in 5-7 minutes. So the choice depends on the priorities: speed and driving performance or mobility and ease.
In the price segment, this model is a niche for affordable mid-range boats, not the cheapest, but offers quality comparable to higher-end brands. For a fisherman looking for a reliable workhorse for regular trips to the pond, this is one of the best deals at the moment.
Frequently Asked Questions (FAQ)
Can I use the Flink 340 for diving?
Yes, the boat is suitable for diving, as it has enough carrying capacity for two divers with cylinders. However, it is recommended to install additional holders for cylinders and make sure that the sharp edges of the equipment do not damage the cylinders of the boat.
What pressure should be in the cylinders in winter?
The pressure should remain standard (0.25 atm), but the boat should be pumped in a warm room. In the cold, the pressure will fall due to air compression, which is normal. The main thing is not to pump the boat in the heat, expecting that in the cold the pressure will become normal, this will cause the seams to rupture.
Is the pump and remix included?
Usually, the boat is sold in the basic configuration without a pump and seats, but with a remix. The exact composition of the delivery depends on the specific seller and lot, so always check the equipment before buying.
Is the boat compatible with electric motors?
Yes, the Flink 340 is perfectly compatible with electric outboard motors. The Tran can withstand the weight of standard electric motors. It's an environmentally friendly and quiet option for fishing, especially in waters where gasoline engine noise is prohibited.