The search for a reliable swimming means for fishing or resting on the water often leads potential buyers to the products of the Novosibirsk plant. PVC boat Azimuth It is deservedly considered one of the market leaders in Russia due to the combination of affordable prices and time-tested technologies. Many users begin their acquaintance with the brand with the study of information on the official resource of the manufacturer, where the full range of current models is presented.
But just going to a site is not enough to make a smart choice, and the huge range, the different series and the many options can confuse even an experienced boating. website It's not just a showcase, it's a source of technical documentation, certificates and up-to-date price lists, and it's here that you can find information about new products that haven't been included in the review articles on third-party resources.
In this article, we will discuss in detail how to navigate the catalog, what are the differences between the Pro, Sport and Fishing series, as well as what technical nuances should be paid close attention before buying. You will learn where to find genuine products and how not to make mistakes with the configuration so that your first voyage is perfect.
Official resource of the manufacturer and navigation on the catalog
The first thing that a user is looking for boats The Internet is a lot of dealers and stores, and it's critical to distinguish the official portal of the plant from the middlemen, because only the manufacturer gives full warranty and access to original parts, and navigation on the main site is usually based on the principle of division into series, which makes it much easier to find the right model.
The main menu usually contains sections dedicated to specific product lines. Profi It is aimed at those who need maximum load capacity and hardness of the bottom, while the series is aimed at the bottom. Light It's designed for light transport enthusiasts, and understanding this classification allows you to quickly cut off the wrong options and focus on the real candidates to buy.
⚠️ Warning: Beware of clone sites that offer prices well below market prices. Original products always have the appropriate quality certificates and a product passport with a hologram of the plant.
You should also look at the Documentation or Service section, which often includes bloating schemes, care instructions, and spare parts catalogs, and the availability of such information in the public domain is a sure sign of brand reliability. For beginners, the FAQ or Question-Apply section, which collects typical problems and solutions, will be useful.
Boat Series: differences Profi, Sport and Fish
The range of the plant is huge, and to avoid confusion, you need to clearly understand the difference between the main series. Each of them was created for specific tasks, and using the model for other purposes can lead to rapid wear and tear or discomfort on the water. Technical specifications They're very different.
- 🎣 Fish series (Fishing): It is designed specifically for anglers, has wide cylinders for sustainable sitting and is often equipped with comfortable sleighs.
- 🚀 Sport series (Sport): It is focused on speed specifications, has a more streamlined nose shape and is designed to install more powerful motors.
- 🛡️ The Profi series (Profi): maximum reliability, enhanced PVC, double bottom and reinforced keel for use in difficult conditions.
When you choose between these categories, you have to be honest about where and how you're going to use the boat most often. If you're going to be excited about going to a large reservoir, you're going to have to go to the series. Profi They're the only solution that's right, and they can withstand a lot of stress. tranny It allows you to put high-power motors without the risk of deformation.
For lovers of quiet hunting on small lakes or rivers with a calm current, the series models are quite suitable. FishThey are lighter, more compact when folded and often have special markings for rod holders.
Secret of marking models
In the model name, the numbers often indicate the length in centimeters and the letters are the type of bottom, for example, "320 NDND" means a length of 3.2 meters and the presence of an inflatable floor with an inflatable keel.
Materials and production technologies
The basis of durability of any inflatable boat is the material it is made of. Azimuth uses multi-layer reinforced PVCIt's a very dense, ultraviolet resistant fabric that you can always find on the official website the exact specifications of the fabric used in a particular model, which allows you to assess its wear resistance.
The welding technology is particularly noteworthy: unlike adhesives, welds provide a monolithic structure, eliminating moisture and temperature dissection, a critical parameter, as seams are often the site of problems in active use.
| Parameter | Standard PVC | Reinforced PVC (Profi) | reinforced cord |
|---|---|---|---|
| Density (g/m2) | 750 - 850 | 900 - 1100 | 1100+ |
| Resistance to abrasion | Medium | High. | Maximum. |
| Temperature conditions | -30..+50°C | -40..+60°C | -50..+70°C |
| Application | cruising. | Fishing, tourism | Extreme, rocks. |
In addition, the quality of the fittings is important: foundry valves, hand pumps and can mounts must be made of materials that are not susceptible to corrosion. stainless steel or high-strength composites, which increases the service life of the product at times.
When buying, pay attention to the valves: they should have protective caps and ensure tightness even at significant internal pressure.
