Choosing a reliable boat for fishing or resting on the water often leads to a long study of the market, where the model is not used. Orca 340 NDLD This boat has become a kind of benchmark in the segment. floater It's a medium-sized, compact transporting vehicle with excellent wave performance, and many aquatic motorists agree that this is the middle ground for one or two people.
The main feature that sets this series apart from the competition is the design of the bottom. NDMA This means that the bottom is made of high-pressure inflatable tubes, not hard plywood or aluminum, and it changes the weight and ease of assembly dramatically, making the process of preparing for the launching much faster and easier for the owner.
In this article, we will discuss the technical nuances, consider the real seaworthiness and answer questions that often arise from potential buyers. PVC boat Orca It has been in stable demand for many years and what hidden advantages it gives when operating in different weather conditions.
Design features and materials
The manufacturer uses high-quality five-layer reinforced PVCThe density of the fabric is 750 g/sq.m., which provides high resistance to puncture and abrasion against the rocky bottom or shell, the seams are made by a tape method, which guarantees the tightness of the joints even during prolonged operation in an aggressive aquatic environment.
A key element of the design is a high-pressure inflatable floor, which consists of many vertical threads that keep the balloon from swelling to the sides, keeping it flat, and this technology allows you to create a rigid surface that is comparable to plywood slate, but weighs several times less, and the boards also have a reinforced structure with a timber around the perimeter.
⚠️ Attention: When pumping the bottom of high pressure, strictly monitor the pressure gauge readings. Pumping in hot weather can lead to rupture of internal threads, screeds, and failure to pump - to loss of driving qualities and deformation of the body.
For ease of movement inside the cockpit, there are inflatable seats-banks, which also serve as stiffness elements. anchor And there's a handy drag handle, and there's liner cables on the sides to insure the cargo, all of the metal parts are made of stainless steel that's resistant to corrosion.
inflatable floor benefits (BBB)
The model's top trump card Orca 340 NDLD The weight of the boat is much lower than that of its slate-bottomed counterparts, which is critical for anglers who travel long distances to the water or are unable to drive close to shore.
The inflatable floor acts as an additional shock absorber, and when you're driving on a shallow wave or hitting water after you're jumping over an obstacle, the impact energy is damped by the air cushion, which makes the ride more comfortable for passengers and reduces the load on the transom and outboard motor, and it also allows you to fold the boat into a more compact case.
But it's also worth noting that the inflatable floor requires more careful surface preparation before it's launched, and that the presence of sharp stones, branches, or thorns can damage the material, so it's recommended to use a protective mat or choose clean assembly sites. swelling It is quite sufficient for confident parking and moving inside the cockpit.
The secret to fast NDND assembly
Pump the bottom to stone only after it has already taken shape. The initial pressure helps to straighten the folds, and the final pumping gives stiffness, which saves time and effort.
Driving and seaworthiness
On the water. Orca 340 It's predictable and stable. It's 3.4 meters long and 1.55 meters wide, and it's very stable, and it allows you to stand up to the full height to throw spinning or to work with a sounder. It's shaped like a balloon with developed cheekbones, and it's very good at climbing the wave and going through the chop.
The boat confidently glides with one adult passenger and minimal load when using a motor with a capacity of 5 hp With a motor of 9.9 hp. gelling It comes almost instantly, and the maximum speed can reach 30-35 km / h depending on the load and the screw. The design of the transom withstands the loads from motors up to 18 hp, although the optimal range is considered to be 9-15 hp.
- 🌊 It holds the course perfectly thanks to the keeliness of the inflated bottom and the shape of the cylinders.
- 🎣 Convenient platform for fishing: wide nose and stern parts.
- 💨 Quick access to planing mode even with full load.
- 🛡️ High degree of safety due to the cylinders divided into compartments.
It is important to distribute the weight of passengers and cargo correctly. Shifting the center of gravity too far into the nose or stern can impair handling and increase fuel consumption. Optimal location in the center or with a slight shift in the stern for better plane. In windy weather, the boat demonstrates good wind resistance.
Technical specifications and configuration
To make an objective assessment of the model, consider its basic parameters compared to typical requirements for boats of this class, these specifications can vary slightly depending on the year of production and the specific modification.
| Parameter | Meaning | Note |
|---|---|---|
| Length/width | 340 cm/155 cm | Optimal for 2-3 people |
| Load capacity | 450 kg | Including boat and motor weight |
| Packaging weight | ~42 kg | Depends on the configuration. |
| Pressure in cylinders | 0.25 atm | board |
| Lower pressure | 0.8 - 1.0 atm | High-pressure NDL |
Standard trim usually includes the boat itself, two inflatable seats, a bag-pack, remix and passport. Some versions can come with topping up wheels or reinforced transom under higher-powered engines. Always check the contents of the box with the seller before buying, as the configurations may change.
Buy a boat in the off-season (fall or early spring) at which time prices are often lower and the likelihood of finding stocks for related goods such as anchors or life jackets is much higher.
Service and preparation for the season
And PVC boat Orca It's been in the water for years, and you have to follow simple rules of operation and storage, and after every time you go out, especially if it's salt water or if it's a body of vegetation, you have to wash it with fresh water and dry it, and when you store it wet, you can get mold and you can smell bad.
Before long-term storage in winter, all valves should be open to avoid condensation inside the cylinders. It is recommended to fold the boat loosely, without strong clamps, periodically changing the places of folds. The optimal storage temperature is from -10 to +30 degrees Celsius, away from heating devices.
☑️ Preparation for winter storage
Check the pressure in the cylinders regularly, especially when temperatures vary. In the sun, the air expands and the pressure can exceed the permissible limits, so on a hot day it is recommended to put excess air through the valve. In winter, when a warm boat is brought into the cold, the pressure will drop, which is a normal physical process.
Choice of motor and attachment equipment
For the model Orca 340 NDLD Two-stroke or four-stroke engines with a capacity of 5 to 15 hp are ideally suited. 5-6 hp motors will provide confident movement with one angler and minimal load, allowing you to go out for planing. For two adults and full gear, it is better to consider 9.9 or 15 hp options.
When choosing a propeller, pay attention to its pitch. For heavy boats or heavy loads, smaller pitch propellers are better suited, which will provide better traction at low speeds. For speedy walks with minimal load, you can use faster propellers. It is also important to find the right height of the motor on the transom.
⚠️ Warning: Do not use motors above 18 hp on this model. Exceeding the recommended power can lead to transom failure, loss of control and dangerous situations on the water.
From attachments, you should first purchase a cat anchor or Hall anchor weighing 2-3 kg, as well as a reliable anchor float. For safety, you need to have life jackets by number of passengers and a water scoop. Installation of a sonar and a navigator will significantly increase the efficiency of fishing.
The optimal bundle for Orca 340 NDND is a 9.9 hp engine and a propeller with a pitch matched to your typical load, which gives a balance between speed, fuel consumption and traction.
Comparison with competitors and final opinion
There are many analogues on the market, such as brand boats. Flagship, Cayman. or Master.. However, Orca 340 It often benefits from time-tested design and spare parts availability, and has traditionally been a high-quality stitch and material density model, as evidenced by years of sales statistics.
Competitors may offer a lower price, but often save on PVC density or trim. Some models have a harder bottom through the use of aluminum profiles, but this increases weight and cost. For most outdoor water enthusiasts, the compromise offered at Ork is the most rational.
In conclusion, it's a versatile craft that will suit both beginners and experienced boaters, easy to operate, reliable to operate, and roomy enough for a full day of fishing. If you're looking for a balance between price, quality and functionality, this model is definitely a must-have.