The use of rubber-shocked bottom gear, popularly known as rubber, has traditionally been associated with shore fishing, where cargo is delivered by swimming or thrown by hand. squirt It opens up a whole new horizon for the fisherman, allowing him to catch hard-to-reach areas, deep pits and distant brows, where it is physically impossible to get from the shore, combining the advantages of a stationary dunk and the mobility of a boat, providing high efficiency in hunting large bream, perch and carp.
The main difference is the way the cargo unit is delivered and the ability to quickly change the gear during the day, and from the boat anglers can position the hooks precisely above specific points of relief, which is critical for effective fishing. shock-absorbing allow the use of thinner fishing lines and graceful hooks, as rubber extinguishes the jerks of large fish and the sailing flow, making the tackle less noticeable to the cautious predator.
It is important to understand that the management of such gear from a swimming tool requires certain skills and strict adherence to safety, since tight rubber has tremendous energy. cargo-block Or a sharp relaxation of tension can lead to entanglement of the line or even injury. In this article, we will discuss in detail all the nuances of equipment, installation and angling tactics, so that your fishing is not only successful but also safe.
Advantages and features of fishing from the boat
The main advantage of using a boat when fishing for a dunk rubber band is the ability to install the gear at a considerable distance from the shore, where large trophies are often fed. Unlike the coastal version, where the length of the rubber is limited by the throwing capabilities, you can bring cargo from the boat to a distance of 50, 70 or more meters, creating a large trophies. perfect angle of attack This is especially true in water bodies with steep shores or overgrown shallow waters, where depth is only accessible by water.
Another important aspect is the possibility of using longer working sections of the line. Rubber shock absorber The boat can be much more powerful and longer, allowing you to use a large number of leashes, increasing the area of catch, and the angler gets the opportunity not just to wait for a bite, but actively look for fish, rearranging the gear depending on the activity of the stick and changes in weather conditions.
⚠️ Attention: When fishing from a boat, the load on the rubber shock absorber increases due to wind and wave effects on the craft. Always use a margin of safety of at least 30-40% of the designed load to avoid breaking the gear at the most inopportune time.
Mobility is a key success factor. If you're strapped to a single point on the shore, you can react quickly from the boat to the fish's exit, and if you find a cauldron or bursts of activity on the side, you can quickly lift the gear, move and anchor again in a new perspective location. Tactical flexibility This approach often yields much better results than passive waiting in one place.
Design of tackle: the choice of rubber and loader
The basis of successful fishing is a well-assembled tooling, where each element is selected according to the conditions of the reservoir and the estimated size of the trophies. rubberFor fishing from a boat, it is recommended to use round-section rubber with a diameter of 3.5-4 mm, since square rubber wears out faster and has a lower tensile coefficient.
The calculation of the length of the rubber insert is made by the formula: the length of the working section of the line is divided by the tensile coefficient of a particular rubber (usually 3-5). For boat fishing, compound rubber bands are often used, connecting several pieces through the cock-cord or special connectors to achieve the required length without loss of elasticity.
- 🎣 GRUZILO: For fishing from a boat, the weight of the cargo must be significantly greater than for coastal fishing to withstand rubber thrust and wind. The optimal weight is from 1.5 to 3 kg, the shape is flat with soil hooks.
- 🎣 Main line: Use a monofill with a diameter of 0.35-0.45 mm or a low-extensibility wicker cord for better bite transfer, but be sure to put a rubber shock absorber.
- 🎣 Leads: Leash length varies from 20 to 50 cm depending on the activity of the fish and the strength of the current, the material is fluorocarbon or soft monolesc.
The attachment of the load to the rubber should be as reliable as possible. Often a scheme is used where the rubber is tied to a capron cord, which in turn is attached to the load, which allows you to replace the ragged rubber without lifting the heavy load from the depths. Helicopters Carbines should be of high quality, made of stainless steel to avoid corrosion and sudden breaks.
Installation of the working part and the lead unit
The gear's working part, or "bet," is mounted on the main line between the rubber shock absorber and the motor-swinger. This is where the hooks are located, and the number of bites sold depends on the quality of the installation. The fishing from the boat is characterized by longer bets, sometimes up to 10-15 meters, which allows you to cover a larger area of the bottom. Distance between leashes It should exceed the length of the leash itself to avoid overlapping during exhaustion.
