Traditionally, Mormose is associated with winter ice fishing, where every gram of bait weight and millimeter of nod are crucial, but the transition to open water opens up a whole new horizon for fans of this tool, allowing them to catch areas of the reservoir that are inaccessible to the shoreline. Mormyshing from the boat This is not just an analogue of winter fishing in the summer, but a separate, technically complex and incredibly extractive type of outdoor activities that require a specific approach to the configuration of the boat.
The main advantage of this fishing is the mobility and the possibility of vertical or sheer flare at depths where the fish feels safe. Using the boat, you can point to explore the bottom relief, dumps, brows and local drifters, taking the predator from depths of 5, 10 and even 15 meters, where a conventional float fishing rod simply does not reach. echoer In conjunction with the GPS-navigator becomes your main ally, allowing you to visualize the fish and the structure of the bottom in real time.
Unlike spinning, where the bait often flies in an arc and is difficult to control on the current, the sea turtle when caught from the side allows you to keep the line in a strictly vertical position, this ensures maximum sensitivity to the most timid bites of the pike, perch or bear. tackle And competent search tactics turn this process into an exciting hunt, where the result directly depends on the skills of the angler, not on luck.
Selection of craft and stability requirements
The basis of successful fishing is a sustainable platform. Because mormyshing involves working with thin lines and light baits, even a small swing of the boat can completely ruin the game and make wiring impossible. PVC boats with an inflatable floor (NDND) or a rigid floorboard coating, which provides a flat surface and additional rigidity of the structure.
The width of the cylinders is critical: narrow rowing boats will not fit here, because the slightest shift in the center of gravity will lead to a strong roll. The optimal width of the cockpit should allow the angler to sit comfortably on a transom jar or a special chair without touching the side with a fishing rod. In addition, the boat must have sufficient carrying capacity to accommodate the battery, sonar and anchor system.
- 🛶 NDND (inflatable floor of low pressure): Provides excellent hydrodynamics and flat floor, which is convenient for placing equipment, but requires careful drying after fishing.
- 🪵 Pillet boat: Hard aluminum or plywood floor gives maximum stability when drilling holes or working with gear, but collects water and is heavier in transportation.
- ⚓ Anchor system: The presence of two anchors (on the nose and on the stern) or the use of the anchor node "Siberian pendulum" is mandatory for fixing the boat above the fishing point.
⚠️ Attention: Never try to fish with a mormy while standing in a narrow boat without a wide cockpit. A sharp jerk of a large fish or a hook on a snag at depth can lead to loss of balance and overturning of the boat.
An important aspect is the material of the bottom. For fishing in tight areas, where you often have to work in plumb, it is better to choose models with enhanced puncture protection. PVC boats With a tissue density of at least 750 g/sq.m., they have proven to be a reliable option that can withstand contact with shells and sharp branches, and you should also pay attention to the availability of convenient handles for carrying and mounting for rod holders.
Set of tackles: fishing rods, reels and nods
Summer mormyshing equipment from a boat is radically different from winter, and it does not require an ultra-light balalaika, as fishing takes place in more comfortable conditions, and depths require a more powerful and reliable tool, the main requirement is the rigidity of the whiplash and the reliability of the coil, which must withstand the load when catching fish from a depth of 10-15 meters.
The best choice will be specialized extension-box For sheer flare length from 50 to 70 cm Longer whips are uncomfortable in the limited space of the boat, especially if it is two people. the coil should be open type, with a diameter of 80-100 mm, with a good rattle brake to set the line when the big fish jerks.
Nod is the heart of tackle. Summer fishing uses tougher options than winter, as a Mormose can weigh as much as 20 to 40 grams, and the current often makes adjustments. Nod materials range from metal plates to lausanne and capron ribbons. The main thing is to adjust the nod to a specific bait weight so that it bends about 30-45 degrees under load.
- 🎣 Trick: Length 50-70 cm, fiberglass or graphite whip, open coil "Nevskaya" or specialized marine.
- 📏 Kiwok: Lausanne or metal, 15-20 cm long, adjustable by rigidity.
