Boat Fishing opens up horizons for the fisherman, inaccessible to the coast, the ability to stand over a hole where a pike stands, or to find a bream joint on a deep plateau is the main trump card of the boater. Fishing for the entrance in this context acts as one of the most extractive methods, allowing you to catch vast areas of the bottom without constant movement.
Unlike the classic bottom slinging, where the tackle is static, the slinging involves a human being being actively involved in the wiring process, so you don't just drop the loader and wait, but you slowly drag the gear behind you, playing with baits in the bottom layer, and this requires a certain skill and understanding of the behavior of the fish.
The essence of the method is that the angler is in a boat that drifts in the wind or current, or slowly moves on the minimum gas. Working line It's a very long, long, bait-like approach that allows the baits to pass over the bottom at a natural fish pace, and it often brings trophies where normal spinning is powerless.
Design features of tackle for boat fishing
The basic element is a powerful rod. Since the fishing is carried out from the side, the length of the whip is not decisive, but its test must be solid.1.8-2.1 m) and rigid forms capable of withstanding the jerks of large fish and the load of long line. Coil is chosen reliable, preferably with a bytranner or flag brake, as the bite can be taken by surprise.
The main line should be strong and minimally stretchable. 0.35-0.45 mm Or a wicker cord with a burst load of at least 10 kg is the best choice. The wicker gives better sensitivity, but the monophile is more comfortable in the hand when sampling manually, if the angler prefers to work without a coil. loader Weight from 50 to 200 grams, depending on the strength of the current.
The key is leashing, and on the main line, above the loader, you make loops or you put up vertebrae to attach the leashes, and they range from 3 to 10 pieces. Leads. They're made from thinner fishing lines or fluorocarbon to minimize visibility, and the length of the leashes also plays a role: the longer they are, the looser the nozzle plays in the water flow.
- 🎣 The basis of the tackle is a durable cord or line up to 100 meters long, wound on a coil or coil.
- ⚖️ The groove is selected drop-shaped or pear-shaped, so that less clings to the bottom relief.
- 🔗 The use of vertebrae is mandatory to prevent twisting of the tackle when the hooks are rotated.
Installation of equipment: schemes and options
There are several installation schemes, each with its own advantages depending on the fishing conditions. garlandIn this embodiment, the leashes are attached directly to the main line at regular intervals, the distance between them is usually from 1 to 2 meters, this tool is effective in catching schooling fish, for example, bream or cache.
The second option is the use jack-thorn This allows the leashes to be spread sideways, preventing them from overcooking, and this is especially true in the course of fishing, where the flow of water can entangle thin threads, and it's made from elastic wire or hard fishing line. Balance is critical: too hard leads can alert cautious fish, and too soft leads to confusion.
The third option is sliding, where the groove moves on a separate branch or main line, and the leashes are fixed higher, which allows the fish to feel less resistance to the load when grazing. For bottom fishing from a boat, combined options are often used, where the bottom hooks are equipped with feeders-springs, and the top ones work as bottom tackle.
⚠️ Attention: When installing a large number of hooks, make sure that the lower leashes do not drag along the bottom before the loader. This will lead to permanent hooks. The optimal length of the lower leash is 20-30 cm.
☑️ Checking installation before going to water
Selection of craft and anchor system
Fishing for a boat requires that it be stable and wide enough for the angler to work comfortably with a long line without getting confused. PVC Boats With perimeter inflatable tubes, they are perfect: they are soft, they are not tackled, and they have excellent stability. Metal boats ("Kazanki", "collarboats") are also suitable, but require more care when working with a thin line at the side.
The issue of anchoring is acute. Classical fishing for admission is often carried out "for demolition." The boat is not placed on a rigid anchor, but is allowed to drift slowly in the wind or current. water-anchor It's a parachute that creates resistance to water, and it allows you to keep the gear tight and control the wiring horizon.
If you're fishing in a strong current or wind where the drift is too fast, you use a combination method, you put the boat on a light anchor in the stretch marks, adjusting the length of the ropes to set the right angle of demolition, and it's important that the boat doesn't prowl from side to side, otherwise the gear will be constantly confused.
| Type of boat | Advantages of admission | Deficiencies | Recommended length |
|---|---|---|---|
| flat-bottomed PVC | High stability, soft sides | Sailing in the wind | 3.2. - 3.8 m |
| Aluminum (Kazanka) | Durability, ability to install a rigid chair | Hard sides (risk of line trimming) | 3.0 - 4.0 m |
| inflatable floor | Comfort, softness, lightness | Less rigidity of construction | 2.8. - 3.4 m |
Tactics of fish search and wiring
Success in catching a boat depends on finding a fish spot, and from a boat, it's easiest to do it with a sonar, and you need to find the eyebrows, the dumps, the pit boundaries, or the local highlands (buckle belly buttons). Wiring The boat is carried out as follows: the boat moves slowly, and the angler sets the line, controlling the bottom touch by the loader.
