Boat. Fuso Jet (or Fuso Jet) is one of the most talked-about models among water enthusiasts in Russia. Fuso Fuso Jet, unlike many budget-friendly models, offers a reinforced design adapted to Russian conditions, from calm rivers to waves in large reservoirs.
In this article, we will discuss specification Comparison with competitors (such as: Finger or Flagship- see Real-life owner reviews We'll give you some advice on engine selection, repair and tuning. unique system of mounting transom, which allows you to install motors with a capacity of up to 25 hp without additional improvements This is a rare solution for boats of this class.
If you are planning to buy or already own Fuso Jet, here you will find answers to key questions: how to properly operate the boat, what accessories are worth buying, and how to avoid typical maintenance errors.
Technical specifications of the boat "Fuso Jet": dimensions, load capacity and materials
Basic model Fuso Jet It belongs to the class of inflatable boats with hard bottom (NDB) and is available in several versions. Fuso Jet 320 A compact but spacious boat with a length of 3.2 meters, the following are the key parameters:
- 📏 Length: 320 cm (there are modifications of 280 cm and 360 cm)
- 📦 Width: 150-160 cm (depending on the configuration)
- 🏋️ Load capacity: up to 500 kg (for version 320)
- 🛡️ Material: PVC 1100 g/m2 (reinforced layer for protection against punctures)
- 🔧 Tranza: removable aluminum, designed for engines up to 25 hp
- ⚡ Weight: 45-55 kg (depending on the configuration)
The model feature is three-layered PVC with a reinforcement net that can withstand temperatures from -30°C to +60°C. This makes the boat suitable for use all year round, including winter fishing. However, the manufacturer recommends avoiding prolonged storage in the cold below -20°C without special handling.
In complete set Fuso Jet Premium add:
- 🪑 Folding seats with adjustable height
- 🎣 Holders for fishing rods (2-4 pieces)
- 🔄 Pump with gauge
- 🧳 Cargo case
| Modifications | Length (cm) | Max engine power (hp) | Passenger capacity | Price (from/to, rub.) |
|---|---|---|---|---|
| Fuso Jet 280 | 280 | 15 | 3 | 85 000 – 110 000 |
| Fuso Jet 320 | 320 | 25 | 4 | 120 000 – 160 000 |
| Fuso Jet 360 | 360 | 30 | 5 | 180 000 – 220 000 |
| Fuso Jet 320 Premium | 320 | 25 | 4 | 150 000 – 190 000 |
⚠️ Attention: When choosing a Fuso Jet engine, keep in mind that payload decreases by 15-20% when installing an engine with a capacity of more than 15 hp This is due to an increase in the load on the transom and aft.
Comparison of Fuso Jet with competitors: which is better to choose?
In the market of PVC boats "Fuso Jet" competes with models from the Finger, Flagship, bark Chinese brands like Sea-ProThe main advantages of Fuso are: Japanese-quality assembly But the competition has its advantages:
- 🔹 Flying wing 320: Cheaper by 20-30%, but PVC is thinner (900 g / m2). Suitable for calm water bodies.
- 🔹 Flagship 330: Wider by 10 cm, but the transom is weaker - a maximum of 15 hp.
- 🔹 Sea-Pro 360: Longer and cheaper, but the quality of glue stitches is worse.
- 🔹 Bark 320: Similar load capacity, but weight 10 kg more.
According to the results of tests of 2023-2026, Fuso Jet wins in the following aspects:
- ✅ Resilience on the wave keel-shaped
- ✅ Trans strength (aluminum 6 mm vs 4 mm in competitors)
- ✅ Completement (The basic version has a pump and repair kit)
If you need a boat for you, extremes (thresholds, strong current), it is worth considering the models with kevlar-bottomed (for example, Zodiac or Bombard), they are 2-3 times more expensive.
When buying, check the certificate of conformity GIMS - the Fuso Jet must be issued for a specific modification (for example, "Fuso Jet 320 with an engine up to 25 hp.").
