The search for a reliable swimmer often leads a potential buyer to study the products of Roger, whose official website of the manufacturer serves as the main source of reliable information about the models produced. In an environment where the market is flooded with many brands, it is the reference to the original source that guarantees the receipt of up-to-date data on technical specifications, materials used and current complete sets. Official website of the manufacturer This is not just a showcase of goods, but a tool to avoid buying counterfeit goods and get accurate information about warranty and after-sales service.
The company specializes in the creation of PVC inflatable boatsWhen you look at the catalogue on the plant resource, you see the evolution of engineering from simple rowing models to complex motor complexes with inflatable cockpits and reinforced transverses. It is important to understand that it is through the official sales channel that you can be sure that real specifications meet the declared parameters, such as load capacity and performance. cylinder-capacity.
Navigating the resource allows you to quickly navigate the variety of offers, broken down into categories: for fishing, for hunting, for diving or family recreation. Each section contains a detailed description of the production technologies used in creating a particular series of boats. Quality of stitches and the density of the reinforced material used are key factors that should be paid attention to first of all when studying the product card.
Benefits of buying directly from the manufacturer
The main argument for going to the official website is to remove intermediaries from the supply chain, which allows you not only to control pricing, but also to get direct support from the engineers and plant managers. PVC boat directly, you minimize the risk of encountering an incorrectly selected package or the lack of necessary safety certificates.
In addition, the official portal often offers advanced options for configuration, which may not be available at dealers. nose-curl This approach to ordering allows you to create a vessel that is ideal for your specific tasks, whether it is trolling on large bodies of water or a quiet walk on small rivers.
- 🛡️ Direct warranty from the manufacturer without the need to contact third parties.
- 🔧 The possibility of individual ordering and selection of specific options.
- 📦 Access to complete delivery kits, including remixes and passports.
- 💰 Absence of unreasonable trade margins of retail chains.
⚠️ Note: When buying through unofficial sources, you risk receiving goods that were stored in violation of the conditions, which can significantly reduce the life of PVC materials.
Overview of model range and specifications
The product range on the site covers a wide range of water-powered motor needs, with special attention to the high-pressure inflatable floor (HPD) series, which provide excellent wave germination and stability on the course. reinforced PVCresistant to ultraviolet, fuel and mechanical damage.
The model range includes both compact single-seat versions and spacious vessels longer than 4 meters. The key element of the design is a rigid transom, which can be removable or stationary, depending on the model. reinforced cylinders and additional keels, improving the hydrodynamics of the body.
The specifications of each model are detailed in tables, which indicate the exact dimensions, weight in the assembly and the permissible power of the outboard motor. boat-engine And you should not ignore the recommendations for maximum loading, because exceeding the limit can lead to loss of stability.
| Model | Length, m | Width, m. | Load capacity, kg | Engine power, hp |
|---|---|---|---|---|
| Roger 280 | 2.80 | 1.40 | 350 | 5-8 |
| Roger 320 | 3.20 | 1.50 | 450 | 9.9 |
| Roger 360 | 3.60 | 1.65 | 600 | 15-18 |
| Roger 420 | 4.20 | 1.80 | 800 | 25-30 |
Features of the transpant design
Roger's boat trawler is made of high-density moisture-resistant plywood and is coated with special sliding paint, which provides moisture protection and makes it easier to install the motor. The transom design is designed to transmit traction without deformation, even when operated for long periods at high speeds.
Materials and production technologies
The quality of the final product depends on the raw materials used in its manufacture. PVC materialIt's a multilayered fabric made up of multiple layers of polyvinyl chloride and a reinforcement mesh, which gives it high tensile strength and abrasion resistance.
The process of gluing parts is carried out using two-component polyurethane glue, which creates a seam that is not inferior in strength to the material itself. Unlike cheap analogues, where seams can be unstuck under the influence of temperature changes, the technology of hot vulcanization or high-quality cold gluing, used by Roger, ensures the durability of the product. Seam tightness It is tested at every stage of production.
