The choice of a reliable boat for fishing or resting on the water often leads to the study of products of domestic manufacturers, among which the brand is a great source of water. Flagship It's a very big company, but it's a very big series. Igla The (needle) is noteworthy for its unique combination of load capacity and maneuverability, and its 380 centimeter length makes it a versatile tool for calm lakes and sea waves.
Owners often point out that it is in the size of 3.8 meters that the middle ground for two or three people with a full set of equipment is hidden. The design of cylinders and bottoms here is designed to minimize water resistance while ensuring a high level of safety. Flagship 380 Igla It has been a bestseller for many years, and what technical nuances you should know before buying.
Particular attention should be paid to the quality of materials and assembly, which directly affect the durability of the product. Using five-layer reinforced fabric and reliable adhesive seams allows you to operate the boat in harsh conditions without risk of damage.
Technical specifications and construction of the body
The basis of any inflatable boat is the material from which it is made. Flagship 380 The high-quality PVC with a density of 850-900 g/m2, which is resistant to ultraviolet, fuel and mechanical damage, is used. The design of the cylinders is complex, which not only gives the product a great appearance, but also improves its driving performance. The cylinder diameter of 48 cm provides significant spare buoyancy, allowing you to place on board up to 750 kg of payload.
The most important element of the design is keel-strengthened (NDND), which is the hallmark of the series IglaUnlike simple plyol floors, this uses a system of rigid stringers inserted into special pockets of the inflatable floor.
- 🚀 Significantly improve planing and entering the mode.
- 🌊 Increase stability and exchange rate stability on the wave.
- 🛡️ Protect the bottom from impacts on stones or logs due to shock absorbing properties.
⚠️ Attention: When assembling a boat with NDND, make sure that the stringers are inserted evenly and to the point. Incorrect installation can lead to deformation of the bottom when pumped.
Dimensions of the product inflated state are 380 cm long and 168 cm wide. The weight of the inflatable floor kit varies depending on the modification, but usually does not exceed 65-70 kg, which allows it to be transported in the trunk of a passenger car or on a trailer. For ease of carrying, soft handles are sewn into cylinders.
It is worth mentioning the system separately. sealingAll joints are glued with overlap, which guarantees absolute water resistance even when in the water for a long time, the pump valves are made of durable plastic and have a reliable locking mechanism that prevents spontaneous air outflow.
Review of modifications: for an outboard motor and oars
Manufacturer Flagship It offers customers flexibility in their choice of equipment, which is a big plus, and it's basically divided by engine type and transom design, and you can choose a version that's sharpened to a powerful gasoline engine, or a lighter modification to use with an electric motor and oars.
Versions with the prefix "M" or "Tranets" are equipped with a glued transom of plywood reinforced with plastic. The transom thickness is 25 mm, which allows you to install motors up to 15-20 hp. timber-lamp, which protects the cylinder from rubbing against the side of the pier and adds rigidity to the structure.
For those who like quiet fishing or small-scale water owners, there are versions without a transom or with a removable transcenza-pawn, in which cases the boat becomes much easier and its use with oars turns into pleasure due to optimal balancing. The oars that come with the package are made of aluminum alloy with plastic blades, which makes them light and not susceptible to corrosion.
A comparison table of the main modifications will help to determine the choice:
| Model | Type of bottom | Max, engine power. | Passenger capacity | Kit weight (kg) |
|---|---|---|---|---|
| Flagship 380 Igla NDNDM | Inflatable | 15 hp. | 3-4 people. | ~68 |
| Flagship 380 Igla M | Inflatable | up to 20 hp | 3-4 people. | ~72 |
| Flagship 380 Igla Luxury | Inflatable + slate | 25 hp. | 4-5 people. | ~85 |
| Flagship 380 (without transom) | Inflatable | Suspended/Ousla | 3 people. | ~55 |
When choosing between models, it is important to consider not only the power of the engine, but also the operating conditions. For shallow waters and overgrown rivers, the light version is better suited, whereas for large water areas and trolling fishing, the version is indispensable. Luxury. with additional reinforcements.
When choosing a motor for a boat 380 cm optimal power is considered 9.9-15 hp This ensures confident planing with two passengers and economical fuel consumption.
