Finding a reliable fishing boat or family water holiday often leads to a brand that is widely known in the affordable and practical solutions segment. When potential buyers type in the “our boat official” query, they tend to look for confirmed manufacturer information, current catalogs and honest product reviews. In this article, we will examine in detail what the company is, what types of vessels it offers and what to pay special attention to before buying.
The market for inflatable and small aluminum vessels is oversupplied, and record-keeping This is a key tool for weeding out unscrupulous manufacturers, and the brand we're talking about has proven to be a provider of budget solutions, but it's important to understand the difference between marketing promises and the actual technical capabilities of products, and we'll analyze the design, materials and performance so you can make an informed decision.
Particular attention should be paid to the fact that under the general signage often hide different production lines. Inflatable boats and metal boat They require very different approaches to maintenance and have different durability resources, and understanding the specifics of each type will avoid common mistakes when choosing a first or new vessel for your water garage.
Brand history and production capacity
The company, which operates under a brand name that includes many dealers and service centers, began as a local manufacturer, and its main focus was initially on creating affordable and affordable products. rowboat And simple inflatable models for amateur fishermen, and over time, the range has expanded to include more complex inflatable-bottom designs and the possibility of outboard motors.
Today, production is based on the use of modern technologies of welding seams and cutting fabric. PVC The plant's capacity allows for large batches to be produced, which has a positive effect on the final cost of the product for the consumer.
It is important to note that quality control at different assembly stages can vary depending on the particular model. Serial production This means standardizing processes, but manual assembly of individual units is still important, which is why it is recommended to carefully inspect the joints and joints of materials when buying.
⚠️ Warning: When buying, be sure to check the presence of a factory passport and a warranty card with the seller's seal. The absence of these documents may indicate counterfeit products or violation of storage conditions.
The geography of supply covers many regions, which requires boats to be more resilient to extreme temperatures, and the materials are tested for frost resistance, but extreme conditions still require careful treatment. Operation It is possible in winter, but with a number of precautions.
Model range of inflatable vessels
The bulk of sales are inflatable structures, which are divided into several classes by type of bottom and purpose. float-bottom They are low pressure, making them as light and compact as possible, ideal for calm water and fishing from shore or in quiet backwaters.
More advanced versions are equipped with a paiole bottom of waterproof plywood or aluminum. running It allows you to reach higher speeds for an outboard motor, and a hard bottom also allows you to stand on your feet while fishing, which is critical for many anglers.
Separately, it is worth highlighting models with inflatable slackThey're designed to improve stability and protect the bottom from impacts on the bottom of the water body, and the keel makes an inflatable boat a full-fledged small boat that can withstand a little excitement, but they require a more powerful transom motor to go into the plane.
For the convenience of users, we will give a comparative table of the main specifications of popular bottom types:
| Type of bottom | Structure weight | Toughness | Recommended speed |
|---|---|---|---|
| Inflatable (NPD) | Low. | Medium | up to 25 km/h |
| Plywood flooring | Medium. | High. | up to 40 km/h |
| Aluminum leaf | Highly | Maximum | up to 50 km/h |
| Rack flooring | Low. | Low. | 15 km/h |
The choice of the specific modification depends on where you plan to use the vessel. For large reservoirs, hard bottoms are preferred, and for small rivers and lakes, there is enough and more than enough. floor-floorIt is easier to clean and clean after use.
Technical specifications and materials
The key element of any inflatable boat is the material from which the balloon is made. polyvinyl chlorideThe density of this tissue usually varies from 750 to 1100 g/sq.m., which directly affects the resistance to mechanical damage.
Seams are the most vulnerable spot in any inflatable structure, and there are two main methods of joining: gluing and hot welding. Hot welding It's considered more reliable because it creates a monolithic compound that doesn't detach over time, but good glue with two-part glue also provides excellent sealability when the technology is followed.
Furniture also plays an important role in the durability of the product. Cast pens, reinforced transmutation boards and quality valves are the elements that should not be saved. Cheap plastic can burst in the cold or from impact, which will lead to loss of sealing or inability to fix the equipment.
The trans, or trans board, is subjected to maximum loads when driving for an outboard motor, it must be made of high grade moisture-resistant plywood or light alloy, the coating of the transom should protect the tree from rotting and exposure to fuel (combustible mixed materials).
⚠️ Warning: Never leave a boat with an engine installed in direct sunlight for a long time. Heating the transom can lead to deformation of the glue or the wood itself, which will reduce the resource of the unit.
When assessing technical specifications, pay attention to the permissible loading capacityThe actual payload must always be less than the passport to ensure buoyancy and safety on the water, and boat overload is one of the common causes of emergencies.
Aluminum boats and boats
In addition to inflatable counterparts, the brand offers a line of metal vessels, aluminum boats are exceptionally durable and immune to puncture. Aluminum alloysThe corrosion resistance of the products used in production is high, which allows them to be operated even in salt water with proper care.
The design of such vessels often involves a corrugated bottom, which not only increases the hull's rigidity, but also serves as an additional rib of rigidity, allowing for difficult stretches of rivers where an inflatable boat could get damaged. Aluminum motobots Ideal for permanent parking on the water.
The weight of a metal boat is much higher than that of an inflatable boat, which requires a more powerful tractor to transport, but this disadvantage is offset by the possibility of installing more powerful engines and navigation equipment. flat-bar to protect against impacts on the pier.
