Fishing on high-flowing rivers has always been considered the domain of experienced anglers who can read water and understand the behavior of bottom fish. However, the classic shore feeder often has limitations: the casting distance may be insufficient, and the bottom relief hidden behind the brow. The use of a boat radically changes the approach, allowing you to catch inaccessible for the shore areas of the bed where large fish most often roll in search of for food.
Boat Fishing on the current is not just a replacement of the casting site, but a completely different philosophy that requires specific equipment and anchoring skills. Unlike standing water, flow strength is the main factor, which dictates the choice of feeders, the length of leashes and even the way the boat is fixed. The right position allows you to deliver the bait point to the "table" where the fish feels safe, which greatly improves the performance.
Many anglers underestimate the importance of flow training by relying on standard installations. hydrodynamics And in this article, we're going to take a look at all the nuances, from anchor selection to feeding, so that you can make your fishing on the river as productive and safe as possible.
Advantages and Features of Catching from a Boat
The main advantage of fishing from a boat is that it allows you to position accurately. On the shore, you often depend on bushes, the relief of the coastline and the range of throwing, whereas the boat allows you to stand exactly above the top of the boat. forward-looking This is especially true on large rivers, where the fairway can be located 50-100 meters from the shore, where it is difficult to get a light feeder.
And the boat also allows you to use shorter rods, which is much more convenient in a limited space, so you don't have to make sweeping throws, risking catching bushes or entangled gear, just put the tooling in the water and put the line to the desired tension. Vertical feeding The feeder provides perfect accuracy of getting into the fed spot, which is almost impossible to achieve when casting from the shore at an angle.
But there are challenges, and the main one is the need for a reliable anchor, the boat can be blown by the wind or by the current, which will cause the fishing point to shift and the gear to become entangled, and it is also important to consider the echoes and vibrations that frighten fish in shallow water. quietness And proper anchoring becomes critical to success.
Selection of tackles and equipment for flow
The boat gear is very different from the shore gear, especially the rod. For comfortable fishing from the side, the optimal length of the form is 1.8 to 2.4 meters. Longer sticks will simply interfere by clinging to the sides or tooling. The rod test should match the weight of the feeders you plan to use on this current, usually in the range of 80 to 150 grams.
The coil is better to choose the size of 3000-4000 according to Shimano classification with good traction and high-quality friction. thread-cordBecause the monophilic line in the course is very much sailing, creating an arc that prevents you from seeing the bites and doing the cuts, and the tiles have minimal water resistance and excellent sensitivity.
Special attention should be paid to feeders. For strong currents, flat-bottom models and ground-grazing models are ideal, as well as bullet feeders that are better at keeping the bottom, the weight of the feeder is selected experimentally: it should lie on the bottom, but not be too heavy to drown in the mud.
- 🎣 feedergam - a mandatory element in the tooling, quenching the jerks of the fish and preventing the break of a thin leash short.
- 🎣 Paternoster Gardner Loop or Gardner Loop are the most popular installations that provide high sensitivity and self-shooting.
- 🎣 online - installation, where the line passes through the feeder, is less prone to entanglement when vertically lowered.
⚠️ Note: When fishing from a boat, avoid using too long leashes (more than 1 meter), since when the gear is vertically located, they will get confused around the main line and feeder.
Use fluorescent line for leashes – on the course, the fish often attacks the tool from the bottom up, and a bright line can provoke more bites, especially in muddy water.
Anchoring and Positioning at a Point
The right boat is 90 percent of the success of all fishing, and you can't stand across the stream, because the boat will turn around, making sail and noise. counter-current Or the nose/feed, but with two anchors, and most often, the "stretch" scheme is used, where one anchor is in the nose and the other in the stern, which rigidly fixes the craft.
For feeder fishing, it's important that the boat stays out of the way. If you stand up against the current, you'll have to throw (or lower) gear over the side, which is uncomfortable. The optimal way to stand up is to bring down the boat, but the anchors hold it in place, and you sit back to the current or sideways, controlling the tackle. The anchor flaps should be 3-4 times as deep as the fishing site.
It's important to consider the bottom, and if you stand on a slope, the boat can start to slide. anchor-ring Or special devices for rapid change of anchors, and also remember about the sonar, which will help to find not only fish, but also a smooth spot for installation.
☑️ Checking before anchoring
Feeding and feeding tactics
Boat feeding has its own specifics. Because the fishing point is right below you, you don't have to do long-distance feedings. The feeding ground goes vertically, and the main task is to create a dense feeding spot on the bottom that won't wash away. heavy And sticky.
