Choosing a boat is always about finding a balance between cost, reliability and functionality, and in this context, it is a great idea to choose a boat. PVC-boat Aquilon The Russian market of inflatable vehicles offers many options, but it is the products of this brand that have proven to be an affordable solution for beginners and experienced water engines. Modern technologies allow you to create durable vessels from reinforced polyvinyl chloride, capable of withstanding serious loads and aggressive environments.
Many potential buyers are wondering why it is worth paying attention to this brand among hundreds of competitors. reinforced PVC It's a very high density, very well designed cylinders that are very stable, and unlike cheap ones, it uses high-quality seam gluing, which is critical for water safety, and then we'll go through the technical details that will help you make a smart decision.
It is worth noting that the versatility of these floating vehicles allows you to use them both under oars and with a motor of various power. Inflatable boats These are great for calm waters, but when properly prepared, they can also handle the excitement of medium altitude, and it's important to understand the specifics of materials and designs, so that the operation is only fun.
Design features and materials of production
The basis of durability of any inflatable vessel is the material from which its hull is made. reinforced PVCThe density of the fabric usually varies from 750 to 900 g/sq. m, which is the optimal indicator for amateur and semi-professional use, and this material structure is not afraid of ultraviolet radiation, fuel and temperature changes.
⚠️ Warning: Despite the high density of the material, avoid contact with open fire or red-hot objects, as this can lead to irreversible damage to the tightness of the cylinders.
Particular attention should be paid to the technology of processing seams, which directly affects the tightness The method of hot gluing using two-part polyurethane glue, which creates a monolithic compound, often stronger than the fabric itself. Unlike crosslinking methods, it completely excludes the possibility of water penetration through the holes from the needle. The quality of gluing can be visually assessed by the absence of air bubbles and the smoothness of the seam.
The design of the bottom also plays a key role in driving performance, depending on the model, a low-pressure inflatable floor (LDPB) or a rigid plywood/aluminum floorboard can be used. inflatable floor It provides maximum comfort and speed of assembly, whereas a hard floor gives you better course stability when driving for an outboard motor, the choice depends on your priorities: mobility or speed specifications.
Why five-layer PVC?
The five-layer structure includes two outer PVC layers, two inner layers and a central reinforcement grid of polyester filaments, which ensures bursting strength and prevents linear expansion of the cylinders under pressure, preserving the geometry of the boat even when heated in the sun.
Overview of popular series and modifications
The product range covers a wide range of needs, from compact single-seat options to spacious catamaran systems. The Diver series is traditionally in demand due to its compactness and the ability to accommodate two people in a rowing version. For those who require a large load capacity, the Omega and Grand models are designed, which are equipped with more powerful transverses and have an increased width of cylinders.
Separately, you need to highlight modifications with keelThe keel allows the boat to keep its course better and to go smoother, which is especially true when using motors from 5 hp. These models are often marked with an additional letter "K" in the name, while flat-bottomed versions are ideal for shallow waters and overgrown bodies of water.
When choosing a particular modification, it is important to consider not only the length, but also the width of the cockpit. Wide models provide greater stability when fishing while standing or from the side, but they can be less maneuverable on narrow rivers. Narrow and long silhouettes are better at dissecting the wave, but require more careful handling when landing.
Technical specifications and comparison of models
To objectively assess the possibilities of various modifications, you need to consider their key parameters in dynamics. Below is a table comparing popular models by basic indicators, such as dimensions, load capacity and permissible engine power. These data will help you navigate the range and choose the best option for your tasks.
| Model | Length/Broadness (see para. | Load capacity (kg) | Engine power (hp) | Kit weight (kg) |
|---|---|---|---|---|
| Aquil 290 N | 290 / 135 | 350 | 5 | 22 |
| Aquilon 320 NK | 320 / 145 | 450 | till 9. 9. | 28 |
| Aquilon 350 NDLD | 350 / 150 | 550 | 15 | 36 |
| Aquilon 390 Comfort | 390 / 160 | 700 | 20 | 45 |
And if you look at the table, you can see a direct correlation between size and function, and HNDM models are usually heavier because of the complex design of the bottom, but they benefit from the comfort of moving around on the water. Load capacity It is indicated with a reserve, however, for safe operation it is recommended to load the vessel not more than 80% of the passport value.
The weight of the kit is another critical parameter, especially if you plan to carry the boat alone or use a small car. lightweight versions up to 25 kg can be easily transported in the trunk of the sedan, whereas larger modifications will require a roof or trailer. Always check the weight in the assembly, including the weight of bags, oars and a pump.