Types of bottom: slate, NDND or plywood
The choice of bottom type is perhaps the most important technical issue that the buyer decides, and it depends not only on the speed and handling of the boat, but also on the weight of the entire kit, as well as the time it takes to prepare for the launch. There are three main types of design.
The first option is plywoodIt's a classic solution where the floor is assembled from individual sheets of plywood, connected by stringers, which are cheaper, lighter in weight and dry faster, but it takes longer to assemble, and on the water you can feel every joint between the sheets.
⚠️ Warning: Plywood sleighs require drying after each use, and the wet plywood left in the assembled form will quickly lose its strength and dissect.
The second option is NDMA (Low Pressure inflatable floor) This is the modern standard of comfort, and an inflatable floor boat has excellent seaworthiness, because the cylinders act as shock absorbers on the wave, and these vessels are faster and better able to handle, but they weigh considerably more and require a powerful pump.
- 🪵 Plywood slate: Budget, easy to repair, but hard on the water and long to collect.
- 🎈 NDNDM: comfortable, fast, good cross-country, but heavier and more expensive.
- 🧱 Aluminum floor: It is rare, very firm, but cold and noisy.
For those who value time and comfort, the choice is obvious in favor of an inflatable floor, while the priority is the minimum weight for carrying in a backpack or trunk of a small car, then slate-book Or slate is the best solution, and it's important to consider that NDND boats require more careful valve care and pressure control.
☑️ Checking the bottom before buying
Package and additional options
When buying a boat, it is important to understand what is included in the basic equipment and what you will have to pay separately. Often advertised price attracts the buyer, but in the end it turns out that without the purchase of additional accessories, operation is impossible. Official website Usually, the composition of the set is clearly regulated.
The standard set usually includes the boat itself, the bag-pack, the pump (often foot), the remix and the instruction. However, for a full fishing, this may not be enough. Many models allow installation. transom-wheelThis makes it much easier to transport a heavy boat along the shore to the water.
It is also worth considering the possibility of installing safety-liner This option is critical for safety: you can grab a leech if you fall overboard or use it to attach gear, and it can be expensive to ignore it in a big water emergency.
You can also order spinning holders, anchor rums, even sonars, and factory mounts are more reliable than homemade ones, because they are glued with professional glue and tested for separation, and you don't need to save on safety by installing collective farm structures on cylinders.
Where to buy and how to check the originality
The question of buying is particularly acute in the era of advanced online trading. Azimuth It is best for authorized dealers, a list of which can be found on the official website of the manufacturer, which guarantees not only the originality of the product, but also the possibility of receiving service.
When receiving the goods, be sure to check the integrity of the package and the presence of the product passport. Inside must be an insert with the date of production and a stamp of OTC. The absence of these documents may indicate that you are either a defective product or a product released without quality control.
Also, pay attention to the quality of the packaging of the seams and the edgings: on the original boats, all seams are smooth, without glue leaks (if the connection is glue) or flow (if welded), the edging should be glued tightly, without bubbles and detachments, any defects should be detected before launching.
Buying from an official dealer is the only guarantee that in the event of a manufacturing defect, you will be replaced by the product or returned money without unnecessary litigation.
Frequently Asked Questions (FAQ)
What is the maximum weight of the engine can be put on the boat Azimuth?
The maximum power of the engine depends on the specific model and is indicated in the product passport. Usually for boats with a length of 320-360 cm, a motor with a capacity of up to 10-15 hp is recommended, and for larger models - up to 20 hp. Exceeding this limit can lead to the destruction of the transom.
Do I need to register a PVC boat in GIMS?
According to the current legislation of the Russian Federation, boats weighing more than 200 kg (in running order) or with an engine of more than 8 kW (about 10.88 hp) are subject to registration. Most light PVC boats with low-power engines do not require registration, but you need to have documents for the boat and the engine with you.
How to keep a boat in the winter?
Keep the boat in a dry, cool place, protected from direct sunlight, it is recommended to keep it in a slightly inflated state or in a straightened form to avoid PVC clogs.
What is the difference between the boat Azimuth from competitors (Flagship, Miv)?
Azimuth often wins in terms of price and quality of PVC used, and also offers more modern solutions in the field of inflatable bottoms. Competitors may have their advantages in the form of richer basic equipment or specific design solutions, but Azimuth remains the leader in the availability of spare parts.
Can I repair the boat by myself?
Minor repairs such as puncture sealing can be done on your own with the remplekt, but serious damage, especially in the area of seams or transoms, it is better to trust professionals in the service center, so as not to violate the tightness and strength of the structure completely.