The ideal wiring is when the loader occasionally (periodically) scratches the bottom, lifting a cloud of mud, and the leashes with the nozzle float a little higher. If the loader is constantly hanging in the water, it is too light or the boat is going too fast. If the loader is dead, you need to immediately ease the tension or add speed to tear it from the bottom, otherwise the loss of the gear is inevitable.
Fan tactics are often used, and the boat is driven over a promising area several times from different directions, which allows you to catch different horizons and find active fish. catching horizon You can change by letting go of the line further or choosing it, thereby raising or lowering the entire garland of hooks.
The secret of wiring on weak current
If there's no current at all, use your oars to create artificial demolition, paddle slowly and evenly, mimicking drift, which will revive the baits and provoke the predator to attack.
The bait and nozzle: what works best
When fishing for a bait, bait plays a secondary role, because the gear covers a large area, but creating a stern plume can significantly increase the number of bites, using dump truck feeders attached to the main line above the loader, or throwing bait balls upstream from the boat.
The whole range of fishing treats is used as nozzles. For peaceful fish (bream, gustera, blue) it is worm (dung or crawl), squirrel, barley, peas and dough, often planted with stockings or bundles to create a bulky and smelly bait, and for predators (perch, perch) hooks are planted with bait, dead fish, silicone vibrating tails or shell flesh.
It's important to experiment with sandwiches. The combination of a worm and a worm, or a barley with a foam ball, often works better than a monotonous nozzle. The foam, by the way, helps to lift the hook above the bottom, making it more visible to fish in murky water.
- 🪱 Dung worm is a universal nozzle that attracts both peaceful and predatory fish with its smell.
- 🌽 Steamed corn and peas are effective in catching large bream and carp on a strong current.
- 🐟 The bait (top, sticker) is mandatory for catching a pike and a bearsh for admission.
⚠️ Warning: When using bait, place it gently, behind the back or lip, so that it remains mobile for as long as possible. Dead bait attracts fish worse, but can also work by perch.
Fishing technique and safety
Getting fish off the boat to the entrance is delicate, because there are many hooks and the fishing line is long, there is a risk of confusing the tackle or getting hurt, usually with a wide swing of the hand, feeling the weight at the other end, if a large fish has sat down, you should not drag it "ahead"; it is better to take a few meters of fishing line, let the fish gulp air, and then smoothly pull it up.
Be careful about safety, and when you're in a boat with long lines and lots of hooks, it's easy to get caught with your clothes or your hand. yawner And it's also a hook extractor, and it's also a wire cutter, and if the hook is deep, it's sometimes safer to cut off the leash than to torture the fish and risk injury.
Keep in mind the weather conditions. Wind and wave can quickly turn comfortable fishing into a challenge. Watch the forecast and always have a spare anchor. Life jacket A must-have element of equipment, especially when fishing alone.
Use gloves with cropped fingers when working with a fishing line, this will protect your hands from cuts with a thin braid and burns during rapid etching, while maintaining the sensitivity of your fingers.
The main safety principle is that you should never wind a fishing line on your hand or finger, and if a large fish jerks, it can cause serious injuries or even loss of a limb.
Frequently Asked Questions (FAQ)
How long should the main fishing line be for fishing from a boat?
The optimal length of the fishing line is from 50 to 100 meters, which allows you to catch long distances in one swim and have room for maneuver when catching or avoiding obstacles.
Can I catch the engine on the go?
Yes, this method is called "track" or trolling on bottom tackle, but the speed of movement must be minimal (no more than 2-3 km / h) so that the gear does not fly to the surface and the load does not detach from the bottom.
How to avoid overhang of leashes?
Use hard leads (gows), make sure that the line is evenly drawn, and do not allow the gear to sag, and also helps using a fishing line with memory (hard), which in the water straightens.
Which fish is best caught on the entrance?
The main prey is the packing species: bream, gustera, blue, caches, white-eyed, and the predator is also successfully caught on the entrance: perch, perch, berch and mould, if you use the appropriate nozzles.