The water element offers fishing opportunities that are not available from shore, allowing fishing for remote brows, flooded snags and deep pits. Using a PVC (polyvinyl chloride) boat provides a tremendous advantage in mobility, but requires a review of familiar coastal tactics. Boat fishing It is radically different from coastal fishing, since here not only the skill of the cut-off plays a key role, but also the ability to anchor correctly without creating unnecessary noise.
Unlike shore fishing, where the angler is tied to a single point, the floating platform allows you to instantly change the location when you are stuck or not. flyboat It has a high sailability and sensitivity to wind, which makes its own adjustments to the installation process of tackle. In this article, we will discuss the nuances of equipment, the choice of anchor system and fishing techniques that will turn your foray into an effective hunt for trophies.
The main enemy of the floater on the water is not the absence of fish, but the wrong balance of the boat and the lack of anchor stretching. Many beginners make the mistake of trying to catch from the board, which often leads to a tipping over with a sharp jerk of a large fish or a gust of wind. Safety on the water is achieved only by the correct seating of the cargo and the use of two anchors. Understanding the physics of boat behavior on the water is the first step to successful fishing.
Selection and preparation of floating craft
For comfortable fishing with a float fishing rod, the size of the boat is critical. Too small "pot" will not allow you to accommodate the necessary number of gear, bucket with bait and cages without disturbing the centering. The optimal solution for single fishing is considered models with a length of 2.8 to 3.2 meters. These dimensions provide sufficient stability and allow you to conveniently sit with the rod without disturbing the rower if you are fishing together.
The most important element of the preparation is the installation anchor-ringThe regular anchorages are often inconvenient for the fisherman, so experienced boaters install additional rings in the bow and aft parts of the cylinders, which allows you to create a stretch, fixing the boat strictly perpendicular or parallel to the flow, which is necessary for accurate wiring of the tooling.
The interior space also requires organization. The use of a rigid floorboards (plywood or aluminum) is preferable to an inflatable one, since it allows you to kneel more confidently when catching and does not create the effect of a "tampoline" that tires the legs.
- 🛶 Dimensions: The length of 2.8-3.6 m provides a balance between maneuverability and gear space.
- ⚓ Fixtures: The presence of a minimum of 4 rim rings (2 nose, 2 feeds) is mandatory for anchor stretching.
- 🪵 Paul: Hard floorboard (plywood/aluminum) gives a stable platform for mounting racks under the fishing rods.
- 🎒 Ergonomics: The presence of a transom bag or pockets in cylinders for storing small inventory at hand.
⚠️ Attention: Never attach anchor rings directly to the handles for carrying the boat. When strong tension is in the current or wind, the handle can come off with part of the valve, which will lead to depressurization of the cylinder and an emergency situation.
Anchor system: the basis of stable fishing
Floating requires the boat to be completely immobile relative to the bottom. Any shift in the boat leads to the demolition of the float, changes in the depth of the fishing and, as a result, to the descent of the fish or entanglement of the equipment. The classic cat anchor, which often comes with boats, is ineffective here: it does not hold well on soft ground and can get stuck in driftwoods. For fishing, it is better to use anchors such as the cat. Grapple. or denforthThey have their feet and they are buried in the ground.
The key is the length of the anchor tile, which should be at least three depths at the fishing site, ideally five depths, which provides a gentle angle of tension, allowing the anchor's legs to cling securely to the bottom. Using a chain weighing 1-2 kg between the anchor and the rope also improves efficiency by pressing the tile to the bottom and extinguishing the boat's thrust.
The two anchors are used to hold the boat in position, one anchor is attached to the nose ring, the other anchor is attached to the stern ring, and by pulling both the floes, the angler turns the boat sideways or nose to the current, which is most convenient for throwing. Anchor stretch It allows you to stay in a fed point even in a strong side wind.
☑️ Checking the anchor system
Equipment and ergonomics of the workplace
The comfort of the fisherman directly affects concentration and result. Sitting on an inflated cylinder is uncomfortable and harmful to the spine, so having a full-fledged seat with a hard back or a special fishing chair attached to the floorboard is necessary. It is important that the fisherman's legs have a focus, which is especially important when catching, when you need to apply force without risking falling overboard.
The boat's gear is a matter of safety and speed, and the fishing rods don't just have to be on the bottom where you can step on them, but the ideal solution is a special rack that attaches to the thongs or sides of the boat, and they allow you to keep the rod in a combat position, freeing your hands to work with bait or a lift.
