Choosing a swimming aid for fishing or cruising in water bodies often comes down to finding the perfect balance between compactness in folded form and comfort on the water. Riviera boat 3600 NDND CompactThe silk-based model, which was the manufacturer's response to the needs of users who needed mobility without loss of performance, is not just a smaller replica of large boats, but an engineered design where every centimeter of length is used as efficiently as possible.
The main focus of the name is on the dimensions and the type of bottom, the number 3600 indicates a length of 3.6 meters, which is the "golden mean" for two or three people. NDMA This means that there's a low-pressure inflatable floor, which is a huge change in how we build and transport a projectile, and unlike the plywood ones, there's no heavy aluminum or plywood plates, which is a big reduction in the overall weight of the kit.
The word "compact" in this context refers to the optimized width of the cylinders and the general geometry that allows the boat to be packed in a smaller bag, which is critical for owners of small cars or those who plan to transport a vessel in public transport or taxi to the launching site. Universality This model allows you to use it both on calm lakes and on rivers with moderate currents.
Design features and materials
The basis of reliability of any inflatable boat is the material from which its cylinder is made. Riviera 3600 It uses high quality five-layer reinforced PVC, which is highly resistant to abrasion, ultraviolet and fuel (flammable lubricants), and the density varies depending on the modification, but the standard is at least 750 g/sq.m., which ensures that the material is not less than 750 g/sq.m. longevity products even when frequently operated in difficult conditions.
The system of seams deserves special attention. All connections are made by a boat (two-way) seam, which guarantees the tightness and strength of the joints even at high loads on the inflating.
The cylinders are designed to have independent compartments, which is a safety requirement, and if one of the cylinders is damaged, the rest will keep the boat buoyant, allowing the crew to safely reach the shore. flat-bar perimeter, which protect the sides from impacts on the berths, stones or sides of other boats when mooring.
- 🛡️ PVC reinforced: The multilayer structure of the material provides protection against punctures and tears.
- 🔒 Seamless seams: Bilateral slurrying eliminates the possibility of stratification under load.
- 🌊 Protective elements: The keelson and the timber take on the main mechanical effects.
The transom is an important design element. Depending on the configuration, it can be hinged or built-in. The Compact version often features a removable transom, which makes it easier to pack, but the model can also come with a rigidly fixed element for the installation of more powerful motors. The transmolant material is moisture-resistant plywood coated with special enamel or laminate, which prevents rotting and swelling.
Benefits of the inflatable floor of the NDND
The main feature of the model is the use of technology. NDMA (Low Pressure inflatable floor) Unlike the classic high pressure inflatable floor (HPB), which requires high-power pumps and creates a stiff but less shock-absorbing surface, low pressure creates a unique effect.
The bottom, pumped to a working pressure of about 0.2 atm, repeats the surface relief, providing excellent performance. depreciation This makes it more comfortable to be on board, as the impacts on the water are mitigated, and the absence of hard floorboards (floor plates) allows you to fold the boat into a much more compact bag, and this kit weighs significantly less than the floorboard counterparts.
The bottom structure is often reinforced by the keelson, a longitudinal element that gives the boat stability and improves course stability. When moving, the keelson dissects the wave, reducing the yaw of the vessel.
What is the difference between NDND and NDD?
NDND (low pressure) is softer, easier to assemble and better to cushion, but requires caution with sharp objects. NDVD (high pressure) creates a hard floor, similar to plywood, but requires a powerful pump and heavier to assemble.
However, low-pressure inflatable floors have their own operating specifications, which are more vulnerable to puncture than hard floors, so they require careful handling when descenting and choosing a parking spot.
To protect the bottom of the NDND from damage when pulling the boat ashore, use special protective mats or linings, especially if the soil is rocky or contains a shell.
- 🎈 Ease of assembly: The absence of heavy floor slabs accelerates the process of preparing for the water.
- 🚗 Transportability: A smaller volume in packaged form allows you to transport a boat in the trunk of a sedan.
- 🌊 Comfort: Soft bottom reduces the load on the spine during prolonged fishing.
Driving and handling
Despite the relatively small length of 3.6 meters, the boat Riviera 3600 The wide nose provides good swelling, preventing the vessel from burrowing its nose even when it is moving against the current or wind, and the shape of the cylinders is designed to minimize water resistance.
The handling is directly dependent on the correct distribution of load and power of the installed motor. For this model, the optimal power range is considered to be the optimal one, allowing you to get on plane with one or two passengers. When properly loaded, the boat becomes responsive to the movements of the rummel, which is especially important when maneuvering in narrowness or catching fish in overgrown areas.
