Bream is a welcome trophy for any angler who appreciates not only the excitement of the fight, but also the taste of the prey. Fishing from the bream from a boat is radically different from coastal fishing, providing anglers with unique opportunities to explore the bottom of the terrain. When you are on the water, you get direct access to deep brows, pits and river dumps, where this fish prefers to stay in the daytime.
Unlike shore fishing, where distance is often limited by range, the craft allows you to stand exactly above the perspective point. gearIn this article, we will discuss all aspects of effective bream fishing from the board.
Experienced anglers know that bream is a schooling fish and careful. Any excess movement or noise can scare the joint, so preparation for the departure should be careful. electric motor preferable to loud gasoline unit, and a stable boat will provide comfort when catching trophies.
Selection and preparation of craft
There are different types of boats for bream fishing, but each has its own nuances of operation. PVC inflatable models are the most popular because of their versatility and the ability to transport in the trunk of a car, and they provide sufficient stability and quietness, which is critical for catching shy fish.
Metal boats, or Kazankas, are more durable and durable, but require a trailer or a special storage space, the main advantage of which is the ability to install powerful attachments and comfortable accommodation of several anglers. However, the metal hull is noisier when in contact with waves or tackle, which requires the fisherman to be more careful.
The key element of the preparation is the correct anchorageFishing bream often requires stretching two anchors (nose and stern) to keep the boat from turning across the stream and making too much noise. Using cat anchors or rope cargo allows you to quickly change position when looking for active fish.
And safety is also a safety issue, with life jackets, a scoop and a reliable life jacket. anchor-line The bream often bites sharply, and a sharp jerk of a large individual can lead to a loss of balance in a narrow boat.
Search for perspective places and navigation
The success of bream fishing depends 90 percent on the right location, and it prefers to stay at the depth boundary, where the quiet waters are adjacent to the current, ideal points are the bream pits, the dumps in the depths and the areas with the colonies of the seashell-drivers.
Modern anglers don't rely on luck, but instead use sonars to study the bottom, and the instrument allows you to see not only the depth, but also the structure of the bottom, the presence of vegetation and even the accumulation of fish. The most productive are the depth drops from 4 to 8 meters with a solid clay or shell bottom.
When looking for a place, it is important to pay attention to visual signs. Gas bubbles rising from the bottom ("buckling game") often indicate a flock feeding, and bream likes to stand near flooded bushes or snags, but fishing in such places requires high skill to avoid hooks.
- π£ Look for sharp drops in depths (dumps), where the depth varies from 3 to 6 meters in a short distance.
- π£ Pay attention to the areas with a backflow or whirlpools below the islands.
- π£ Promising deep tables with a flat bottom, surrounded by pits, especially at night.
Use a GPS tracker or markers on the sonar to remember the coordinates of the catch points.
It's important to consider the direction of the wind and the current, and it's better to have the boat head-on against the current or the wind, so that the gear is carried away from the sides, rather than under them, and this also reduces the noise from the waves hitting the side, which can alert the fish.
Fishing gear from the side
The boat fishing arsenal is very different from the shore one, and you don't need long-distance casts, so the length of the rods can be much smaller, and the main tools are the rods, the float gear, and the donkeys.
The onboard fishing rod is a compact rod from 1 to 2 meters long, equipped with a nod or a sensitive tip, and this gear allows you to feel even the most cautious bites of a bream. fishing-line with a diameter of 0.20-0.25 mm, since in clean water at a depth, bream can be very careful.
The boat's float gear is effective in catching floes or over grass, using special boat floats with a long antenna, which are clearly visible from close range, and the load should be distributed so that the nozzle slowly sinks to the bottom, provoking the fish to attack.
Features of nod gear
The nod for the rod should be tougher than for winter fishing to compensate for the swaying of the boat. The optimal length of the working part is 15-20 cm.
Bottom tackles, such as squirrel Or short-throw feeder mounts, which are also effective, and they allow you to catch on strong currents where the float is useless, and the main requirement is the sensitivity of the tackle, because the bream often tries the nozzle before swallowing it.
Feeding tactics (Seeding)
Feeding from a boat has its own specifics, and because you're directly above the fishing point, bait can be delivered point-by-point and in large volumes without fear of the scattering characteristic of throwing from shore.
The ideal tool for feeding is dump-truck Or a cone bucket with an opening bottom, and by lowering it to the bottom strictly under the boat, you create a dense feed spot that quickly attracts bream, and the mixture must necessarily include large fractions: steamed peas, barley, cut worm or squirrel.
- π² Use flavors with caution: bream is sensitive to sharp smells, preferring natural aromas (garlic, anise, cinnamon).
