Hunting for large breams from a swimming facility opens up opportunities for fishermen that are not available in coastal fishing. Using a montage known as "eggs" allows you to effectively catch bed brows and deep pits where trophy specimens feed. Bottom fishing Using such specific equipment requires precise tuning and understanding of the behavior of the fish in the current.
The essence of the method is a sliding boat that moves freely along the fishing line without scaring the fish when biting. PVC boatsAnd this is where every piece of equipment is important for a successful outcome, and unlike the hard-to-find installations, here the fish picks up the nozzle confidently, without feeling the resistance of the load.
Breath is a cautious and schooling fish, so the right approach to choosing the place and time of getting on the water is critical. The key to success is finding depth differencesIt's where the current creates natural forage tables, and it's where egg mounting is most effective, allowing the angler to control the fishing process and quickly change the wiring horizon.
Design and advantages of mounting "Eggs"
The tool, called the egg, is a modernized version of bottom gear, where the load is performed by an egg-shaped lead body, and this geometry is not accidental: it provides a stable position at the bottom even in strong currents, preventing the fishing line from twisting. Sliding load It is the heart of this system, allowing the fishing line to pass freely through its body when the fish jerks.
The main advantage of this design over classic feeders or deaf divers is to minimize the resistance when pecking. Bream, trying the nozzle, does not feel the weight of lead, which greatly increases the number of bites realized. In addition, the egg-shaped form contributes to self-cutting in rare cases, but most often the angler controls the moment of the cut, which makes fishing more athletic.
Importantly, the installation allows you to use different types of leashes and hooks depending on the conditions of the reservoir. You can quickly replace the leash group if the nature of the stick has changed or a different nozzle is required, which makes the gear versatile and adaptable to any fishing conditions from the board.
⚠️ Attention: When assembling installation, monitor the quality of the vertebrae and carbines. Cheap fittings can cause a trophy to break at the most critical moment, especially when catching large fish from the boat.
For the manufacture of the main line, it is recommended to use high-quality fluorocarbon The diameter of the main line is usually from 0.25 to 0.35 mm, which allows you to confidently feel the bottom and control the tackle at depths up to 10-12 meters. Thinner lines can get confused in a strong current, and thick ones can sail, taking the tooling from the stained spot.
Required tackle and boat selection
The success of fishing depends on the right set of equipment, and the fishing for eggs from a boat does not require the ultra-long rods used in coastal fishing, the optimal choice will be short fishing rods, from 1.2 to 2.0 meters in length. rod convenient to use in a limited space of the boat and allow you to accurately carry out the tackle.
When choosing a boat, you should consider its stability and carrying capacity. Metal boats such as Kazanka or Volzhanka have excellent stability, but can be noisy when the tackle comes into contact with the sides. PVC boats quieter and more comfortable, but require more careful handling of hooks, so as not to damage the cylinders.
- 🎣 rod: a short onboard form with a test of up to 60-80 grams, allowing you to throw the tooling with your hand or a short swing.
- 🧶 Coil: reliable non-inertial model size 3000-4000 with good line laying and friction brake.
- ⚓ Anchor system: two anchors for mounting a boat stretching across the current, which ensures a stable position.
- 📡 Echo sounder: an instrument for finding relief and monitoring the position of the boat relative to the brow.
The coil should have a smooth course and a high-quality forest-layer, since the catching often occurs in conditions of constant tension of the line. The use of multiplier coils is also possible, especially if you are used to their ergonomics, but de-inertia are more popular due to the ease of resetting the line.
Boat installation technique and anchoring
The right way to set the boat is to make it a good way to go fishing, and you need to lock it across the stream so that it fits in a feeding plume, and you use two anchor stretching, one upstream, one downstream, or you use a two-anchor system that diverges at an angle.
The ideal position is achieved when the bow of the boat is facing against the current and the stern is slightly shifted, allowing the fishing rods to lie comfortably on board. anchorage were of sufficient length (at least triple depth at the point of catch) and did not sag too much, otherwise the boat would be blown by the wind or current.
Using a sonar during installation allows you to visually monitor the bottom relief and adjust the position of the anchors. You should see a clear brow or dump on the screen where you plan to catch. If the boat is carrying, you need to add weight to the anchors or change the angle of installation.
☑️ Checking before fishing starts
And you have to consider that when you're fishing on a strong current, the boat can turn around a little bit, and in this case, the length of the nasal or feeding tile helps, and the stability of the platform is critical, because even a slight shift can carry the tooling out of the concentration zone of the fish.
