Choosing a swimming aid for fishing or resting on the water always involves finding a balance between cost, reliability and functionality. flyboat A medium sized look at the models. bottlenose 390This vessel has proven to be an affordable option for access to large bodies of water, where stability and the ability to install a powerful engine are required.
Why is this particular model attracting the attention of buyers this season? bottlenose 390 It combines time-tested design with modern materials, making it competitive even against the backdrop of well-known brands, and buying this vessel is not just a waste, but an investment in comfortable outdoors, if you approach the choice of equipment.
In this article, we will discuss in detail whether or not buy It's this model, what are the nuances of operation and what to pay special attention to when inspecting before the transaction, you will get comprehensive information that will help to avoid mistakes in the selection.
Technical specifications and design features
The model range with the index 390 implies a length of the vessel almost four meters, which places it in the category of full-fledged keel boats. Dimensions It allows two, and if necessary three, adult passengers to comfortably accommodate with a full set of equipment, and the width of the cylinders and the cockpit are optimized for maximum wave stability.
The basis of the design is PVC material It's a high density, which is resistant to abrasion, exposure to fuels and ultraviolet light. thickness In different parts of the boat may differ: the bottom is usually reinforced with a reinforced layer to protect against rocky shores, while the sides are made of lighter, but stronger material.
⚠️ Attention.When buying, be sure to check the integrity of the seams. Insufficient gluing or "bubbles" of air under the PVC layer can indicate a violation of production technology, which is critical for water safety.
The keel design provides excellent seaworthinessThe boat can easily dissect the wave and does not traverse the course when driving for an outboard motor, and the presence of a rigid transom allows you to install engines with a capacity of up to 20-25 hp, which makes it possible to develop a solid speed even when fully loaded.
To check the quality of the seams on the new boat, slightly press on the joints of the cylinders - they should be elastic and not be wobbled inside, emitting a characteristic crunch only when compressed strongly.
Package: What is included in the standard set
Buying. bottlenose 390It's important to be clear about what you're getting in the basics. standard-set It can be different from the extended one, usually including the boat itself, a hinged transom, a bag-pack and a repair kit.
However, you may need additional elements to be fully operational, such as the presence of fittings It's not always guaranteed in the basic version, but it's also worth paying attention to the quality of the bag: cheap material can quickly become unusable when transported over rough terrain.
- 🛶 Inflatable vessel itself with a pasted floorboard or inflatable floor (BND).
- ⚓ Set of two inflatable seats (cans) with the ability to adjust the position.
- 🔧 Remachine: patches, glue, key for valves and instructions for operation.
- 📦 A transport bag made of durable fabric with webbing for carrying.
Some vendors offer stock-packIt's often the quality of the accessories that are included in the kit is poor, and it's better to spend that money on buying specialized equipment separately.
Comparison with competitors: why choose bottlenose
The market for inflatable boats is saturated with offers, and The bottlenose bottlenose 390 competes with brands such as Flagship, Mnev and Hunter, and the main advantage of this model often lies in the ratio of price to weight. boat This is a crucial factor, especially if the transport is carried out by one person.
Unlike the heavier plywood floorboard, the inflatable floor modifications can significantly reduce the weight collected, making it easier to get to the water and load into the car. bottom-stiffness models with NDNDM may be inferior to plywood counterparts, which should be considered when planning long transitions in shallow water.
Let’s take a look at the comparative table of specifications Bottlenose bottlenose 390 and its direct competitors:
| Parameter | bottlenose 390 | Competitor A (Flagship) | Competitor B (Mnev) |
|---|---|---|---|
| Length, m | 3.90 | 3.90 | 3.85 |
| Width, m. | 1.60 | 1.55 | 1.62 |
| Load capacity, kg | 650 | 600 | 700 |
| Weight, kg | 48 | 52 | 55 |
As you can see from the table, bottlenose It's a weight gainer, but it can be slightly lower in terms of maximum payload than the top models of competitors, depending on which is more important to you: mobility or the ability to carry the maximum amount of cargo.
Choosing the type of bottom: slate or NDND?
