PVC boat "Three Sharks 260." It is one of the most popular models among fishermen and hunters who value the combination of compactness, load capacity and affordable price, and is positioned by the manufacturer as a versatile vessel for rivers, lakes and coastal areas, but in practice its capabilities depend on the correct selection of the engine, accessories and compliance with operating rules. all the key aspects: from technical specifications to the nuances of repair and tuning.
Model 260 This is the “golden middle” in the lineup. "Three Sharks."It's a type of fish that's suitable for both solo fishing and a company of 2-3 people, and it's often compared to a single fisherman. "Flagship." or "Corvette"But it has unique features, like a reinforced bottom. AirDeck Some of the versions have optimized keel shapes for better handling, but it's not as smooth as the owners have noted weaknesses that you should be aware of in advance.
Technical specifications of the PVC boat "Three Sharks 260"
Basic parameters of the model "Three Sharks 260." It's very attractive to a wide range of users. 2.6 meters allows you to transport a boat even in the trunk of a passenger car (subject to the correct packaging), and the weight of the vehicle is 28 to 32 kg (depending on the configuration) does not cause problems when carrying.
- 📏 Length: 260 cm
- 📐 Width: 130-140 cm (depending on the modification)
- 🔄 Diameter of cylinders: 38-40 cm
- 🏋️ Load capacity: up to 400 kg (maximum)
- 🚤 Recommended engine power: 5-8 hp (depending on the type of water)
- 🛡️ Material: PVC 750–1100 g/m2 (in premium versions)
Special attention deserves bottom-buildingIn the basic version, it is a low pressure inflatable floor (Low Pressure), but in modifications Three Sharks 260 AirDeck or "Three Sharks 260 Slides" It uses a hard, collapsible bottom of aluminum or plastic panels, which greatly improves the ride, but increases the weight of the boat by 5-8 kg.
If you plan to use a boat on the current or wave, choose a modification with a reinforced bottom. AirDeck It is more stable on the go and less "cruising" on the water.
| Parameter | Basic version | Modifications AirDeck | Modifications slide |
|---|---|---|---|
| Type of bottom | Inflatable (Low Pressure) |
Hard collapsible (aluminum) | Plastic panels |
| Boat weight | 28-30 kg | 35-37 kg | 32-34 kg |
| Max, engine power. | up to 5 hp | up to 8 hp | up to 6 hp |
| Speed with a 5 hp engine. | 15 km/h | 20 km/h | up to 18 km/h |
It is important to bear in mind that Hard bottom modifications require more careful care: aluminum panels can corrode when in contact with salt water, and plastic panels can deform when overheated in the sun.If you plan to operate the boat in the sea or in the south, prefer the inflatable floor versions or choose models with anti-corrosion coating.
Pros and cons of the boat “Three Sharks 260”: honest reviews of owners
Analysis of feedback on forums (e.g., FishHunting or Boats-PVC.rf.) shows that the model "Three Sharks 260." There are both obvious advantages and disadvantages that the manufacturer doesn't mention. Let's go through them in detail.
Advantages
- 💰 Price/quality: One of the most affordable boats in its class (from 45 000 to 70 000 rubles, depending on the configuration).
- 🚗 Transportability: It can easily fit in the trunk or on the roof of the car, for carrying enough one person.
- 🛠️ Repairability: PVC material is well glued, patches are kept for years with proper installation.
- 🌊 Sustainability: The width of 130+ cm provides good stability even in sharp turns.
Deficiencies
- ⚠️ Weak stitches: In some instances, the seams begin to “sweat” after 2-3 seasons (especially when stored in the sun).
- 🔧 Motor anchorages: standard transom does not always withstand vibration from motors more powerful than 5 hp - reinforcement is required.
- 💨 Wind protection: low sides (38 cm) do not protect against splashes and wind on the wave.
- 📉 Bottom deflection: In the basic version, the inflatable floor bends under the weight of the engine, which worsens driving performance.
⚠️ Attention: If you are buying a boat for use with a motor more powerful than 5 hp, be sure to check the availability of the boat. ferrot (It comes in basic form in some batches, but often has to be purchased separately) Without reinforcement, the transom can deform after the first season.
What engine to choose for the boat "Three Sharks 260"?
The choice of motor is a critical point on which speed, handling and safety depend. 5-8 hp.But in practice, you need to take into account several nuances:
- 🌊 Type of reservoir: for calm lakes and rivers, 3-5 hp will be enough, and for currents or sea walks, 6-8 hp will be required.
- ⚖️ Weight of load: If you are carrying 2-3 people + equipment, the 5 hp engine will be “underloaded” – the boat will slowly gain speed.
- 🔋 Motor type: Two-strokes are cheaper but noisier and require mixing oil with gasoline; four-strokes are more expensive but more economical and quieter.
Optimal motor options for "Three Sharks 260.":
| Motor. | Power | Type | Boat speed | Pluses | Cons |
|---|---|---|---|---|---|
| Yamaha 5 FMHS | 5 hp | Four-stroke | 18–20 km/h | Quiet, economical, reliable. | Expensive, heavy (27kg) |
| Mercury ME 5M | 5 hp | Two-stroke | 16–18 km/h | Light (22 kg), inexpensive | Noisy, requires mixing of oil |
| Honda BF6DK | 6 hp | Four-stroke | 20–22 km/h | More powerful than 5 hp, but weighs as 5-strong | Price above average |
If the budget is limited, consider Chinese analogues (e.g., the Chinese). HDX T5 or Parsun F5BMS), but be prepared for more frequent TO and less resource.AirDeck) engines up to 8 hp will work, but be sure to increase the transom!
