Siberian fishing and hunting require incredible endurance, and the Khatanga PVC boat has proven itself to be a reliable boat that can withstand harsh operating conditions. Inflatable boats This brand combines affordable cost with constructive simplicity, which makes them popular among fans of water bodies.
The production is based in Novosibirsk, which already indicates the sharpening of the Siberian conditions, the design of the hull was designed with the need to pass shallow water and overgrown shores. PVC high density provides protection from punctures and abrasion on pebbles.
Owners often point out that it is easy to build and easy to transport, but like any equipment, there are nuances to be aware of before buying, and in this article we will discuss the technical features, models and ways to upgrade.
Structural features and materials of the body
The basis of durability of any inflatable boat is the material of cylinders. PVC The density of the fabric varies depending on the model, but is usually at least 840 g/sq.m. This allows the vessel to keep the board rigid even when fully loaded.
The seams are made by hot gluing, which ensures tightness and strength of the connection. A critical element is the protection of cylinders in the bow and along the sides.Because these are the areas that are most likely to be in contact with obstacles, reinforced linings extend the life of the product significantly.
The design of the bottom is also noteworthy, depending on the modification, a low-pressure inflatable floor (LDPB) or plywood/aluminum floorboard is used. NDMA provides better passability and unsinkability, while a hard bottom allows you to develop higher speeds.
Features of seams
Seams in Khatanga boats are carried out on top, which increases the gluing area and increases the reliability of the connection in places of maximum tension of the material.
Overview of popular models: from Khatanga-280 to 380
The manufacturer's line of products covers a wide range of needs. Hatanga-280It's a single-seat boat, perfect for cruising in calm water or fishing alone, and its main advantage is the minimum weight, allowing one person to carry the gear without undue stress.
Middle-class models such as Hatanga-320 or 340They're already full-fledged double-seaters, they're safe to ride, they're packed with gear, and they're able to get more powerful engines.
For serious expeditions, it is intended Hatanga-380It is a fully-fledged boat-transporter, capable of carrying two adult anglers with full gear, a wide cockpit and high sides provide safety and comfort in all weather.
- 🛶 Hatanga-280Single, light, for calm water.
- 🎣 Hatanga-320/340: universal two-seater models for fishing.
- 🌊 Hatanga-380: maximum load capacity and stability.
Installation of the outboard motor and the transclosure board
The key to installing the engine is a transom board, which is usually inserted into special pockets or attached to stringers in Khatanga boats. transomBecause it is the main load when moving.
inflatable floor models often use a removable transom board that is fixed in cylinders, which allows you to adjust the angle of inclination of the engine and its height. Outboard motor The maximum power shall be the same as the maximum power specified in the boat’s passport.
⚠️ Warning: Exceeding the permissible power of the motor can lead to the detachment of the transom board or deformation of the cylinders, which is dangerous for the life of the crew.
When installing the engine, make sure that the fasteners (strubcines) are securely fixed. The vibration on the water is very high, and a poorly clamped motor can shift. Check the screw tightening regularly before each exit.
☑️ Check before starting the engine
Assembly, pumping and preparation for launching
Proper assembly extends the life of the boat, inflates the cylinders to a state of elasticity, but does not pump them in the sun. Air expands when heated, and the excess pressure can break. stitchesUse a pressure gauge to control your pressure.
The assembly procedure is usually: flat surface layout, cylinder pumping, paiole installation (if any), inflatable or hard bottom installation, only after that the seats and squirt board are installed.
When you go down, make sure that the bottom doesn't rub against rocks or shells. PVC You can get damaged by drag on the sharp terrain, you better use a special cart or carry the boat on weight.
Pump the boat 10-15% less than normal if you leave it in the direct sun on a hot day, which will compensate for the expansion of air and prevent the seams from rupturing.
Tuning and refinement: from stringers to anchor anchors
Factory equipment is often minimal, so many owners are engaged in the process of production. tuningOne of the most useful things is to install additional rings that allow you to anchor, tackle or lifeline in the right place.
Installing stringers into the inflatable floor significantly improves performance, the boat is better shaped, easier to glid and steer. NDMA.
The tanner wheels are also popular, and they allow one person to easily move a motorized boat along the shore, and they usually stick to the tanner board and do not interfere with the movement.
| Tuning element | Appointment | Complexity of installation |
|---|---|---|
| transom wheels | Coastal transport | Low. |
| Additional leer rings | Load and anchor anchorage | Medium (requires glue) |
| Hard stringers | Improvement of driving performance | High (size selection) |
| Keel protection | Puncture prevention | Medium |
Puncture repair and PVC maintenance
Sooner or later, any water turbine is faced with the need for repair. PVCThe surface must be defatted and cleaned before applying the glue.
You can do better repairs at home with a warm-up hair dryer, which ensures that the patch is monolithic to the main material, and don't use Moment or any other universal adhesives, because they don't hold the tear load.
⚠️ Warning: Do not put the boat in the cold or in high humidity. The optimal temperature for repairs is from +15 to +25 degrees Celsius.
After the season, be sure to wash the boat with clean salt and dirt water, dry and treat it with a protective compound (for example, silicone-based), which will prevent plastic from drying out and microcracks.
Quality repair with warming up and proper surface preparation makes the boat sealed almost forever at the site of damage.
How to keep a boat in the winter?
The boat must be thoroughly washed, dried and folded in a free state. Do not store it in compressed form under heavy objects. The optimal storage temperature is room, but it is also allowed to store in an unheated room, if temperature changes that cause condensation are excluded.
Can I use the Hatanga boat in winter?
You can use PVC boats in winter, but with caution. In the cold, the material becomes tough and brittle. You need to use special frost-resistant greases for the valves and avoid impacts on the ice. After use in the cold, the boat cannot be immediately warmed up - it must be heated gradually.
Which glue is best for repair?
For PVC boat repairs, two-component polyurethane adhesives (such as Teknipol, Wurt or specialized adhesives from boat manufacturers) are best used to create an elastic and water-resistant seam that can withstand deformation.
How long does the boat Hatanga during active operation?
With care and proper storage, the life of the Khatanga boat is 10-15 years or more, and the main wear usually concerns the bottom and the transom part, which can be replaced or restored if necessary.