Choosing a boat for fishing or resting on the water often comes down to finding a balance between cost, reliability and functionality. Reef Triton 390This is a model that combines compactness and sufficient capacity for a small company, and this PVC boat has been in demand for fishermen for several years, preferring calm water bodies and coastal areas.
Many users choose this modification for its versatility and ease of service. Reef Triton 390 It's not a record-breaker in speed or seaworthiness, but it does a great job of doing the tasks it was designed for, and in this article, we'll go through the design features, advantages and disadvantages, and give you practical tips for caring for this craft.
It is worth noting that the durability of the boat depends on the correct operation and storage. Reef Triton 390 For regular fishing trips, you need to understand the specifics of the materials and assemblies from which it is assembled. Below is a detailed analysis of all aspects of owning this boat.
Design features and materials
The base of the boat is a dense reinforced PVCIt's a resistant puncture and ultraviolet system, and it's basically an inflatable design. NDMA The boats are cylindrical in shape, which provides excellent rigidity and allows you to develop an acceptable speed for an outboard motor, which has a positive effect on the stability of landing passengers.
An important detail is the presence of keel-bagThis allows the boat to keep its course more confidently and to go more easily to planing when installing the engine of appropriate power. The connection of cylinders is made using reliable seams, but the quality of gluing can vary depending on the batch, so an initial inspection is required.
To protect against splashes and waves in the nose is installed spray-skirtIt effectively cuts off water, but requires careful handling so as not to damage the attachment points during packaging, and it is also worth noting the presence of a transom, which can be removable or glued depending on the specific modification of the year of manufacture.
- 🛡️ The high density of the PVC material used provides protection against mechanical damage.
- ⚓ The presence of a full-fledged keel improves controllability and course stability.
- 🚣 A convenient valve inflating system allows you to quickly prepare the boat for descent.
Special attention should be paid to the tanning board. In the Triton 390 model, it is often reinforced with fiberglass or plywood impregnated, which allows you to install motors up to 8-10 hp. However, you should not abuse the limit values, as this can lead to deformation of the stern.
Installation and interior space
The interior layout of the boat is designed to accommodate two or three people. Siedenia They are usually complete and can be rigid or soft, mounted on switches or special mounts. The space for the legs is large enough to comfortably accommodate the fisherman with tackle.
Standard equipment often includes a carry bag, a pump, a remake and paddles. completeness Oars can vary depending on the seller and the year of manufacture, so always check this point before buying.
⚠️ Warning: Always check for all components immediately after unpacking. A lack of even a small part, such as a valve plug or a pump key, can create problems on the water.
There are pockets or accessories available to store gear and personal belongings, and some owners are upgrading the space themselves by adding sounder platforms or fish boxes, making the boat more functional for specific needs.
Performance specifications
Boat. Reef Triton 390 It's a good performance on the water, provided you load properly, and you can get the right equipment on board, but for a comfortable and safe ride, you can't exceed the recommended passenger limit. You can plane the boat with a 5 hp engine, but you can use 8-9.8 hp as the optimal power.
Wave handling is medium. The inflatable floor of the boat gently passes through small waves, but you can feel yaws in a big excitement. Kieliness The bottom helps to cut the wave, but the lack of hard redane does not allow you to reach high speeds.
The build and disassembly time takes an average of 15-20 minutes with experience; the inflating is better done with a special pump with a pressure gauge to control the pressure in the cylinders; pumping or under-pumping can adversely affect the geometry and driving performance.
| Parameter | Meaning | Note |
|---|---|---|
| Full length | 390 cm | Including inflatable tubes |
| Full width | 165 cm | Maximum cylinder width |
| Load capacity | 650 kg | Recommended payload |
| Boat weight | ~45-50 kg | Depends on the configuration. |
| Passenger capacity | 3 people. | Including the cargo |
It is important to maintain a temperature regime, and although PVC is frost-resistant, it becomes tougher and more susceptible to damage in the cold, and in the summer, overheating in the sun should be avoided, as excessive pressure can lead to strain of the seams.