One of the most important issues when buying is the choice of the design of the bottom. The bottlenose bottlenose 390 can be equipped with a removable plywood floorboard (sleigh) or have a low-pressure inflatable floor (NDMAEach option has its advantages and disadvantages, which must be weighed in advance.
The removable slate provides perfect flat-surface It's a cockpit walk, and it's a better protection from the cold of the water, and it doesn't slide, and it gives the boat extra stiffness, but it takes longer to build it, and it increases the weight of the plywood sheets.
The secret of quickly assembling a boat with sludge
Always collect floorboard on a flat surface without stones and debris, so as not to damage the inner surface of the cylinders with sharp edges.
Option C NDMA It's much easier to operate. You don't have to build a boat, you just need to pump the tanks and the bottom, and it takes 10-15 minutes versus 40-60 minutes for a sleigh model, and it takes up less space in the trunk when it's deflated.
- 🌊 Comfort.: NDND is softer to the touch, but less stable when cruising in shoes with a hard sole.
- 🚗 Transportation: Sleigh boats require a larger trunk or roof of the car.
- 🔨 DurabilityPlywood can eventually dissect from moisture if moisture-resistant laminated plywood is not used.
⚠️ Attention.If you plan to use a boat during the cold season, NDND will be preferred as the air in the bottom works as an additional cold water insulator.
Operation and care of PVC materials
And The bottlenose bottlenose 390 served you for many years, you must follow the rules of operation. Polyvinyl chloride The material is strong, but it's afraid of certain effects, and the main enemy of PVC is open fire and sparks, so smoking in or near a boat is strictly prohibited.
After each fishing, the boat should be washed with fresh water, especially if you have been swimming in salty water bodies or standing in reeds. The sand and dirt, when dried, work as an abrasive, gradually destroying the protective layer. specialized, free of solvents.
Storage should be carried out in a dry, cool place, away from the heaters, it is recommended to periodically (once a season) pump the boat and leave inflated for a couple of hours to straighten the folds of the material. tenure products.
☑️ Annual TO boats
Where to buy a boat and what to look for
Having decided buy Bottlenose bottlenose 390, you'll be faced with a choice of place of purchase: Official dealers, online stores and bulletin boards - each channel has its pros and cons. Buying from an authorized dealer gives a manufacturer's guarantee, which is an important insurance factor.
When ordering via the Internet, carefully study. photo Sometimes sellers use stock photos, which may be different from the actual product. Pay attention to the date of production: buying a boat that has been in storage for three years is not recommended, because plasticizers in PVC can begin to lose their properties.
If you're considering buying used, be sure to check the boat inflated. Leave it for a few hours and watch out for it. pressureEven a small drop in pressure would indicate a micro-puncture that you'd have to look for and seal.
The best time to buy a new boat is late autumn or early winter, when sellers make sales to vacate warehouses before the new season.Buying from an official dealer with a check is the only way to get real warranty support in the event of a production defect of seams or valves.
Frequently Asked Questions (FAQ)
What is the maximum weight of the engine to be put on the bottlenose bottlenose 390?
On the transom. Bottlenose bottlenose 390s are recommended to be installed with a power up to 15-18 hp for comfortable operation. Installation of a motor with a capacity of 20 hp is possible, but will require caution when driving and can lead to rapid wear of the transom board when driving aggressively.
Do I need to register this boat with GIMS?
According to the current legislation of the Russian Federation, registration is required if the weight of the boat (boat + engine) exceeds 200 kg. bottlenose 390 When in running order, it weighs significantly less (about 50-60 kg without a motor), while with a light motor it often does not require registration.
Can I repair the boat by myself?
Yes, small punctures and cuts are easily repaired with a remix, using a special PVC glue and a patch of the same material, and it's important to degrease the surface and ensure a tight press for 24 hours.
Will the boat survive the winter fishing?
Materials PVC It retains elasticity at low temperatures, but becomes more rigid, and can be operated up to -10...-15 °C. However, in the cold, the material becomes more vulnerable to mechanical damage, so increased caution is required.