- 🧵 Leska: Monophilic, with a diameter of 0.16-0.22 mm, preferably with low extensibility and fluorescent for visibility.
⚠️ Attention: The use of a wicker cord (plait) when fishing for a snail from a boat is not recommended. The snail has no extensibility, which when playing heavy bait at depth leads to frequent fish descents and breaks when hooked, and it is also very confused in the wind.
For storage of gear and rapid change of mormy, it is convenient to use organizers attached to the boat, which allows you not to waste time finding the right bait in the box, but to quickly respond to changes in the behavior of the fish. Winter fishing rods They can only be used as a backup or for fishing small fish in shallow water, but for serious fishing they are too fragile.
Use carbine buckles at the end of the line, which allows you to change the mormies in 5 seconds without cutting the line and tying the knots, which is critical when you often change baits in search of the working horizon.
Choice of Mormies: weight, shape and color
The summer mormy is basically a heavy jig head or a tungsten cast with a hook. The weight of the bait is chosen empirically: it should be such that you feel the touch of the bottom, but it still has the ability to play. At depths up to 5 meters and no current, weights work 5-10 grams, at depths 10-15 meters and if there is a current, the weight can reach 30-50 grams.
The shape of the body affects the nature of the game and the vibrations that are created. Classical forms such as the "split", "drop" or "Ural" create some vibrations, while elongated "ants" or "drabs" - others. For catching a predator (pusher, perch) often use mormice with soldered or suspended hooks equipped with Cambrians, beads or woolen threads.
| Type of phony | Weight (gram) | Depth of fishing | Fishing object |
|---|---|---|---|
| Tungsten crusher | 5 - 15 | 2 - 6 m | Perch, roach, bream |
| Lead Goat. | 10 - 25 | 4 - 10 m | Breath, gustera, scoundrel |
| Composite "Devil" | 15 - 40 | 5 - 15 m | Sudak, big perch |
| Stupid bunny | 20 - 50 | 6 - 20 m | Sudak, bersch, pour. |
The color of the bait matters, especially in clear water or when fishing for passive fish. In sunny weather and shallow waters, dark colors (black, dark green, "oil") work better, which create a clear silhouette. At depth, in dusk or in murky water, light, fluorescent colors, and lures with elements are effective. phosphorusThey are lights that are light and light in the dark.
The Mormos are special, with additional movable elements, chains, beads, petals, which create additional noise and visual effects, attracting the attention of a predator from a long distance. Experiments with the color of the hook and the color of the body of the Mormose often provide the key to the capricious bite.
The secret of tungsten mormy
Tungsten mormys, at the same size, are much heavier than lead ones, which allows the use of miniature baits at great depths, which is especially true when catching a cautious perch that is afraid of large objects.
Tactics of search and work with sonar
Boat mooring is an active search, and it's not customary to sit at one point for hours, like catching a bream on a ring, and your job is to find a fish's parking lot or migration path. sounder With good detail and a GPS module, modern two-beam and three-beam sensors allow you to see not only the bottom relief, but also individual schools of fish, as well as the structure of underwater vegetation.
The search process begins with a elevation study, and you're interested in the extremes of depth, the brows, the dumps, the exits to the tables and the local elevations (navels), and when you find a perspective point on the sonar screen, you need to anchor upstream or use a system of two anchors for rigid fixation.
The algorithm of work on the point is as follows:
- 👀 Visual control: Watch the sounder screen while waiting for fish to appear in the work area.
- 🎮 Game: Lower the mormy to the bottom and start wiring, changing the amplitude and frequency of vibrations.
- 📍 Fixing: If a bite occurs, immediately put a dot in the navigator to be able to come back here again.
Fish are often not at the bottom, but in the water. The sounder helps to determine this horizon. If you see a fish 2 meters above the bottom, it makes no sense to tap a Mormouse on the ground - lower the bait to this level. GPS tracker allows you to return to the verified points with accuracy to a meter, which is especially important when fishing on trails.