The process of feeding and searching for fish
The search for perspective points begins long before the tackle is thrown, the Bream prefers to stay on the border of calm water and current, often occupying the lower side of the channel, using the sonar you need to find the differences in depths, pits, snags or simply inhomogeneities of the bottom relief.
Once a potentially interesting location is discovered, a feeding is done, using dump truck feeders or large bait balls that are delivered exactly to the fishing point. bait-mix It should be heavy to quickly reach the bottom and not blur in the upper layers of water.
| The bait component | Function | Example of use |
|---|---|---|
| Cooked millet | The basis, the creation of mass | Basic filler for flow |
| Sunflower cake | Flavoring | Attracts fish with smell |
| river-ground | Weighting | Blurring the ball at the bottom without popping up |
| Moth/snub | Taste. | Encourages fish to eat |
In the process of fishing, you need to regularly throw small portions of bait to maintain the interest of the fish, but not overfeed it. The frequency of feeding depends on the strength of the flow and the activity of the bream: the stronger the flow, the more often you need to feed so that the plume does not interrupt.
⚠️ Warning: Don't use too light bait fractions in the strong current. They will be carried away by the stream, taking the fish away from your tooling, which will make fishing meaningless.
Fishing and wiring equipment
Egg fishing from a boat is technically easier than shore fishing, but requires constant control of the tackle. After throwing (or lowering the tackle with the hand), the loader lies on the bottom, and the fishing line is pulled by the current. The fishing rod is installed on the shield holder or held in the hand.
The wiring here is passive, and the current is playing with the nozzle itself, lifting it up and lowering it, but the angler can use light animations, slightly raising the tip of the rod to provoke the rod. blush The key is not to make sudden movements that might alert the fish.
The bream's sticking on this tooling often looks like a confident nod or a fishing line, and you should cut it broadly, but without fanaticism, so as not to tear the fish's lip, and you can force it to avoid getting into the driftwood or under the boat.
Wiring secrets
Experienced anglers often use the demolition game, and by slightly relaxing the line, they allow the current to carry the tool down the stream, and then sharply select the slack, which mimics the movement of the feed object and provokes predatory or peaceful fish to attack.
It is important to make sure that the fishing line is always in a strained state, sagging signals either a change in the terrain or that the loader is stuck in the grass, constant tactile contact with the tooling is the key to timely cut-off.
Typical mistakes and expert advice
Beginner anglers often make mistakes that negate all efforts. One of the most common is the use of too rough tackle; bream, especially in clear water, can ignore thick leashes; the other extreme is overly thin fishing lines that can not withstand the load when getting off the boat.
Also a common problem is the wrong fishing point, where fishermen often look for fish on a flat table, while breams prefer to stand at the eyebrow, waiting for the current to bring food, and the lack of sounder in this case makes it very difficult to act at random.
- 🌊 Do not ignore the strength of the current: if the tooling is demolished, increase the weight of the cargo or change the angle of installation of the boat.
- 🐟 Adapt the size of the hook: too large a hook can scare away a cautious fish, too small - do not detect a large one.
- ⏳ Patience: Bream can take a long time to try the nozzle without swallowing it. Don't rush the cut at the first points.
Use leashes of different lengths (from 10 to 50 cm) depending on the activity of the fish. During periods of passive pecking, the lengthening of the leash often gives a positive result, allowing the nozzle to float more freely in the stream.
Keep in mind safety on the water. Catching from a boat, especially on the current and with heavy loaders, requires concentration and compliance, always carry a life jacket and the minimum necessary equipment for emergencies.
The secret to success is a combination of fine-tuning the stern stream and fine-tuning the gear sensitivity, and the bream will not forgive rudeness, but will reward delicacy generously.
Frequently Asked Questions (FAQ)
What weight of the load of "eggs" is optimal for a strong current?
For a strong current, the optimal weight of 60 to 100 grams. The exact weight is selected experimentally: the tooling should lie on the bottom, but with a slight jerk break and roll, which prevents getting stuck in the bottom debris.
Can I catch eggs from an inflatable boat?
In fact, inflatable boats are preferred because of their quietness, but you have to be very careful with hooks to avoid piercing cylinders. You're recommended to use soft netting pads.
Which nozzle works best for a bream?
The classic and most effective option is a bundle of dung worm or worm, and sandwiches (worm + worm, barley + worm) work well, and in some water bodies, bream prefers plant nozzles, such as mastyrka or canned corn.
Do I need a nod on the rod?
The use of a nod is highly desirable, it serves as an indicator of pecking and helps to control the position of the loader at the bottom, a hard nod better conveys a bite on the flow, a soft one in standing water.