Special attention is required to place the cage, which must be fastened so that it can be quickly immersed in water to release the fish and just as quickly removed without getting out of the place. Often the cage is tied to a stern ring or a special loop on the transom, making sure that the rope does not get confused in the propeller of the motor, if it is installed.
| Equipment element | Recommended solution | Benefits of fishing |
|---|---|---|
| Sitting | Soft coated and backed | Reduces fatigue during many hours of fishing |
| The rod-holders | Metal/plastic per transom | Fixing tackle, free hands |
| Platform | Hard floorboard (plywood/aluminum) | Sustainability, possibility of installation of equipment |
| Zewner/Extractor | On a neck or belt lace | Instant access to release the hook |
Techniques of fishing in wiring from a boat
Boat Fishing allows you to use technique wire The idea is that the bait tool floats along the stream, mimicking live feed, while the boat anchors, and the angler lets go of the fishing line, controlling the float over the fed table.
This requires a longer rod than the shore, usually 5-6 meters, and allows you to wiring further away from the side, where the fish feels safer, and the depth of the descent is adjusted so that the hook with the nozzle goes 2-5 cm from the bottom, periodically touching it.
An important aspect is feeding, and from the boat, the bait is thrown upstream from the float, creating a plume that leads the fish directly to the hook. Using dump truck feeders or slingshots allows the mixture to be delivered exactly to the point without the unnecessary noise of a splash that can scare away careful bream or carp.
- 🎣 Length of the rod: 5-6 meters allow you to do wiring away from the board, frightening fish.
- 🌊 Depth of catch: Adjustment of the descent taking into account the bottom relief and the current strength.
- 🍞 Feeding: Point casting upstream to create a stern plume.
- 👀 Control: Visual control of a float at a long distance requires good optics or binoculars.
Safety and behaviour at water
Fishing is a recreation, but water does not forgive carelessness. The basic rule of the boater and the fisherman is that everyone is in the boat. lifejacketEven if you're a great swimmer, an accidental rod hit when you're cut, a hook or a sharp roll of a boat can cause you to lose consciousness or cramp. The vest should be zipped up at all times, not in your bag.
Weather conditions dictate their rules. Be sure to check the forecast before you get on the water. Winds, even seemingly weak on shore, in open water can quickly intensify and create a dangerous wave. For inflatable boats, the height of the wave is critical: if it begins to overwhelm the board, fishing must immediately stop and move to shore.
Special attention should be paid to interaction with other participants in the movement. A boat with fishermen is a slow-moving object. When meeting with fast boats or boats, you should take a position perpendicular to the wave to avoid tipping over, and fishing in the fairway and on the navigable canals is also prohibited.
⚠️ Attention: It is strictly forbidden to get up in a PVC boat while fishing, even in complete calm. A sharp movement, a gust of wind or a blow from a large fish can shift the center of gravity, which will lead to a flip. All manipulations with the tackle are performed sitting.
Seasonal features and choice of gear
Depending on the season, not only do fish preferences change, but also gear requirements change. In spring, when the water is still cold and clear, the fish are careful and stand at depth. It requires a thin line, delicate tooling and long cast. In summer, during the flowering season, the fish come closer to the shore and the boat, but become more discerning in the bait.
Autumn fishing from boats is often targeted at predators or large breams that go into wintering pits, requiring stronger rods and fishing lines that can withstand the resistance of trophy fish. Winter fishing from boats is only possible during open water periods in late autumn, but requires insulation and special safety measures due to the risk of icing cylinders.
The universal solution for boat fishing is the use of telescopic rods with rings and an inertial coil, which allows you to quickly change the fishing horizon, quickly respond to changes in depth and catch fish at the expense of friction, which is especially important when there is no solid ground under the boat to stop.
Which fishing line is better to choose for fishing from a boat?
For fishing from a boat, it is optimal to use a monophilic fishing line with a diameter of 0.18-0.22 mm. It has good stretchability, which cushions the jerks of the fish and softens the impacts on the side of the boat. The wicker cord is less preferable for float fishing from a boat because of its rigidity and lack of stretching, which can lead to the fish descending with a sharp jerk when the angler does not have the opportunity to take a step back, as on shore.
Do I need a motor permit for this fishing?
If your PVC boat is powered by a motor of less than 8 hp (or 5 hp depending on current GIMS regulations and the region) and the vessel is less than 3 meters long, registration and rights may not be required. However, the presence of a life jacket, scoop and anchor with a flap is mandatory for any boat. Always check the current GIMS rules before getting on the water.
What if the boat started to be demolished with an anchor?
If the anchor is not holding and the boat drags along the bottom, you need to immediately add a second anchor or increase the length of the fail. If this does not help, you should carefully move to shallow water or to the shore. Under no circumstances do not try to cut the fail with a knife if the boat is inflated - a sharp release from tension can lead to the anchor hitting the side and damage to PVC.