Finding the perfect swimming aid for fishing or water trips is often a challenge, where you have to balance the desired specifications and budget. RIB Aero Orlan 370It's a trade-off between the maneuverability of a classic inflatable boat and the performance of a full-boat, and it's the rigid bottom and the inflatable tubes that create a unique design that can withstand a serious wave.
Many boaters mistakenly believe that a simple flat-bottom is enough for a quiet fishing, but the conditions on the reservoir can change in a matter of minutes. Orlan 370 It's designed to be fast-moving, even with a few passengers on board, and it's not just a boot boat, it's a complete tool for reaching hard-to-reach places.
In this article, we will discuss in detail the design features, technical nuances and real-world capabilities of this vessel on the water. aluminum alloy D16T In combination with PVC fabric, this is the standard of durability for this class of technology, and understanding these details will help you make an informed decision before buying.
Design features and architecture of the body
The basis of any boat type RIB (Rigid Inflatable Boat) is a rigid hull, which provides stability and allows you to develop high speeds. Aero Orlan 370 It uses a V-shaped aluminum alloy bottom, which makes it very different from a plywood or inflatable floor, and it's a geometry that allows you to effectively dissect the wave, so you can smoothly run and minimize impacts on the water.
The cylinders are made of high-quality five-layer PVC fabric with a density of 850 g/sq.m. This material is resistant to ultraviolet, fuel and mechanical damage. flyboard in this model have a cone-shaped shape, which contributes to better drainage and reduce spray into the cockpit when moving.
The body is assembled using welds, which ensures that it is sealed over many years of use, and unlike adhesives, welding is not susceptible to separation due to temperature changes.
⚠️ Attention: Despite the high strength of welds, it is strongly recommended not to drag the boat on sand or stones without special protection.
The design includes a lumber around the perimeter, which protects the sides from impacts on the berth or on the side of another vessel. polyvinyl chloride in the most vulnerable places.
Technical specifications and compatibility with motors
Length Orlan 370 It is 370 cm wide and 175 cm wide, which makes it a mid-range inflatable vessel, which allows you to comfortably accommodate 3-4 people while maintaining excellent handling, and has a load capacity of 600 kg, which includes the weight of passengers, engine, fuel and equipment.
The key parameter for many buyers is the power of the recommended engine. For this model, the optimal range is considered to be engines with a capacity of 15 to 30 hp. Installing a lower engine will not allow you to go into plane with full load, and excessive power can be dangerous for the transom.
The table below contains the main technical parameters that will help determine the choice:
| Parameter | Meaning | Unit of measurement |
|---|---|---|
| Total length | 370 | centimeter |
| general width | 175 | centimeter |
| Load capacity | 600 | kilogram |
| Recommended capacity of outboard motor | 15-30 | hp |
| Boat weight (without motor) | 75 | kilogram |
The boat’s trawler is made of moisture-resistant reinforced plywood, which allows for long leg (L) or standard (S) motors to be installed depending on the modification.
Comfort and internal equipment of the cockpit
Interior space RIB Aero Orlan 370 The floor of the cockpit is often designed as a low-pressure inflatable floor (LDPF) or rigid aluminum boards, depending on the specific configuration. The hard floor provides stability when cruising and installing additional equipment.
For ease of control of the boat, there are hand-held seats, which also serve as boxes for storing gear, the presence of such elements eliminates the need to take additional bags with you, cluttering the space.
Along the side is a liner cable, which serves as a safety line for passengers, especially when driving on a wave or at night, fastenings for rods, sonar and navigator can be installed at the request of the owner.
Use special soft seat linings if you plan long transitions. Aluminum cans can be cold and slippery, which reduces comfort when fishing for many hours.
The air-emitting system is particularly important, and the valves are designed to allow you to quickly relieve pressure if necessary, although for the purpose of operation In storm conditions, this is rarely done.
Operation: Assembly, storage and transportation
Despite the size of the building, Aero Orlan 370 It has a modular design that allows it to be disassembled for transportation, but unlike lightweight PVC boats, the weight of an aluminum hull requires a car trailer or a spacious trunk of an SUV.
The assembly process takes 15 to 30 minutes depending on the owner's experience. It is important to control the pressure in the cylinders using a pressure gauge. Insufficient pressure will lead to deformation of the body on the go, and excessive pressure will lead to the risk of rupturing the seams in the sun.
☑️ Season preparation checklist
It is recommended to store the boat in a dry room at a temperature of -30 to +50 degrees Celsius. Before laying in the case, be sure to let the fabric dry completely to avoid mold and unpleasant smell.
⚠️ Warning: Never leave a fully pumped boat in direct sunlight for long periods of time unattended. The thermal expansion of air can lead to a critical increase in pressure and strain of the seams.
Transportation on the roof of the car is possible only with the use of special stops that distribute weight. the aluminum bottom has no cushioning, so hard supports can leave dents.
Comparison with competitors and market niche
There are many analogues in the market, but RIB Aero Orlan 370 It's a solid position because of the value of money, and compared to fully inflatable boats, RIBs are better at speed and safety, but they are less at compactness.
Compared to metal boats, inflatable boards provide better shock absorption when hitting a wave and do not require painting. In addition, RIBs are much lighter, allowing less powerful motors to achieve similar speeds.
Why are RIBs more expensive than conventional inflatable boats?
Manufacturing a rigid aluminum case requires complex metal processing, welding in argon environment and precise geometry. It is a time-consuming process that cannot be cheap, unlike sewing a PVC bag.
Many users note that the driving qualities Orlana 370 It's close to small boats, but it's as easy to drive as an inflatable boat, making it a family-friendly model.
The main advantage of RIBs over the classics is the possibility of safe glides on a high wave, inaccessible to boats with an inflatable floor.
Frequently Asked Questions (FAQ)
Can I use the Orlan 370 in winter?
PVC materials can be operated at low temperatures, but it requires special care: the fabric becomes rigid and more vulnerable to impacts; the aluminum case is not afraid of cold, but the metal elements can be slippery; it is recommended to use the boat at a temperature of at least -10 ° C.
What is the best gasoline to put in the tank for this boat?
For two-stroke engines, which are most often put on RIBs, a mixture of AI-92 or AI-95 gasoline is used with a quality two-stroke oil in a ratio of 1:50 (or according to the instructions for the engine). For four-stroke engines, pure gasoline with an octane number specified by the engine manufacturer is poured.
Do I need to register a boat with GIMS?
According to the legislation of the Russian Federation, registration is subject to small vessels weighing more than 200 kg in running order or with an engine with a capacity of more than 8 hp. Orlan 370 Weighing about 75 kg, registration is required only when installing an engine with a capacity of more than 8 hp (which is almost always), and you must have the right to operate a small vessel of the appropriate category.
How to properly wash aluminum bottom?
Use fresh water and a soft sponge. You can use special polyroles for aluminum to remove oxides. You should not use aggressive alkaline or acidic agents that can damage the metal oxide film.
Is it possible to restore small-scale self-punctures?
Yes, there are glue and patch remixes for PVC tubes. For aluminum cases, small scratches can be painted over, and more serious damage (dents, holes) is better repaired in specialized workshops that weld aluminum.