Stability is another important parameter, and because of the wide enough cylinders, the boat is confidently holding the roll, allowing fishermen to get on board to throw gear or catch a trophy.
Proper loading of the boat (weight distribution of passengers and cargo) critically affects its performance and safety on the water.
| Parameter | Meaning | Impact on operation |
|---|---|---|
| Length | 3600 mm | Optimal for 2-3 people |
| Width | 1550-1650 mm | Provides sustainability |
| Load capacity | 600 kg | Allows you to take equipment |
| Passenger capacity | 3 people. | Comfortable for two. |
Compatibility with motors and installation
Choosing a motor for Riviera 3600 NDND Compact For this length and type of bottom, it is most appropriate to consider two-stroke or four-stroke engines with a capacity of 5 to 15 hp Motors with a capacity of up to 9.9 hp allow you to confidently put the boat on plane with one adult passenger and minimal cargo.
When installing the motor, the standard height for most outboard motors is 381 mm (15 inches) or 508 mm (20 inches) and a faulty installation of a lower unit can lead to cavitation, engine overheating or, conversely, water capture and loss of speed.
For fishing in quiet backwaters or on pressed water bodies, installation will be an excellent solution. electric motorIt is silent, requires no fuel and allows you to move where you are prohibited to drive the engine. Mounting the electric motor is usually carried out on the nose or transom, depending on the design of the boat and the owner's preferences.
- ⚓ transom plate: Must be securely fixed to withstand the thrust of the motor on plane.
- 🔧 Adjustment of angle: The ability to tilt the lower unit helps to set up the boat's course.
- ⛽ Safety: The use of a safety cable (check) is mandatory when driving.
Installation and additional equipment
Basic equipment of the boat Riviera 3600 It usually includes the vessel itself, the bag, the refit, the seats (banks) and the pump, but for full and safe operation, it is recommended to immediately think about purchasing additional equipment. Standard wooden cans can be replaced with more comfortable soft seats with mounts.
An important element is the anchor system. For a boat with a length of 3.6 meters, an anchor weighing 3-5 kg is enough. The presence of an anchor rift and a leer will greatly simplify the process of anchoring. It is also worth paying attention to the possibility of installing rod holders, sonar and navigator.
To store things and protect against splashes, you often get a nose and aft bags that are attached to cylinders, which allow you to keep the necessary small things on hand and dry.
☑️ Basic set for access to the water
⚠️ Warning: Do not keep the boat assembled in direct sunlight in hot weather. Prolonged exposure to ultraviolet light and overheating of air inside cylinders can shorten the life of the material and adhesive seams.
Care, storage and safety on water
Long service life Riviera 3600 NDLD After each release, especially on salty or polluted water bodies, the boat needs to be rinsed with fresh water, which will wash away salt, sand and corrosive substances that can destroy the structure of PVC.
Store the boat in a dry, cool place, preferably in straightened or semi-assembled form, to avoid the formation of cracks on materials in the places of folding. Before long-term storage (for the winter), it is recommended to treat the surface with special means to protect PVC.
Safety comes first. Even if you're a great swimmer, you have to have a good swimmer. lifejacket The boat can flip over because of a sudden gust of wind or wave, and the vest will save a life.
How to dry the boat before packing?
Dry the boat in the shade, in the straightened state. You can't dry it in the direct sun, because the hot air inside the cylinders can damage the seams. Make sure that not only the outer coating is completely dried, but also the inner part of the bottom, to prevent mold from appearing during storage.
Can I repair the boat myself?
Small punctures and cuts up to a few centimeters long can be sealed yourself with the help of the remplekt included in the package. For serious damage, especially in the area of seams, it is better to contact a specialized service, so as not to violate the tightness and warranties.
What pressure should be in the cylinders?
The operating pressure in cylinders is usually 0.2-0.25 atm (about 3-4 PSI). The exact values are always indicated in the product passport or on the label. Pumping cylinders "by eye" in the heat is dangerous, because when heated in the sun, the pressure inside increases.
Is the boat compatible with a 15 hp engine?
Technically, a 15 hp engine is possible if the transom allows. However, for a boat 3.6 meters long with NDL, this power can be excessive for comfortable and safe driving, especially for an inexperienced driver. The optimal range is 5-9.9 hp.
What if the boat starts poisoning the air?
If you hear a whistle or see bubbles in the water, find the leakage site with a soap solution. If the damage is in the field, use a patch from the remix. If it is poisoning at the seam, this is an excuse to go to the service center.