An important aspect is the fittings: valves, handles, rings and ducks for mounting cans, all of which must be securely secured and made of materials that are not susceptible to corrosion. kevlar or additional layers of PVC, which is especially important for the bottoms and nasal parts.
- 🧪 Use of five-layer reinforced PVC density from 750 to 1100 g/sq.m.
- 🔥 The use of heat-resistant adhesives that withstand extreme temperatures.
- 🛡️ Installation of reinforced stainless steel fittings and durable plastic.
- 🌊 Treatment of seams with special compositions to prevent stratification.
⚠️ Note: Do not use high pressure compressors without pressure gauge control for pumping a boat, as in the sun the pressure inside the cylinders increases and may exceed the permissible norms.
To extend the life of the boat after each operation, be sure to wash it with fresh water and dry it completely before packaging, especially if used in salt water.
Package and additional options
Roger's standard boats usually include the boat itself, removable jars, pump, remix and packing bag. However, the official website offers a wide range of additional options to allow the customize vessel to suit itself. nose-curlThis greatly simplifies packaging and reduces the dimensions in folded form.
For fishermen and hunters, installation will be an important addition. floating-floor Or using plywood slats coated with anti-slip coatings, and there's also the option of mounting under the sounder, rod holders and anchor lines, all of which are integrated into the structure without breaking the tightness of the cylinders.
The standard variants are made of dense fabric, but you can order reinforced covers with wheels if you want, which greatly facilitates the transportation of the heavy kit to the launching site. Choosing the right equipment is a balance between functionality and weight of the equipment.
☑️ Checking of completeness upon receipt
Care, maintenance and storage
In order to PVC It has been in the service of many years, and you need to observe simple rules of operation and storage. Regular cleaning of dirt, sand and silt prevents mechanical damage to the material. After every fishing or walk, it is recommended to rinse the boat with clean water and wipe with a soft sponge, avoiding the use of aggressive chemical solvents.
Store the product should be spread out or half-folded in a dry room at a temperature of -20 to +40 degrees Celsius. Long-term storage in a compressed state can lead to the appearance of cracks on materials and deformation of seams. Periodically, once a season, it is recommended to pump the cylinders to working pressure and check them for leaks with soap solution.
If you find minor damage, do not panic. The kit that comes with everything you need to quickly eliminate punctures. The main thing is to thoroughly degrease and dry the damage before applying the glue. For serious damage, you should contact a specialized service, whose contacts can also be found on the official website.
- 💧 Wash the boat with fresh water after each release.
- 🌬️ Complete drying before packaging to avoid mold.
- 🧴 Use of special means for the care of PVC (spray protectors).
- 📦 Storage in a case away from direct sunlight and heating appliances.
⚠️ Warning: Never leave a fully pumped boat in direct sunlight for long periods unattended, as this can cause the seams to rupture due to air expansion.
Compliance with storage rules and regular care increase the service life of the PVC boat by 2-3 times, preserving its appearance and technical specifications.
Frequently Asked Questions (FAQ)
What is the warranty period for the boat manufacturer Roger?
The official warranty period for materials and seams is 12 to 36 months, depending on the model and operating conditions, and the full information is contained in the warranty card, which is included in the kit for each product.
Can I use a PVC boat in the winter?
Materials used in the production of boats Roger, retain elasticity at low temperatures, but operation requires special care. It is not recommended to throw a frozen boat, bend it at negative temperatures and dramatically change the temperature regime (implement from the cold to the heat).
How to choose the right engine power for a particular model?
The specifications of each model indicate the maximum value of engine power. Exceeding this limit is strictly forbidden, as this can lead to the destruction of the transom and loss of control. For glides with full load, it is recommended to choose a motor that is 70-80% of the maximum allowed power.
Is it possible to order a boat of non-standard color?
The manufacturer periodically releases limited editions in various color solutions. The possibility of individual color ordering depends on the current production program and the availability of materials.
How to keep a boat in winter
The ideal place for winter storage is a heated room, and if this is not possible, you can store it in a garage or barn, hanging the boat in a half-blown state or putting it on a flat surface, avoiding contact with sharp objects and rodents.