Choosing a family-friendly or fishing swimmer often leads to a need to balance cost, capacity and reliability. boat Romantic 2The PVC, which over the years has proven to be an affordable and practical option for medium-sized water bodies, is a classic PVC flat-bottom, ideal for calm water and storm-proof waters.
The design feature is the use of a dense reinforced material, which allows you to withstand significant loads with a relatively small weight of the vessel itself. Romance 2 It's easy to build and it's easy to transport in the trunk of a passenger car, and unlike the more sophisticated keel models, it doesn't require any special skills to get down to the water.
In this review, we will analyze in detail the technical nuances, consider possible modernization options and answer questions that most often arise from potential buyers. PVC materialThe stainless vessel is resistant to ultraviolet light and mechanical damage, but requires proper care to extend its service life.
Design features and materials
The base of the body is high-strength reinforced polyvinyl chlorideIt's a sealed structure that's tough and rigid. Romance 2 It's designed to minimize the number of seams, which reduces the risk of leakage at the joints, and the use of layered fabric allows the vessel to maintain its shape even when fully loaded with passengers and equipment.
An important safety feature is the presence of inflatable onboard cylinders, which are divided into independent compartments, which means that if one of the cylinders is damaged, the boat will not lose buoyancy instantly, which gives time to get to shore. The operating pressure in cylinders is 0.25 atm, which is the standard for flat-bottomed models of this class..
⚠️ Warning: Do not pump cylinders above the recommended pressure, especially in hot weather, as air expansion can cause the seams to rupture.
The bottom is often reinforced with an extra layer of fabric or special linings to protect against abrasion against sand and stones, and the transom is designed with moisture-resistant plywood sheathed with plastic, allowing the installation of a waterproof plywood. outboard The mounts for the oars and seats are made of durable plastic or stainless steel, resistant to corrosion.
Below is a table of the main specifications that will help compare the model with analogues:
| Parameter | Meaning | Unit of measurement |
|---|---|---|
| Full length | 320 | centimeter |
| Full width | 140 | centimeter |
| Load capacity | 400 | kilogram |
| Boat weight | 32 | kilogram |
| Engine power (max) | 5 | hp |
Comfort and interior space
Internal layout Romance 2 It's designed with ergonomics in mind for two or three people, and it allows you to place fishing boxes, gear and personal belongings without compromising your freedom of movement. Inflatable seats or rigid banks (depending on the configuration) provide an acceptable level of comfort even with long transitions.
The floor surface is usually a low pressure inflatable floor (LDPB) or hard plywood slate. The first option provides better seaworthiness and less weight, the second one is a harder platform for standing. NDMA It is better to keep warm and does not require assembly, but can be grinded under weight.
For fishermen, an important aspect is the possibility of installation. tent The cylinders are designed to have a perimeter liner cable to which additional accessories can be attached, which makes the boat a complete shelter from the sun or rain while stationary.
Special attention should be paid to the location of the rowing switches, which are spaced wide enough to allow people of medium and tall height to row without touching the sides with oars. elbow-gauge for a more efficient stroke.
Performance specifications in water
On the water. boat Romantic 2 It's predictable and sustainable because it's flat-bottom, it's great for overgrown fishing, where it's important to be able to get close to shore or reed, and it's not a deep keel that allows you to go through shallow waters that are not accessible to other vessels.
When driving for an outboard motor, the boat develops a speed sufficient to move quickly between fishing points, but it is worth remembering that flat-bottomers are sensitive to lateral wind and wave. Sailing The model is high, so with strong winds, control can be difficult, and it is recommended to use an anchor or a dreck.
The effect of wind on flat-bottom
Flat bottoms create the effect of sliding over the surface, but in headwinds the boat can prowl. Experienced water engines recommend loading the bow for better course stability.
The boat's maneuverability is rated as good at low speeds, which is critical for plumb fishing or trolling. hydrofoil on the lower unit engine, which allows the boat to go faster for planing and save fuel.
In a small wave, the boat behaves gently, extinguishing the impacts on the water due to inflatable tubes. However, sudden movements of the crew can cause swaying, so you should move inside smoothly. Centre of gravity It is best to keep as low as possible, placing heavy things on the bottom.
Motor installation and running tests
Tranza Romantic 2 is designed to install engines up to 5 hp, although some craftsmen put more powerful units with a risk to the design. The optimal choice will be a two-stroke engine weighing up to 20 kg, which is easily carried by one person. Transcent height standard (381 mm or 508 mm depending on the modification), which simplifies the selection of the engine.