The maintenance of the aluminum hull is minimal, but mandatory. After each exit into the salt water, you should wash the hull with fresh water. It is also recommended to use antifouling coatings if the boat is standing on the water for a long time to prevent shells and algae from fouling.
Features of welding aluminum boats
Aluminum boats are welded with argon, a complex process that requires special equipment, and at home, repairing holes is almost impossible, so when buying a metal boat, it is important to make sure that there are no hidden defects in the seams.
The choice between an inflatable boat and an aluminum boat often comes down to storage and transportation. If you have a garage or a place by the water, aluminum will be a reliable partner for many years to come. PVC.
Installation and additional equipment
The standard equipment of the boat can vary significantly from dealer to dealer, and the basic kit usually includes the boat itself, the bag-pack, the pump, the remix and the instructions. accessories separately.
Among the most popular additions are anchor systems, inflatable boats weighing up to 200 kg, an anchor weighing 3-4 kg is sufficient. Using an anchor that is too heavy can damage the bottom or cylinders in the sample. anchor-ribswhich must be securely attached to the body.
- 🚣 Oars: in the basic configuration are often aluminum with plastic blades, but for comfort it is better to consider carbon or wooden options.
- ⚓ AnchorIt is recommended to have an anchor of the type “cat” or “Denforth” depending on the type of bottom of the reservoir.
- 🛡️ Protection: cranes (layings on board) will protect the boat from impacts on the pier and sharp stones.
- 💡 LightBattery lights or navigation lights are required to go out into the water at night.
The choice of pump deserves special attention. Mechanical foot pumps, which come with a kit, often require considerable effort. For frequent use, it is recommended to purchase an electric pump with the ability to operate on the battery, which will greatly accelerate the preparation process for the release.
☑️ Checking the completeness before buying
Remember safety equipment. Life jackets should be the size of each passenger, and the presence of a water scoop and end phalt (rope around the perimeter) is also a sign of competent preparation of the vessel for operation.
Operational rules and safety
Safety on the water is not just a formality, it's a necessary condition for survival, and even on a calm lake, the weather can change in minutes. Life jacket It should be worn, not just in a backpack, and this should be an axiom for any water motor.
Before each launch, you should conduct a visual inspection of the vessel, check the pressure in the cylinders, the integrity of the seams and the reliability of the anchoring of the transom. Insufficient pressure on a hot day can lead to rupture of the seams due to air expansion, and excessive pressure can lead to deformation of the structure.
It's important to follow speed and maneuvering rules. Remember that an inflatable boat has sailing speed, and the wind can quickly blow it into the fairway or stones. Management Such a vessel requires certain skills, especially when moving against a wave.
⚠️ Warning: It is strictly forbidden to operate a boat in the presence of damage that may disturb its buoyancy, even a small injury to the cylinder must be eliminated before getting on the water.
Registration in GIMS is mandatory for boats with an engine of more than 8 hp or a length of more than 20 meters (although for small-boats the rule about 8 hp and the weight of a equipped boat up to 200 kg is more relevant).
Tip: Before a long parking on the water (more than 2-3 days), be sure to lift the boat ashore. Prolonged stay in the water leads to fouling of the bottom, swelling of plywood elements and possible damage to the material by microorganisms.
Winter storage requires proper preparation, the boat must be thoroughly washed, dried and folded in a free state, avoiding clamps, it is better to store the product in a warm room, away from heating appliances and direct sunlight.
Comparison with competitors and final choice
There are many analogues on the market, such as Flagship, hunter or BadgerThe products of the brand in question often win in price, but may be inferior as fittings or fabric density in the basic versions.
If you want to be light and compact, inflatable floor models will be out of competition, and if you want to have cross-country capability and a powerful engine, you should look at the floorboard variants or the aluminum counterparts of the competition. Price/quality ratio It's a crucial part of this.
Analysis of feedback from owners shows that the main complaints often concern the quality of the glue or pump as standard, which can be solved by replacing components with better ones, and the housing itself, when used carefully, lasts for years.
The main conclusion: the boats of this brand are an excellent choice for beginners and lovers of periodic trips to nature, subject to careful inspection of the quality of the assembly during the purchase and timely maintenance.
Ultimately, the choice depends on your personal requirements and budget. Our Boats offer a wide range of solutions that allow you to find an option for almost any wallet, the main thing is to approach the purchase consciously, having studied all the specifications and nuances of operation.
Frequently Asked Questions (FAQ)
What is the life of a PVC inflatable boat?
With proper operation, storage and timely repair of minor damage, the life of a quality PVC boat is 10-15 years.
Can I repair the boat by myself?
Yes, small punctures and cuts up to 3-5 cm long can be sealed yourself using a remake kit and a special glue for PVC. More serious damage, especially in the area of seams or keel, it is better to trust professionals in the service center.
Do I need to register a boat with GIMS?
Registration is required if the power of the installed engine exceeds 8 hp (5.88 kW) OR if the weight of the equipped vessel (with an engine, but without fuel and people) exceeds 200 kg.
What pressure should be in the cylinders?
The optimum working pressure is usually 0.2-0.25 atm (checked by pressing a finger - the surface should be elastic, but not hard as a stone).
How is PVC different from rubber?
PVC (polyvinyl chloride) is a modern synthetic material that is lighter, stronger and more resistant to rot and ultraviolet light than traditional rubber. inflatable boats are heavier, age faster and require more thorough drying before storage.