- π² Add to the bait soil from the bottom of the reservoir to make the mixture more inert and less noticeable to fish.
- π² To keep the flock under the boat, you need to periodically throw small portions of food ("to feed"), but not to overfeed the fish.
It's important to consider the current. If it's strong, you add clay or special binders to the bait so that the mixture is washed out gradually, creating a plume. In standing water, the mixture should be lighter and more dusty.
β οΈ Warning: Never use a bait with a sharp smell of rotting or petroleum products. Bream has a great sense of smell and will just go away if it doesn't like something.
Fishing and catching
The technique of catching from a boat requires constant concentration. The rod is usually held in the hands or mounted on board, controlling every movement of the nod or line. The pecking of the bream often looks like a smooth lift of the nod or, conversely, its tension.
The cut should be sure, but not too sharp, so as not to break the lip of the fish. Bream has fleshy lips, and with a weak cut, the hook can pop out. After the cut, the fish should be immediately taken away from the boat, so that it does not confuse the gear on the anchor ropes or the board.
It's an art of catching a large bream, and you don't have to force things, especially if the fish is deep, let it cool down by periodically raising it to the surface and lowering it again. Use it. sucker with a long handle to safely take the trophy into the boat.
βοΈ Checklist before getting on the water
If you bite a large specimen, try not to make sudden movements in the boat. The bream is very shy, and a splash on the surface can frighten the entire flock. Carefully bring the fish to the board and quickly turn into the suckers.
Seasonal features and fishing time
The bream from the boat is effective throughout the open water season, but it has its peaks of activity. In spring, after spawning, the bream begins to feed hard, recuperating, while it is kept in warmed shallow waters next to deep pits.
In summer, especially in the heat, the bream shifts to deep areas with cool water and good oxygen regime. The best time to catch is early morning (from 4 to 9 hours) and evening watchfulness. Night fishing can also be very effective, since large bream often comes to feed in the dark.
In autumn, when the water cools, the bream gathers again in large flocks and goes to the wintering pits, during which time it is less active and takes longer to find fish, but the bream caught in autumn is often the largest and most fatty.
| Season. | Time of day | Depth of fishing | Best nozzle. |
|---|---|---|---|
| spring | Day | 2-4 meters | Worm, moth |
| Summer. | Morning/Night | 4-8 meters | Steamed peas, corn |
| autumn | Day/Evening | 6-10 meters | Sick, sandwiches. |
| Winter (from under the ice) | Anybody | The pits are deep. | Moth |
β οΈ Warning: During spawning season (May-June, dates vary by region), bream fishing is often prohibited or restricted by catch regulations.
Frequent mistakes of fishermen
Even experienced fishermen sometimes make mistakes that make them less than they can, and one of the most common is the wrong anchoring, where if the boat is sideways, it's constantly being blown away, the gear gets tangled, and the noise of hitting the water scares the fish away.
Another mistake is to use too rough gear, because the bream sees the line, so the desire to use "impenetrable" diameters often leads to the absence of bites, and many people forget about the disguise: bright clothes or sharp movements of the angler's silhouette against the sky can alert the fish.
Some anglers try to catch bream only from the bottom, ignoring the middle horizons. In hot weather or when atmospheric pressure changes, bream can rise into the floes, and ignoring this fact leaves the angler without catch.
The secret to success is silence, precise anchoring, and constant experimentation with nozzles. Breath is unpredictable, and what worked yesterday may not work today.
Analyze each trip, record where the fish was caught, what nozzle, what wind, and the statistics that you've accumulated will help you become a true master of bream fishing.
Frequently Asked Questions (FAQ)
What is the minimum depth suitable for fishing from a boat?
The optimum depth starts from 3-4 meters. At lower depths, breams are rarely caught from a boat, because they are afraid of the shadow and noise of the boat. However, in early spring or at night, fishing can be done up to 2 meters if the bottom has a suitable relief.
Should I use a sonar to search for a bream?
The sounder greatly speeds up the search for promising places, showing the relief of the bottom and the presence of fish. However, experienced anglers can find bream by external signs (bubbles, shore relief), using the method of βprobingβ the bottom with a load.
Why did the bream stop pecking in the middle of the fishing?
There are several reasons: change in atmospheric pressure, approached the predator, ran out of bait or fish just scared of the noise. Try to change the nozzle, add fresh bait or move to another place.
Which boat is better to choose for a beginner?
For a beginner, a 3.2-3.6 meter long hard bottom (HBB) PVC inflatable boat is ideal, stable, easy to operate and transportable, and metal boats require more management skills and storage conditions.