Comfort and ergonomics on the water
Staying on the water for hours requires special attention to comfort detail. -- Engineers Flagship And we've taken this into account by introducing a number of solutions that make fishing fun, and the boat seats are not just plywood shops, but ergonomic structures with soft pads that are attached to cylinders with special belts, so you can adjust their position depending on the situation.
The interior of the 380 is designed to provide maximum freedom of movement, high sides protect against splashes even in high winds, and wide cockpits allow you to comfortably fit with fishing rods or spinning.
One of the key features is the system effluenceWhen heated in the sun, the air inside the cylinders expands, and without special valves, this could cause the seams to rupture. Automatic valves fire when critical pressure is reached, preserving the integrity of the structure.
The storage of personal belongings, documents and telephone is provided with a sealed pendulum in the nose, this space is isolated from the main volume and water, which guarantees the safety of valuables. D-ring for anchor feeder or safety cable attachment.
The secret of a comfortable night
The Flagship 380 can be fitted with an inflatable tent or tent, making the boat a complete place to sleep on the water.
Preparation for launch and assembly
Properly assembling a boat is a guarantee of your safety and long service of the product. Flagship 380 Igla It takes about 15-20 minutes to go out on the water if you have experience. For pumping, it is recommended to use a foot or electric pump with a pressure gauge to control the pressure in the cylinders (optimally 0.25 atm).
So, assembling the NDND floor requires a sequence of actions, so you fold the shell, then you put in stringers, and then you pump it up, and you make sure that the stringers don't twist and fall into their grooves.
Below is a checklist that will help you not forget anything before getting on the water:
☑️ Checking before exit
⚠️ Warning: Never leave a fully pumped boat in direct sunlight unattended for long periods of time. The thermal expansion of air may exceed the estimated limits, even with valves.
Once assembled, you need to check the reliability of the mounting of the transom and motor. If you use an outboard motor, make sure that lower unit does not touch the cylinders when you turn. strap-belt.
When assembled in the cold season, let the boat rest in a warm room before inflating. Cold PVC becomes rigid, and its sharp straightening can lead to microcracks. Plasticity of the material gains at room temperature.
Care, storage and repair
To the boat Flagship 380 It's been a true story for years, and it needs to be taken care of properly, and every time you go out, especially on a salty water or in a polluted river, you have to rinse it with fresh water, and that will wash away the salt, sand and organics that can break down the PVC structure.
Drying is a critical step before packaging, and even minimal moisture inside the bag can cause mold and unpleasant odor, and dry the boat in the shade, in the straightened form, avoiding direct sunlight on wet fabric.
Store the product in a dry room at a temperature of -20 to +40 degrees Celsius. It is recommended to completely inflate the boat every six months and check the pressure to make sure that there are no micropunctures. To repair minor damage, a rim kit is included, including PVC fabric and glue.
If you find a puncture, the damage site should be degreased, cleaned and sealed according to the instructions. For more serious damage, such as joints, it is better to contact a specialized service center, where you will produce a professional vulcanization Or re-painting.
Timely drying and storage in a case at room temperature increase the service life of the PVC boat twice.
Frequently Asked Questions (FAQ)
What is the optimal pressure to pump into the cylinders of the Flagship 380?
The recommended operating pressure is 0.25 atm (250 mbar). In hot weather, you can slightly reduce the pressure to 0.2 atm to compensate for the thermal expansion of air. Pumping above 0.3 atm is not recommended.
Can I use the Igla Flagship in winter?
You can use the boat in low temperatures, but with caution. PVC blubbers in the cold and becomes more vulnerable to impacts. You need to use special frost-resistant greases for the valves and avoid sharp cloth overburdens.
Which motor is better to choose for this model?
For the model 380 cm ideal two-stroke or four-stroke engines with a capacity of 9.9 - 15 hp Motors of this power will provide a speed of about 30-35 km / h with full load and will be economical in fuel consumption.
Will the boat fit in the trunk of the sedan?
In folded form, the bag with a boat Flagman 380 has dimensions of about 110x50x40 cm In most sedans it will not enter without folding the rear seats or stacking diagonally, but in the station wagon or hatchback fit without problems. For the sedan, it is better to consider the option with a trailer or roof.