Which engine is right for the Fuso Jet?
The manufacturer declares the compatibility of the Fuso Jet 320 with engines up to 25 hpIn practice, the choice depends on the purpose of use:
- 🎣 Fishing in calm waters: 5-10 hp (e.g., Honda BF10 or Yamaha 9.9)
- 🚤 Active rest with towing: 15-20 hp (see below)Mercury 20, Tohatsu 18)
- ⚡ High-speed travel: 25 hp (in the end)Suzuki DF25), but the transmessel is required.
Important: two-stroke (for example, Mercury 15) is cheaper but noisier and requires mixing of oil with petrol. Four-stroke (for example, Tohatsu 18) quieter and more economical, but 10-15 kg heavier.
| Motor. | Type | Power (hp) | Weight (kg) | Average consumption (L/h) | Price (rupe) |
|---|---|---|---|---|---|
| Honda BF10 | four-stroke | 10 | 38 | 2,5 | 220 000 |
| Mercury 15 | two-stroke | 15 | 36 | 4,0 | 180 000 |
| Yamaha 9.9 | four-stroke | 9,9 | 37 | 2,2 | 210 000 |
| Tohatsu 18 | four-stroke | 18 | 45 | 3,5 | 250 000 |
⚠️ Attention: When the engine is powered over 20 hp On Fuso Jet 320, be sure to reinforce the transom with an additional stainless steel plate (thickness 4-5 mm). Otherwise, the risk of deformation of the transom during prolonged loads increases by 40%.
Check the integrity of the transom and mounts | Make sure the weight of the motor does not exceed the permissible (see instructions) | Apply silicone lubrication to rubber seals | Conduct a test run on land (without water)->
Operation and maintenance: how to extend the life of the boat?
The life of the Fuso Jet with proper care is 8-12 yearsKey operating rules:
- Wash: After each use, wash the boat. freshwater (especially if used in salt water) Avoid detergents with abrasives.
- Storage: When folded, in a case, away from direct sunlight, optimum temperature: +5°C to +25°C.
- Puncture repair: Use it. two-component (for example, poxipol or Bostik) and patches from the kit.
- Transport: Do not overload the boat on the roof of the car - maximum speed during transportation: 90 km / h.
Mistakes that shorten the service life:
- 🔥 Storage near heaters or open fire (PVC loses elasticity)
- ❄️ Operation at temperatures below -15 C without prior heating of the material
- 🛠️ Use of uncertified adhesives for repair
What if the boat started to let air through?
If the pressure in the cylinders drops faster than usual, check:
1. Valves for the presence of sand or dirt (clean with alcohol).
2. sutures for microcracks (use a soap solution to detect leaks).
3. Puncture cylinders (look visually and by ear).
If a defect is detected, seal it with a patch on both sides, capturing 2-3 cm around the damage.
For winter storage it is recommended:
- 🧴 Process PVC silicone (for example, WD-40 Specialist)
- 📦 Fold the boat without inflections (use the original packaging)
- 🏠 Store in a dry room with a humidity not higher than 60%
Regular treatment of PVC with protective compounds (every 3 months) increases the life of the boat by 20-30%.
Tuning and accessories: how to improve the “Fuso Jet”?
The basic equipment of the Fuso Jet is functional, but many owners are refining the boat to their needs.
- 🔧 The reinforced transan: Replacement of the standard with a stainless steel transom (for engines 30+ hp)
- 🪑 Ergonomic seats: Replacement of regular seats with shock absorbers (for example, from Spinera)
- 🎣 Echo sounder holders: Installation of anchorages Garmin Striker or Lowrance Hook
- ⚡ LED backlight: Flexible strips on the sides for night fishing
- 🛡️ Protective linings: On cylinders and bottom to prevent puncture
For lovers of speed, it is important to replace the standard keel with hydrodynamic (e.g. from HydroforceThis increases the top speed by 10 to 15 percent and improves wave handling, and the cost of this upgrade is from 15,000 rubles.