⚠️ Attention: When you're working with a sonar, remember that the radiation cone is wide, and the fish you see on the edges of the screen may not be under the boat, but on the side, so you can bring the boat in so that the target is strictly under the sensor before you start fishing.
Wiring technique and bait animation
The technique of fishing from a boat differs from the winter one in that you are not limited to the hole and can use wider ranges of movements. The main task is to give a sea turtle life by simulating the movement of a stern object. There are many options for wiring, but the basic ones are several basic types.
The classic wiring is to smoothly lift the bait from the bottom with the nod wobbling. The amplitude can be from 1 to 10 cm, the frequency is from 1 to 3 vibrations per second. For every 10-20 cm of climb, you should pause. It is at pause when the Mormose is planning down, most often the predator attack.
Another effective method is to push the bottom, and you tap a little bit on the ground, raise a cloud of muti, then you do a sharp swing and a smooth lowering, and it works perfectly on the perch and perch, and stepwiring is also effective: a few strokes at the bottom, then a sharp rise by a meter and a series of short trembling movements.
☑️ Basic wiring algorithm
It's important to experiment with tempo. One day, the fish reacts to a frenzied game, the other day, they prefer a barely noticeable movement of the bait. Animation. You have to be different, you have to change the angle of the rod, the speed of the lift, the length of the pauses, the hand is relaxed, the movements are smooth, but confident.
Features of fishing for different types of fish
Each type of fish has its own preferences in the choice of mormy and the tactics of its supply. Sudak It's a classic mormyshing object, which prefers vertical components, taps on the bottom and pauses, uses narrow, elongated mormyshkins ("douchers"), often with phosphorus coating, and is caught on deep dumps and watering.
Perch He's more aggressive and responsive to active play. He likes mormy sticks with red cambricks on hooks and frequent, short strokes. Often, bass can be lifted from deep into the top water if you set the pace right. Striped robbers are effective mormy fly and compound baits.
Bream and gustera These fish often peck on the smooth rise of the bottom-feededed mormy, the mormy is used large, but with a soft game, often the bream attacks the bait when it lies motionless on the bottom or slowly surfaces after knocking.
There is no universal recipe: the key to success is to constantly experiment with wiring and catching horizons. If there is no cool on the bottom, check the middle layers of water; if fast play does not work, switch to smooth.
Safety and equipment of fishermen
Boat Fishing, especially with heavy gear and deep-sea areas, requires strict safety regulations, and first of all, everyone in the boat must have a life jacket, which is not a formality, but a necessity, since losing balance with a fishing rod in the hands can lead to falling into the water.
Clothing should be comfortable, not restrictive of movement, but protect against wind and moisture. Even on a hot day on the water you can quickly freeze in the wind, so the presence of a raincoat or windbreaker is mandatory. Shoes should be non-slip, with a white sole, so as not to soil the bottom of the boat and provide good grip.
Don't forget to protect yourself from the sun. The reflection from the water increases the impact of ultraviolet light, so a headdress with fields and sunglasses (preferably polarized) are mandatory elements of equipment. Polarization not only protects the eyes, but also allows you to see through the surface of the water, noticing fish and obstacles.
What weight mormy to choose for the flow?
Weight depends on the strength of the current and the depth. The formula is simple: 1 meter of low current depth requires about 10 grams of weight. If the current is strong, the weight is increased by 1.5-2 times. The main condition is that the Mormomy must confidently hold the vertical, but not lie dead weight on the bottom, allowing you to break away.
Can you catch a mormy from a boat together?
Yes, it's possible, but it requires coordination, the boat has to be wide enough so that the fishing rods don't get confused, and often the tactics are when one angler catches a plumb at the side, and the other one catches a spinning or a retractable leash, and it's important to agree on safety rules so that you don't cut each other off.
Do you need a nod if there's a sonar?
Nod is always needed, regardless of the sounder. The sounder shows the fish and the relief, but does not pass a bite. The nod is a signal that detects the fish touching the bait. Without it, you simply will not notice how the predator carefully picked up the Mormose, especially at the depths.