The optimal choice for universal use (fishing + walks) are models with a length of 320-350 cm with the ability to install a motor up to 10 hp.
Operation: assembly, pumping and launching
Proper preparation of the boat for the water is the guarantee of your safety and long service of the product. The assembly process begins with the layout of the boat on a flat surface, cleared of sharp objects. 0.2 atm Pumping balloons in the sun is dangerous because when heated, the air expands and can break the seams.
To control the pressure, it is recommended to use a pressure gauge, especially if you use an electric or foot pump with this function. Insufficient pressure will lead to deformation of the hull and loss of driving performance, and excessive pressure will lead to the risk of rupture. After pumping all compartments, you should allow the boat to lie down for 10-15 minutes and pump air if necessary, since the material may stretch slightly.
- 🛶 Always check for all plugs (valves) before launching, even if you have pumped the boat at home.
- 🌡️ Take into account the temperature coefficient: in the sun, the pressure in the cylinders increases, so it is better to under-pump them minimally on the shore.
- 🔧 Have a repair kit and glue with you, even for short walks - you can puncture the board at any time.
The descent should be done carefully, avoiding sharp impacts on rocks or concrete slabs. If the shore is gentle and sandy, you can assemble a boat right at the water's edge. boat sideways and bring it to the water by slings or handles, and not drag it on the ground so as not to damage the fabric of the bottom with abrasive particles.
☑️ Season-ready
Care, storage and minor repairs
The durability of a PVC boat depends on how you store it in the off-season. After each operation, you must thoroughly wash the hull with fresh water to wash away salt, silt and organic matter. Pay special attention to joints and valves where dirt often accumulates. Before packing in the bag, the boat must be completely dry, otherwise the heat will develop mold, which destroys the fabric structure.
It is best to store the product inflated in the garage or suspended indoors, but this is not always possible. If you keep the boat deflated, avoid deep cloth cloths. The optimal storage temperature is between -20 and +40 degrees Celsius, but it is better to avoid sudden changes. PVC reinforced - durable material, but he does not like prolonged compression with heavy objects.
If you find a puncture or cut, you don't have to panic, and if you have a small lesions, you can easily fix them with a remix that's standard, you can degrease the surface, you can put a glue on it, you can patch it with the same material, and you can let the glue be completely polymerized within 24 hours before it's re-inflated and used.
⚠️ Warning: Never keep the boat assembled in direct sunlight during the summer, which results in the aging of plastic and loss of elasticity of the seams.
To keep the valves from souring during the winter, lubricate them with silicone lubrication before long-term storage, which will ensure easy opening and closing early next season.
Advantages and limitations of operation
To summarize, the key strengths of these boats are: affordable price, good maintainability and versatility. Aquilon boats have proven to be a budget entry ticket to the world of water tourism, allowing you to comfortably fish, sunbathe on the water or just walk on water bodies.
However, there are limitations: when driving against a strong wave or wind, flat-bottomed models may have difficulty with course stability, and the weight of a hard-bottomed kit can be significant for one person, requiring a vehicle to deliver to the water. Speed specifications directly depend on the power of the installed motor and the shape of the cylinders.
For most users, these limitations are not critical, but rather features of operation, which are easy to adapt to. The right choice of model for specific conditions (river, lake, sea) allows you to level the minuses and get the maximum pleasure from rest.
Can I use the Aquilon boat at sea?
Use at sea is possible, but with limitations: models with an inflatable keel and dense PVC (900 g/sq. m) are suitable for calm sea and coastal areas. However, avoid going out in stormy weather and be aware of the corrosive effects of salt water, requiring thorough washing after each use.
Which pump is best used for pumping?
The best option would be a two-chamber foot pump ("frog") or an electric pressure-adjusted pump. It is important that the pump has a pressure gauge to monitor, since pumping in the sun can damage the seams. Hand-held pear pumps are only suitable for pumping.
How long does a PVC boat last with proper care?
The average life of a quality PVC reinforced boat is 7-10 years or more, depending on the frequency of operation, storage conditions and accuracy of the owner, regular inspection of seams and timely minor repairs significantly prolong the life of the product.
Do I need to register a boat with GIMS?
Registration is required if the weight of the curbed vessel (boat + engine + equipment) exceeds 200 kg, or if the engine power is more than 8 kW (about 10.8 hp). For light models with low-power engines, registration is often not required, but the rules may change, so it is worthwhile to clarify the current standards.