Among the useful accessories:
- 🧲 Magnetic holder: For knives, hooks and other metal objects
- 📱 Waterproof case: For a phone or tablet with a navigator
- 🔋 Portable battery: For power sonar and illumination (capacity 20,000 mAh)
⚠️ Attention: When installing additional equipment (for example, a second battery) watch for weight-sharingExcessing the load on the stern by more than 60% of the total load capacity impairs handling by 30-40%.
Reviews of owners: real experience of operation
Analysis of feedback on forums (Fish-hobby.ru, BoatTalk) and on social media shows that Fuso Jet is rated on average on 4.5 out of 5The main advantages that users note:
- ✅ Strength:"No punctures in 3 seasons, although I caught on stones" (Igor, Moscow)
- ✅ Sustainability:"At a wave of 0.5 m does not overturn even with a 20 hp engine." (Alexei, Peter)
- ✅ Ease of assembly:“One person collects in 15 minutes” (Dmitry, Yekaterinburg)
Some of the disadvantages are most often mentioned:
- ❌ Price:“Chinese analogues are more expensive by 30-40%” (Sergei, Novosibirsk)
- ❌ Weight:“It is inconvenient to carry alone – 50 kg with an engine” (Anton, Kazan)
- ❌ Package:"In the basic version there are no holders for fishing rods" (Maxim, Krasnodar)
Interesting fact: among the owners of the Fuso Jet, 60% use it for the purpose of fishing25% for the leisure (towing, cruising), and 15% for hunting or tourism.
Repair and maintenance: typical breakdowns and how to avoid them
Even the most reliable boat requires maintenance, and the Fuso Jet has the most frequent problems with:
- Valves: Clogging with sand or dirt. Decision: Once a season, wash the valves with soapy solution and lubricate with silicone.
- SWAMY: Disjunction of adhesives. Decision: Use it. two-component And patches from the remix.
- Trantsom: Overload deformation. Decision: Strengthen the transom with a metal plate when installing motors over 20 hp.
- Bottom: Sharp-point punctures. Decision: Install a protective coating (e.g., PVC mat 3 mm thick).
To repair the punctures will need:
- 🧰 Remake (included in complete form)
- 🧴 PVC cleaner (for example, Acetone)
- 🔥 Fen (to warm up the gluing site)
- 📏 Line and marker (for patch marking)
Step-by-step repair instructions:
1. Clean and degrease the puncture site with acetone.
2. Cut the patch from PVC (by 2-3 cm more damage).
3. Apply the glue on both surfaces, let dry for 5-7 minutes.
4. Press the patch and warm up with a hair dryer (temperature 60-70 ° C).
5. Leave under load for 12 hours.
⚠️ Attention: Don't use it for repairs. superglue or epoxy They destroy PVC and lead to repeated punctures.
FAQ: Frequent questions about the Fuso Jet boat
Can I install a 30 hp engine on the Fuso Jet 320?
Technically possible, but required transprancing (plate of 5 mm stainless steel) and registrationBecause the power is higher than the 25 hp allowed for this model, the risk of cylinder deformation increases with prolonged loads.
How often do I need to pump the cylinders?
Under normal conditions, once-in-a-halfIn summer, check your blood pressure more often (every 1-2 hours) as PVC expands in the sun. 250–270 mbar (instructions)
Is Fuso Jet suitable for sea fishing?
The model is not designed for the high seas, but is suitable for coastal (up to 1 km from the shore) for excitement up to 2 points. 15+ hp engine. and a reinforced bottom.
What's the boat guarantee?
Official guarantee from the manufacturer - 2 years PVC and 1 year Condition: compliance with operating rules and annual maintenance at the dealer.
Where to buy spare parts for Fuso Jet?
Original spare parts (valves, trans, remixes) are sold at official dealers (list on the website) fuso-boats.ruAnalogues (e.g. valves) Valmex) is 30% cheaper but may not be suitable in size.