Skills of spinning fishing from a boat

Fishing with a swimming aid opens up completely different horizons for the fisherman, which are not available in coastal fishing. Spinning riders are able to explore deep-sea brows, river beds and far-shore trunks, where trophy predatory fish often hide, but this approach requires not only specific gear, but also special skills in boat management and understanding of hydrodynamics.

Unlike the shore, where the angler is tied to the topography, the boat is the perfect position to throw at any angle. jig-bait Or, you know, you know, you know, you know, you know, you know, you know, you know, you know, you know, you know, you know, you know, you know, you know, you know, you know, you know, you know, you know, you know, you know, you know, you know, you know, you know, you know, you know, you know, you know, you know, you know, you know, you know, you know, you know, you're a great boat, you know, you know, you know, you know, you know, you know, you know, you know, you know, you know, you know, you know, you know, you know, you know, you know, you know, you know?

But the current or wind fishing is a little bit of a game, and you have to take into account the demolition of the boat, you have to choose the right anchor system, and you have to monitor the sounder all the time, and it's a holistic approach to training and technology that allows you to fish sustainably even in difficult conditions.

Advantages and Features of Boat Fishing

The main advantage of fishing from a boat is the mobility and accessibility of hard-to-reach places, and the angler can quickly move from shallow water to depth, investigate local anomalies of the bottom and respond quickly to changes in the stick. predatoryIt can migrate through the water during the day.

And it's also much easier to do wiring from the boat that's technically impossible from the shore, like demolition fishing or wiring a wobbler strictly against the current at great depths, and you can keep the bait in the working area as long as possible, catching every square meter of the prospective site.

But there are some things that you can't ignore, because the wind and the current create additional noise and vibration that can alert the fish. electric motor Or competent work with anchors becomes not just a convenience, but a necessity for success.

• 🚤 Capability of fishing at depths of over 5-7 meters, inaccessible to coastal spinning.
• 🎣 Precise control over the bait wiring due to the possibility of changing the angle of throw.
• 🗺️ Mobility: Quick fish search and changing fishing horizons without long transitions.

⚠️ Warning: When fishing in windy weather in open water, always watch the direction of drift so as not to get too close to the fairway or dangerous hydraulic structures.

Selection and preparation of craft

For spinning fishing, different types of boats are suitable, but the most popular are: PVC models PVC boats are valued for their ease of transport and disassembly, which is convenient when going fishing in a passenger car. Aluminum provides greater durability and resistance to sharp objects at the bottom.

The key choice is platform stability. Spinning riders often have to make sudden movements, get on board or actively work with a rod; narrow and unstable boats can cause falls into the water or loss of expensive equipment. anchorage.

Special attention should be paid to the configuration: the presence of comfortable seats, rods for storing gear and installation capabilities troll-engine The boat should be equipped with reliable railings and comfortable handles for embarkation and disembarkation.

Recommended Boat Lifting Capacity = (Fisher's Weight + Motor Weight + Equipment Weight) * 1.2

Safety should not be ignored; life jackets should always be worn, regardless of swimming skills; cold water and heavy clothing can play a cruel joke in an emergency.

• ✅ PVC boats: light, quiet, easy to transport, but require drying.
• ⚓ Aluminum boats: durable, stable, not afraid of sharp stones, but heavier in transportation.
• 🛟 Having a hard bottom (sleigh, floorboard) is critical for stability when fishing standing.

⚠️ Warning: Never exceed the maximum load specified by the manufacturer in the boat’s passport, especially when the water is turbulent.

Navigation and sounder: eyes of the fisherman

Modern boat fishing is unthinkable without a sonar, and this instrument allows you not only to see the depth, but also to distinguish between the structure of the bottom, the presence of vegetation and the accumulation of fish. Two-beam models are the basic standard, but for serious fishing it is better to use devices with technology DownVision or SideVision.

Sound sounder tuning is an art. Sensitivity and range must be adjusted to see fine details, but not to get porridge from noise. It's important to learn to distinguish between signals from hard bottoms, silt, driftwoods and fish. An experienced spinner reads the sounder like a book, knowing where to throw.

In addition to sonar, GPS is an indispensable tool, which allows you to save the coordinates of the catch points and tracks of the path traveled, and this is especially important when fishing in large water areas, where visually finding a small eyebrow or navel is almost impossible.

Type of instrument	Substantive function	What a spinning driver needs
Sonar sonar	Measuring depth, finding fish	Determination of the bottom relief and the presence of a predator in the water column
GPS-navigator	Geopositioning	Save points, lay the route, return to the place
Carplotter	Combination of sonar and GPS	Integrated navigation and fish search (the most convenient option)
Temperature sensor	Water temperature measurement	Definition of thermoclines, where fish often stand

Properly mounting sensors on the boat also plays a role: the sonar sensor must be submerged deep enough in water to avoid the formation of air bubbles underneath, which create interference. The fastening must be rigid so that the vibration of the motor does not distort the picture.

Anchor system and boat control

Anchoring is a basic skill of a boater, and spinning is most often done with a two-anchor scheme (forward and aft), which allows you to lock the boat side or nose to the current and wind, which provides a stable position for wiring the bait.