When going out for a single-person planing, the boat is doing great with a minimum fuel consumption. With a full load (two people plus cargo), it can be difficult to get to the plane, and the boat goes into displacement mode, in which case it is important to choose the right screw pitch for maximum efficiency.
For a better getting on plane with full load, move the load (battery, boxes) closer to the transom to raise the boat's nose.
Vibration from the motor is transmitted to the body minimally due to the inflatable structure, which reduces the fatigue of the driver. However, the motor mounting must be reliable, so it is recommended to use additional safety ropes. Vomit-spirts (insurance cables) should be fixed for special rims on the transom.
Fuel consumption when using a 5-horsepower engine is about 1.5-2 liters per hour at maximum speeds. In economical mode, when moving into the waters, the flow is reduced to 1 liter, which allows you to take long walks on one tank.
Tuning and improvement DIY
Owners often resort to reworking Romantic 2 boats to enhance comfort and functionality. One of the most popular types of tuning is the installation of stringers, rigid profiles that are attached to the balloons and serve as the basis for attaching equipment, which allows you to free up space on the floor.
Also popular is installation. sonar And we have to use the sealant to install any fixed components, so that you don't break the integrity of the PVC.
☑️ Basic tuning boat
To protect the transom from water jet erosion, a deflector or transom wheels can be installed, which also facilitate the movement of the boat along the shore. transom wheels It is one of the most useful accessories that make transporting a heavy boat an easy walk.
Some anglers put soft linings on cylinders so that you can sit comfortably with your legs hanging over or leaning on the side, such linings are made of porous rubber or a special foamy material that does not absorb water.
Rules of care and storage of PVC-boats
And Romance 2 After each trip, the boat should be washed with fresh water, especially if it was operated in salt water or contaminated water, sand and dirt act as an abrasive, destroying the protective layer of PVC.
Drying the boat before packaging is a must, and even a small amount of moisture inside the package can lead to mold and an unpleasant odor that is difficult to get rid of, and it is better to dry in the shade, since direct sunlight on wet fabric can be harmful.
⚠️ Warning: Do not keep the boat deflated under heavy objects for a long time, this can lead to the adhesion of the inner layers of the material.
For storage, it is better to use a special bag or cover that will protect against dust and rodents. Rodents Often snags PVC, so in storage areas (garage, shed) should use deterrents. Periodically check the pressure in the cylinders and the condition of the valves.
Small puncture repairs are easily done at home with a remix, the damage site is cleaned, degreased and glued with a special glue for PVC. It is important to let the glue dry and gain strength before using the boat, following the instructions on the tube.
Compliance with drying and storage rules increases the life of the Romantic 2 boat by two times, maintaining the elasticity of the material.
Comparison with competitors and final choice
There are many analogues on the market, such as boats. Flagship, hunter or Mev.. However, Romance 2 It beats many of them in terms of price-performance, and it's easier to build than keel models, and lighter than hard-bottomed boats of similar size.
The main competitor is the low-pressure inflatable floor (LDPB) models from other manufacturers. Romance It offers a time-tested design that is easy to repair in the field, and the availability of spare parts and remixes is another plus in its favor.
If you are looking for a low-cost, reliable boat for fishing from shore or water, cruising with family and hunting, this model will be a great choice. It does not require complex maintenance and is ready to work immediately after pumping. Universality The main advantage of this boat.
In conclusion, it is worth noting that during careful operation of the boat Romance 2 It can last for more than 10 years, and it's an investment in a comfortable vacation that pays off with lots of fun moments on the water with a fishing rod or with friends.
What is the maximum weight of the Romantic 2?
rated carrying capacity is 400 kg, however, for comfortable and safe operation, it is recommended not to exceed 300-320 kg, leaving a reserve for equipment and unforeseen circumstances.
Is it possible to use a boat in winter?
The use of PVC boats in winter is possible, but it requires extreme caution: the material becomes rigid and brittle in the cold, the risk of damage to the ice increases many times, and it is recommended to use special winter greases for valves.
Do I need to register a boat with GIMS?
Boats weighing less than 200 kg and with an engine power less than 8 kW (about 10.8 hp) are not subject to registration. Since Romantic 2 is lighter than 200 kg, with a motor up to 5-8 hp registration is not required.
How to properly seal a puncture in the field?
You need to deflate the balloon, degrease the place around the puncture, apply glue to both surfaces, allow you to dry for 10-15 minutes, then press the patch hard and warm up with a hair dryer or leave under the press for several hours.