Choosing a swimming aid for fishing or outdoor activities on the water is often a challenge for the beginner and pro. The market offers dozens of brands, but monsoon The vessels have proven themselves as reliable assistants in small and medium-sized water bodies, allowing you to reach the most cherished fish places.
Unlike heavy metal products, the PVC It is easy to transport in the trunk of a car, but behind the ease of assembly there are many technical nuances that must be considered before buying. In this article, we will discuss in detail the features of the design, compare popular modifications and give expert advice on how to care for your new purchase.
A well-chosen vessel is a guarantee of safety and comfort on the water, and we will look at why this brand has been a leader in the budget and mid-size segment for many years, and learn how to make the right choice of size and capacity so that your vacation is not overshadowed by unpleasant surprises.
Features of design and materials of production
The basis of durability of any inflatable vessel is the quality of the material used. monsoon Traditionally made from five-layer reinforced PVC fabricThis material is resistant to gasoline, oils, ultraviolet radiation and temperature changes, which are critical for operation in the Russian climate.
The design of the bottom can be made in two main versions: low-pressure inflatable floor (LDP) or hard plywood / aluminum floorboard. NDMA They provide excellent cruising and comfort, as the bottom takes a streamlined shape under water pressure, and the hard floor, in turn, gives stability when cruising, but increases weight and build time.
⚠️ Attention! When choosing a model with hard floorboard, be sure to check the quality of the processing of the plywood edges. Inadequate impregnation or sharp edges can damage the inner surface of the cylinders during active use.
An important element of safety is the availability of submergedEven if one cylinder is damaged, the vessel will remain afloat, allowing it to reach the shore safely, and the seams are sealed by hot gluing, which makes the joint stronger than the material itself.
- 🛡️ Five-layer high-density reinforced PVC
- ⚓ Reinforced timber for protection against isthires
- 🌊 Cone-shaped floods to improve hydrodynamics
- 🔒 Reliable valves of the frog or petal type
It is worth noting that the geometry of the cylinders monsoon It's designed to minimize water resistance, and it allows lower power motors to be used without losing speed, which saves fuel and engine resources.
Comparative analysis of popular models
The manufacturer's lineup covers a wide range of needs, from single pleasure options to serious two-to-three-seat trophy fishing vessels. monsoon It is for you, you need to compare their key specifications.
The Compact series is focused on rowing and low-power electric motors, they are lightweight and maneuverable, the Profi and Trophy series are equipped with a reinforced transcenza that can withstand powerful gasoline engines, and have a large payload.
Below is a table that helps you quickly navigate the differences between the major modifications presented on the market.
| Model | Length (cm) | Width (cm) | Load capacity (kg) | Recommended motor (hp) |
|---|---|---|---|---|
| monsoon-2 | 220 | 115 | 220 | Rowing / 1.5 |
| monsoon-2.9 | 290 | 136 | 350 | 2.5 - 5 |
| monsoon-3.2 | 320 | 145 | 450 | 5 - 9.8 |
| monsoon-3.6 | 360 | 160 | 600 | 9.8 - 15 |
When choosing between 3.2 and 3.6 meters, the longer version will provide comfort for two full-equipment adult fishermen, but will require a more powerful engine to plane.
Technical specifications and load capacity
Passport loading capacity It's not just a number, it's a calculated safety parameter, and it includes the weight of the passengers, the equipment, the motor and the battery, and exceeding that limit leads to lower altitude and loss of stability.
For comfortable fishing with a outboard motor, the best choice is a model length of 320 cm It provides sufficient internal volume to accommodate with fishing rods, sonar and anchor, without disturbing the centering.
When calculating the load, always leave a margin of 15-20% of the maximum load capacity, which will ensure better swelling and buoyancy in an emergency.
It is important to consider the weight of the transom The hinged transom, which is characteristic of some budget modifications, has engine power limitations, and the built-in rigid transom pasted into cylinders, withstands high loads and vibrations.
The volume of cylinders has a direct impact on stability. monsoon less tilt when moving a fisherman on the cockpit, which is especially important when catching large fish or catching standing.
- 🎣 The optimal length for two - from 3.2 meters
- ⚖️ The load capacity increases safety
- 🚀 Hard transom is mandatory for motors more powerful than 5 hp
Package and additional accessories
Basic equipment usually includes the boat itself, a couple of oars, a pump, a remix and a packing bag, but this may not be enough to fully operate, especially if you plan to use attachments.
Among the useful accessories should be highlighted anchorIt's a rod that often comes in a basic kit, but may require replacement with a more reliable one, and an important element is a rod holder that attaches to a balloon or transom.
☑️ Checking the completeness when buying
To protect the bottom from punctures when pulling the boat to the shore, it is recommended to purchase a special one. shield-belt This will extend the life of the PVC fabric, which is the most vulnerable part of the structure.
⚠️ Attention! Do not use household adhesives for repairing PVC. For quality restoration of tightness, a special two-component polyurethane adhesive is necessary, designed specifically for boat materials.
Utilization also depends on the quality of the bag-pack. monsoon They are often equipped with straps, but when fully loaded with heavy models (3.6 m or more), it is better to provide a wheeled platform for transportation.
Rules of assembly and preparation for launching into water
The durability of your boat depends on how you assemble and store it. Pump the cylinders only to the pressure specified in the instructions (usually 0.2-0.25 atm) Pumped in the sun. PVC It can be deformed or burst due to air expansion.
The assembly process should begin with the layout of the boat on a flat surface, clearing the site of sharp objects. The pumping sequence of cylinders is usually not critical, but it is recommended to first shape the bottom, if it is a model of NDNDM, and then the sides.
Sequence of action:1. Spread the boat with the valves up.
2. pump cylinders up to 50% volume.
3. wait 10-15 minutes (thermorstratsion of the material).
4. Reduce to working pressure (0.25 atm).
5. Check the leakproofness with soap solution.
What to do if the boat was in the cold for a long time?
If the boat was stored at negative temperatures, it is strictly forbidden to immediately unfold and pump it, the material becomes brittle, put the package in a warm room and let it warm up for at least 3-4 hours before use.
After each fishing trip, be sure to wash the boat with fresh water, especially if you have been swimming on a salty pond or in a polluted river. The sand and salt act as an abrasive, gradually destroying the protective layer of tissue.
Care, storage and repair DIY
Proper storage is a guarantee that monsoon It's going to last you decades, and you should store it in a deflated state, not folded, but folded, in a dry, cool place, away from the heaters.
Check the valves and joints regularly. Small cuts can be sealed by yourself using patches from the remix, the main thing is to degrease the surface and tightly press the patch, allowing the glue to dry according to the instructions.
- ☀️ Keep in the shade, avoiding direct sun
- 🧼 Wash only with a soft sponge without chemistry
- 🔧 Lubricate valves with silicone lubrication once a season
If you notice a dissection of the cloth or a "hernia" on the cylinder, the operation of the vessel becomes dangerous, in such cases professional repair or replacement of the cylinder is required, since the integrity of the structure is broken.