The best way to fix the leashes to the main line is by looping or using miniature vertebrae, the second option is preferable for boat fishing, since it allows you to quickly change tactics, replacing the leashes with different hooks or nozzles directly on the water. Main line in the place of fastening the leashes should be stretched, for which wire stretch marks or rigid inserts are often used.
| Type of fish | № hook (in Russian Federation) | Leash diameter (mm) | Type of nozzle |
|---|---|---|---|
| Carp | 5-7 | 0.16 - 0.18 | Bag, dough, barley. |
| Breeze | 6-8 | 0.20 - 0.22 | Worm, sandwich |
| Sudak | 1-3 (offset) | 0.25 - 0.30 | Silicone, bait. |
| Pike. | 1/0 - 3/0 | 0.35 + string | Cut, jelly. |
Special attention should be paid to fixing the leashes during transportation. On the boat, the gear is subjected to constant vibration and pitching, so the hooks should not be loosely dangled. Cambrian Or a special pocket on a motor-swing to fix sharp stings, which will prevent entanglement of the gear and protect the angler from accidental injections.
☑️ Checking the gear before getting on the water
Installation technique and anchoring of the boat
The process of installing gear from a boat is radically different from the coastal version and requires coordinated action, especially if you are fishing together. anchorageThe boat must be kept strictly in the wind or current so that the gear lies flat rather than describing the arc around the boat, often using two anchors to stretch the boat in the right direction.
The delivery is carried out on a separate line that is tied to the cargo, and the rubber is in the boat at this moment in a coiled bay or on a special motor-swing, one angler smoothly pits the rubber, ensuring that the turns do not overlap, the second one controls the boat and releases the cargo. Delivery speed It should be uniform, without jerks, so that the rubber falls into the water naturally.
Once the load has touched the bottom, you need to give it time to silt, and then start sampling the working part for hooking. The tension of the rubber band is regulated by the length of the main line, which is fixed on the onboard motor-village. It is important that the tension angle is comfortable for cutting, but not too steep, otherwise when pecking the large fish will feel strong resistance.
⚠️ Warning: Never wind tight rubber over your hand or fingers! When the tackle breaks or slips, the compressive energy can cause serious brush injuries or line cuts. Use only wooden or plastic rods.
To fix the boat at the fishing point, it is recommended to use an anchor cord with a margin of length equal to 2-3 depths at the fishing site, which will allow the boat to remain within the "corridor" outlined by stretching rubber, even when the wind direction changes. Floating anchorThe mount from the bow of the boat will help stabilize its position relative to the tackle.
Tactics of fishing and the choice of promising places
Boat fishing allows you to use active fish-finding tactics, and instead of waiting for hours for a pack to approach one point, the angler can methodically comb through the water area, and the most effective way to place the gear is to cross the beam or along the vegetation border. Bottom relief plays a key role: sharp dumps, entrances to pits and local elevations (navels) are favorite places of bream and perch parking.
Boat gum is rarely used because of the difficulty of getting to the fishing point without scaring the fish, but dump truck feeders attached to the main line between the load and the first hooks can significantly increase catchability. Flavoring The slack becomes even more important in this case.
- 🌊 Time of day: At depth from the boat, fish often take around the clock, but the best results are observed on the spots and at night, when large fish go out to feed on relatively small areas.
- 🌊 Depth of catch: The optimal range for a rubber band from a boat is 2 to 6 meters. At great depths, it is difficult to control the gear, and in shallow waters there is a high risk of entanglement.
- 🌊 Weather conditions: Wind and wave can make fishing difficult, but a slight excitement often activates the peck, saturating the water with oxygen and making the fish less careful.
The secret of night fishing
For night fishing from boat to rubber band, use glowing beads or chemical fireflies attached to the forearm hook or just above the leash, which will help the fish find the nozzle faster in the dark and increase the number of bites realized.
Safety and precautions on the water
Boat fishing, especially with high-power rubber shock absorbers, is a potentially dangerous recreation, and the main danger lies in the rubber itself: when under tension, it is a compressed spring. When a fishing line breaks or slides off the motif, the end of the rubber band can hit with great force. safety-glasses This is a requirement for everyone on the boat.
Also, you need to monitor the stability of the boat. Sharp jerks of large fish or active fishing can lead to the roll of the boat, especially if it is a narrow Kazanka or light PVC boat without a hard bottom. Always position yourself so that when you jerk the gear does not lose balance. Life jacket It should be worn by every fisherman, regardless of his ability to swim.
Special attention should be paid to the condition of the gear before each fishing. Rubbing on rubber, cracks on the loader or worn-out knots are a direct road to loss of gear and possible injuries. Regularly conduct equipment audits and without pity replace questionable items. Security The trophy should always be a priority.
Frequently Asked Questions (FAQ)
Which tire is better to choose for fishing from a boat: round or square?
Round rubber (aviation rubber) is definitely better for fishing from a boat, it is more durable, less prone to twisting and has a more predictable tensile coefficient. Square rubber ages faster in the sun and can be stratified on the edges with frequent stretches, which is dangerous when working with heavy loads.
Can I catch a rubber band alone from a boat?
Teh