The best-proven anchors are Cat or Grapple because of their compactness and good engagement, the weight of the anchor is chosen depending on depth, current strength and wind load. For shallow depths and weak currents, 1.5-2 kg are sufficient, at depth and flow the weight can reach 5-7 kg.

Modern fishermen are increasingly using anchor-off The uncoupling allows the anchor to be released if it's stuck in a snag, without approaching the boat and without risking overturning, and the electric winch anchor allows you to quickly raise and lower the anchor, save power and time.

When fishing on a strong current, it's important to position the boat correctly, if you stand across the current, the boat will be heavily demolished, and the wiring will become uncontrollable, the optimal way to stand up against the current using a motor to correct position, or use a "stretching" scheme for two anchors.

• ⚓ Use synthetic phala (nylon, polypropylene) - it does not rot and is pleasant to the touch.
• 🌊 On a strong current, put the boat nose against the flow for better handling.
• 🛑 Always have a spare anchor or a way to replace it in case of a shattered shaft.

⚠️ Warning: Never tie the anchor shaft to the transom or the boat elements without the possibility of a quick break or uncoupling – this can lead to the boat tipping over when the anchor is stuck.

Search tactics and wiring technique from the board

The tactics of hunting predators from a boat are very different from the coastal one, and it's a fan or a comb, and you get up to a point and you make fan-like rounds, you catch sector after sector, and if you don't bite, you move a few meters and you repeat the process.

When fishing jig It's important to consider the angle of entry of the line from the boat, and when you're vertical (the boat is above the eyebrow), the cut can be inefficient, so you often have to move upstream to get the wiring to go at an angle, so that the hook can be reliably cut through, and the wiring can be classic stepwise or more aggressive, with long pauses.

For wobler fishing (twisting, trolling), the boat gives you the ability to keep the bait in the right horizon. When twidding from the boat, the amplitude of the jerks may be smaller, but the frequency is higher. It is important to control the swelling, especially on the current, where the flow can push the wobler to the surface or, conversely, to tighten deeper.

Trolling is a separate type of fishing, only possible from a motorized boat, which allows you to quickly survey large areas and find active fish. Speed, length of fishing line and depth of immersion are key parameters that vary depending on the conditions and type of fish.

• 🎣 Fan casts allow you to catch the entire accessible area without moving the boat.
• 🌬️ In high winds, use an anchor sail to slow down demolition and stabilize the boat.
• 🐟 Change the wiring horizon: if there is no stick at the bottom, try to bait into the floes.

Safety and equipment of the spinning rider

Water safety is priority number one, and besides the life jacket, a first aid kit, communications equipment (pressurized phone, radio) and a supply of drinking water are required. The weather in large bodies of water changes rapidly, and the presence of raincoats or thermal clothing can save you from hypothermia.

The spinning equipment should be functional, with lots of pockets for small things, reliable fasteners, moisture-repellent materials, and shoes should have a non-slip sole, as the side of the boat is often wet and slippery from mucus or algae.

Don't forget to protect yourself from the sun and insects. In open water, ultraviolet radiation is enhanced by reflection from the surface of the water. Polarization glasses not only protect your eyes, but also allow you to see fish and bait in the water, removing glare.

It is also important to monitor the condition of the gears: spare lines, hooks, winding rings should be at hand, loss of a trophy due to an unbending hook or a rubbed fishing line on a boat is especially offensive, since the possibility of replacing the tackle is less than at home.

Element of equipment	Appointment	Importance
Life jacket	Keeping afloat	Critical (Required)
Polarization glasses	Eye protection, water view	High.
germ-o-o-o-o-	Protecting things from water	High.
Grainworm and extractor	Safe extraction of hooks	Medium (for large fish)

Frequently Asked Questions (FAQ)

Which motor is better to choose for a spinning boat: gasoline or electric?

For active spinning fishing, especially in shallow waters or in places where motors are prohibited, is ideal. electric motorIt's silent, it doesn't scare fish, it allows you to maneuver accurately, and it's a gasoline engine that's needed for long-distance fast and strong-current fishing, but it's noisier and requires more maintenance.

Do I need a special permit to catch from a boat?

Yes, the swimmer must be registered with the GIMS (if its weight with an engine exceeds 200 kg or the engine power is more than 8 hp, the rules may change, clarify the current norms).

What length of spinning is best used from a boat?

The optimal length of the spinning for a boat is from 1.8 to 2.4 meters. Longer rods (2.7 m and above) are inconvenient to use due to limited space, the risk of catching tackles overboard or getting tangled in cords. Short rods (Short rods).ultralight) are also good for accurate work.

What if the boat started to blow away during fishing?

If the anchor is not holding or not, use a drift anchor, which inhibits demolition. If that doesn't work, try to stand on two anchors. In extreme cases, stop fishing and wait out the weather in a protected place or on shore.

Can I catch spinning from an inflatable boat in winter?

Yes, but only if the boat is intended for winter operation (use special frost-resistant materials, for example, the use of the same type of equipment). Hypalon Or PVC reinforced with special additives. Conventional summer boats in the cold become fragile and can burst, and special safety measures and equipment are also required.