Assembly, storage and transportation
The process of assembling a boat requires a certain sequence of actions: first, the side cylinders are inflated, then the bow and aft compartment, and only after that, the bottom. NDMAThis ordering is necessary for the proper formation of the geometry of the housing.
☑️ Preparing the boat for the season
For transportation in folded form, the boat is packed in a bag, the dimensions of the bag allow it to be carried in the trunk of a passenger car, but the weight can be significant for one person, it is recommended to use a trolley or transport the boat together.
Keep the boat in a dry, cool place, protected from direct sunlight. Before long storage (for the winter), the boat must be thoroughly washed, dried and folded free of charge, avoiding the formation of permanent clamps on the materials.
⚠️ Warning: Never keep the boat inflated in the cold or in the scorching sun. Sharp temperature and pressure changes can cause seams to rupture or deform the material.
Regular maintenance includes a pressure check and visual inspection, and if you notice a decrease in pressure without visible punctures, there may be a problem with the valves or microcracks in the seams, and timely detection of the defect will save the situation on the water.
Typical malfunctions and repairs
In the process of operation, owners Reef Triton 390 You can face a number of common problems, the most common of which is air poisoning through the valves, which is solved by replacing the sealing rings or cleaning the valve mechanism from sand and dirt.
Punctures and cuts in cylinders require a remix, and for quality repairs, you need to degrease the surface, apply glue, and install a patch of the same material, and it is important to use glue designed specifically for PVC, not universal compounds.
How to properly glue a patch on PVC?
For reliable repairs, heat the surfaces with a hair dryer to 60-70 degrees, apply two layers of glue with drying, then press the patch with a roller hard. Keep under the press for at least 24 hours at room temperature.
Detachment of the tranny board or deformation of the mounts is a more serious problem, and it often occurs when you install an overly powerful motor or improperly centered, repairing this requires dismantling the stern and gluing the elements, which is better entrusted to professionals.
- 🔧 Air poisoning through the valve is solved by replacing the seal.
- 🩹 Small punctures are easily sealed with a remplekt in the field.
- 🛠️ Breaking the seams requires a complete gluing of the joint in the workshop.
Timely detection and repair of minor defects prevents major damage from occurring, and don't ignore the first signs of malfunction, such as having to blow up the boat more often than usual.
Tuning and refinement
Owners often seek to improve the basic equipment of the boat. safety-liner They're also often changing their regular seats to more comfortable models with adjustable backrests.
For fishermen, it is important to install a platform for sonar and holders for rods, these elements can be fixed on boards or transverses without disturbing the tightness of the main cylinders. Using lightweight materials such as aluminum or plastic helps not to overload the structure.
When installing additional equipment on board, use soft pads. Hard contact of metal mounts with PVC can cause the material to wipe on the wave.
Some craftsmen install awning frames to protect themselves from the sun or rain, but remember that the sailing of the boat increases, and it becomes more difficult to operate it in the wind, and the balance between comfort and handling is a key point of tuning.
Any modifications to the boat should be carried out taking into account the preservation of the tightness and balance of the vessel.
FAQ: Frequently asked questions
Can I use the Reef Triton 390 for fishing in large reservoirs?
The boat is designed for calm water bodies, lakes and rivers with moderate currents, access to large reservoirs with high waves is possible only in calm and with great care, since this is not a marine model.
What is the maximum weight of the engine?
The recommended power of the engine is up to 10 hp Exceeding this value can lead to the destruction of the transom and loss of warranty.
Do I need to register a boat with GIMS?
Under current legislation, inflatable boats less than 3 meters long and weighing less than 200 kg (including the engine) are not subject to registration, but the rules may change, so the relevant information should be clarified with the local authorities of the GIMS.
How long does the boat dry after washing before packing?
In dry warm weather, the boat dries for 2-3 hours; in wet or cold weather, drying time can increase to a day; packaging a wet boat will cause mold and decay of the material.