Check the integrity of the transom and fasteners |
Make sure that the weight of the engine does not exceed the permissible (max. 30-35 kg) |
Check the compatibility of the transom height (usually 381 mm)
Secure the engine on land, check the fixation |
Conduct a test run in shallow water--
Comparison with analogues: "Three Sharks 260" vs "Flagship 270" vs "Corvette 260"
To understand how "Three Sharks 260." It is more competitive than its competitors, compared to two popular analogues: Flagship 270. and Corvette 260.All three models belong to the same class, but there are key differences.
| Parameter | Three Sharks 260 | Flagship 270 | Corvette 260 |
|---|---|---|---|
| Length/width | 260 x 130 cm | 270 x 135 cm | 260 x 125 cm |
| Max, engine power. | up to 8 hp (hard bottom) | 10 hp. | up to 6 hp |
| Weight. | 28-37 kg | 35-40 kg | 25-30 kg |
| Price (base) | from 45,000 | from 55,000 | from 40,000 |
| Features | Reinforced seams in new batches, option c AirDeck |
Stronger PVC (1100 g/m2), higher load capacity | The lightest, but less stable on the wave |
What to choose?
- 🎯 "Three Sharks 260." It is optimal for those who are looking for a balance of price and quality, especially in the hard bottom modification.
- 🏆 Flagship 270. Better for a serious load (for example, hunting with a dog or a large catch), but more expensive and heavier.
- 💰 Corvette 260. Budget option for calm water bodies, but not suitable for the wave.
If you need a boat for active fishing on the current or a small wave, Three Sharks 260 AirDeck It will be the best choice for the ratio of price / quality among analogues.
Operation and maintenance: how to extend the life of the boat?
Life of the PVC boat "Three Sharks 260." It depends on proper care, and even the strongest PVC loses its elasticity over time if you don't follow the simple rules.
Cleaning and storage
- 🧼 After each exit: Wash the boat with fresh water (especially if used in salt water) and dry in the shade.
- 🌞 Storage: Avoid direct sunlight – UV radiation destroys PVC. It is optimal to store in a cover or under a canopy.
- 🧴 Lubricant: once a season, treat the seams and valves with silicone lubrication (for example, «WD-40 Specialist»).
Repair and prevention
- 🩹 Small punctures: Use a glue remake kit "PVC-Boat" or «UHU Plus Endfest 300»Stick the patch on the inside and the outside.
- 🔧 Sutures: If the seam starts to “sweat”, glue it with a special glue for PVC boats (for example, Texacol.).
- ⚠️ Tranza: When deforming, reinforce it with an aluminum plate or replace it with a reinforced one (cost 3,000 RUB).
⚠️ Attention: Never use regular superglue or Moment glue to repair PVC boats - they destroy the material! Only specialized adhesives based on polyurethane or chloroprene rubber.
What if the boat started to lose pressure?
If the boat deflates in a few hours, check:
1. Valves – they could be clogged with sand or dust (clean with a needle and lubricate).
2. Sews – often air escapes through microcracks that are not visible to the naked eye (use soap solution for inspection).
3. Punctures -- even a small hole from a fishing hook can cause a leak. Check the boat with a flashlight in a dark room.
Tuning and accessories: how to improve the boat?
Basic equipment "Three Sharks 260." It's often a little bit of a bet, but the boat can be improved a lot with tuning.
Mandatory accessories
- 🔹 Transaction booster: metal plate for motors is more powerful than 5 hp (price ~ 2,500.).
- 🔹 Anchor folding: Weight of 1.5-2 kg is enough to keep the boat on the current.
- 🔹 Pump with gauge: for accurate control of cylinder pressure (optimally 250-270 mbar).
- 🔹 Back seats: Standard seats are inconvenient for long trips.
Advanced tuning
- 🛠️ Echoer: for example, «Garmin Striker 4» It will help you find fish and avoid the shoals.
- 💡 Backlight: LED strips on the sides for night fishing (powered by a 12V battery).
- 🧲 Magnetola: waterproof model (e.g., «Pyle PLMRB27B») for comfortable rest.
- 🔋 Additional battery: for feeding the sonar, pump and illumination (capacity 7-12 Ah).
If you often walk on the current, consider installing remote-controlled steering wheel (for example, «Water Snake»This will facilitate maneuvering and reduce fatigue over long distances.
For inflatable floor boats (Low Pressure) usefully keel (for example, "Kil stabilizer." from "Brig"It improves exchange rate stability and reduces wind drift.
Frequent Questions About the Three Sharks 260 (FAQ)
🔹 How many people can fit in a boat?
Officially, up to 3 people, but only two with gear are comfortable. When fully loaded (400 kg), the boat sits low in the water, which impairs handling.
🔹 Can I use a 10 HP engine?
No, the maximum power allowed is 8 hp (hard bottom modifications only), and exceeding the power will lead to transom deformation and loss of controllability.
🔹 Which pump is better for pumping?
Optimal use pressure-pump (for example, «Bravo BTP-12»It will pump the boat in 5-7 minutes and automatically stop when it reaches the desired pressure (250-270 mbar).
🔹 How long does the boat last with proper care?
With careful storage and regular care of PVC-boat will serve 7-10 yearsMain wear factors: UV radiation, mechanical damage and poor repair.
🔹 Can I keep a boat on the balcony in the winter?
You can, but only if the balcony is glazed and the boat is protected from direct sunlight. Optimal storage temperature: from -10 ° to + 25 ° C. Before wintering, be sure to dry the boat and treat the seams with silicone lubrication.