Weights must be added to the mixture: clay, soil from the shore or special binders. A clean cracker or pellets will instantly blow away with a stream of water, and the fish will go downstream, ignoring your nozzle. The start feed is made with a large feeder or hand (if the depth allows and there is no strong demolition), pouring 5-10 feeders at one point.
In the process of fishing, the rate of feeding depends on the activity of the fish. In the strong current, the feeder is empty at the bottom, sharply pulling the rod. This creates a plume that stretches along the bottom, attracting the fish from a distance. It is important not to overfeed the fish, so the volume of the feeder for feeding can be reduced by leaving only a fragrant base.
| Component | Function | Example |
|---|---|---|
| Basis | Creating volume and mud | Breadcrumb, ground baked biscuit |
| binder | Holding the mixture at the bottom | Clay, oatmeal, gluten |
| Faction | Keeping fish at a point | Boiled millet, barley, chopped worm |
| Scent | Recruitment from a distance | Melassa, hemp oil, liquids |
The secret ingredient for bream
Add to the bait a little ground seeds of hemp or flax - their oiliness creates a long-playing plume, which laziness feels hundreds of meters even on a strong current.
Fish search and relief reading
The success of fishing from a boat on the current depends on how well you choose a place. Don't get up at random. Use a sonar or a method of "probing" the bottom. You should be interested in the differences in depths, the exits from the pits, the bed brows and the boundaries of fast and quiet flow. This is where the fish saves energy, waiting for a swim for food.
Often large individuals are not on the fastest flow, but behind obstacles (stones, snags), where they are formed. flip-back The boat allows you to go up to these places and gently apply the gear, but be careful: there is a high risk of hooks in the snag, so the supply of feeders should be solid.
If you don't know a river, start by looking for changes in water color or flow rate. The edge of the jet is always a potential fish dining room. Move around the water area, taking 10-15 minutes per point. No bites for more than 20 minutes with the right tactics suggests that the point needs to be changed.
⚠️ Warning: When approaching fish places on a boat, try not to make noise. Hitting cheers, falling objects to the bottom and loud conversations can scare off cautious fish for a long time, especially in shallow water.
The key to success is mobility, and the main advantage of the boat is that it can change seats quickly if the stick stops, without collecting long gear or cruising for miles on the shore.
Fishing technique and safety
The fishing line has its own specifications: because the fishing line is stretched by the current, the cutting should be sharp, but not sweeping, so as not to tear the lip of the fish or confuse the gear against the side. After the cutting, it is important to immediately set the direction, taking the fish away from possible hooks and, most importantly, from anchor ropes.
Large fish (bream, carp) cannot be dragged overboard, which can cause the boat to roll and even tip over, especially on a PVC membrane. Use a long-handled lift. Pull the fish to the surface, let it take a breath of air to calm down, and then start the net.
Safety on the water is paramount. Even if you're a great swimmer, a life jacket is a must. The flow can be insidious, and getting tangled in a fishing line or anchor veil is a matter of seconds. Always carry a knife to cut the cord emergency.
- 🛡️ Save the vest It should be worn, not just in a backpack.
- 🛡️ Knife Available with one hand to cut the entangled wicker.
- 🛡️ Anchor falla - must be fixed so that when a sharp jerk boat does not wind on the foot.
Remember, fishing from a boat requires constant concentration not only on fishing, but also on the environment, and watch for other vessels, weather changes and water levels.
Which rod is better to choose for a beginner?
For a beginner fishing, mastering fishing from a boat, the best choice will be a feeder length of 2.1-2.4 meters with a test up to 100-120 grams. This length is universal: it allows you to comfortably manage the gear in the limited space of the boat and, if necessary, make throws from the shore.
Why does the fish bite but not catch?
Most often, the reason lies in too long a leash or incorrect consistency of the bait, during the long leash can move away from the feeder, and the fish, coming to the table, does not find the hook, also try to reduce the size of the hook or change the color of the nozzle.
Can I catch from a boat in the prohibition of spawning?
The rules of fishing in different regions may differ, but, as a rule, during the period of spawning prohibition fishing from boats on waters where fish spawn is completely prohibited, regardless of gear. Be sure to check the current terms and restrictions in the local rules of GIMS before leaving.
How to keep a boat on a strong current without anchor?
Without anchor, it's almost impossible to keep the boat on a point on a strong current. In extreme cases, if the bottom is rocky and the anchor is not holding, you can use a stretch scheme between two shore landmarks (trees, bushes), if the width of the river allows, but this is less reliable and safe than classical anchoring.