Fishing by lift, or by snorkeling, is traditionally associated with stationary fishing from the shore or bridge, but the use of the boat opens up completely new horizons for the angler. Mobility It's a key advantage of allowing you to quickly change the fishing points depending on the behavior of the schools of fish. Unlike onshore fishing, where the range is limited by the length of the arm or fishing rod, the boat gives you access to deep pits, distant brows and snags, which are not accessible from land.
However, fishing on the lift from the boat requires the owner of the vessel not only knowledge of the habits of the fish, but also excellent coordination of movements. Maneuverability The watercraft here plays a crucial role: you need to bring the board silently and accurately to the chosen place, so as not to scare the inhabitants of the reservoir. Any unnecessary movement or impact of the oar on the side can negate all efforts, forcing the flock to go to a safe depth long before the tackle is submerged.
The most important aspect of successful fishing is the correct selection of equipment and understanding of the hydrodynamics of the process. It is critically important to consider that the lift creates significant water resistance when lifting, which can destabilize a lightweight inflatable boat if not balanced. Experienced anglers know that success depends on a lot of little things, from water transparency to flow speed and even time of day, and understanding these nuances makes simple frying or bait fishing fun and productive.
Selection and preparation of a boat for fishing with blackhead
The first thing you should start preparing for fishing on the lift is to assess the specifications of your boat. hard-bottom (DND or aluminum) because they provide a stable platform for the installation of gear. Inflatable boats with inflatable floor are also applicable, but require greater care when manipulating the heavy load of the lift, so as not to damage the cylinders with other elements of the structure.
Boat sizes directly affect fishing techniques: On narrow single-seater vessels, working with a large lift (for example, 2x2 meters) is extremely difficult and even dangerous because of the risk of a coup. Optimal width For such fishing, distances from 120 cm or more are considered, which allows the angler to conveniently sit down and make vertical movements without losing balance.
⚠️ Warning: Never work with a lift while standing on the same side of an inflatable boat. A sharp roll when lifting a tackle filled with water and fish can cause the vessel to tip over. Always maintain the center of gravity along the axis of symmetry.
It's also worth taking care of the availability of special mounts or stops. Many anglers use homemade ones. rag-tag Or you put temporary racks on board to lock the handle of the lift in the position of use, which frees up your hands to control the oars or the motor as you move between the fishing points.
Design features of lifts for boat fishing
Choosing the right gear is half the success, and the most effective lifts for boat fishing are the square or round lifts with the cross. constructionThe lift will be too light to sail in the current and wind, and an excessively heavy lift will make it difficult to climb quickly. The best solution is a model with a combination of aluminum tubes and steel elements in high voltage areas.
The size of the net depends on the purpose of fishing. For winter fishing or for home fish breeding, a fine mesh (from 3 to 5 mm) is used. If the goal is to catch food fish (carp, perch, roach), then a 10-15 mm cell is preferable, which is less resistant to water when climbing. Grid material Also important: the capron thread is stronger, but more noticeable in water, while the linen net is more imperceptible, but wears out faster.
Special attention should be paid to the cargo system. In boat fishing, often the use of a load at the ends of the cross is not classic, but an additional cargo belt around the perimeter, which ensures uniform and rapid immersion of the gear, which is critical for catching shy fish. cargo-pocketWhere you can add lead depending on the strength of the current.
☑️ Checking the lift before getting on the water
Search for promising places and installation tactics
Boat Fishing gives a unique advantage - the ability to explore the bottom relief. depth-testUsing a sonar makes it much easier to detect the sharp changes in depth, the abrupt changes in the aquifers and bottom anomalies where fish are most often found, but even without a sonar, you can identify promising places by external signs: changing the color of the water, the presence of aquatic vegetation or the play of birds.
When choosing a place to set up, it is important to consider the direction of wind and current. You should approach the fishing point against the current or wind so that the boat does not carry on the installed gear. Anchor system It should be reliable: the use of two anchors (in the nose and on the stern) allows you to fix the boat above the point and prevents its turn, which is especially important in windy weather.
| Type of bottom | Recommended tactics | Risks. |
|---|---|---|
| Ilistoic | Frequent movements so as not to muddy the water | Stucking cargo in sludge |
| Rocky | Careful descent, tension control | The grate's thrust against sharp stones |
| Sandy | Perfect for any catch. | Minimum |
| Overgrown | Use of raised structures above the bottom | A hook on snags and grass |
The water transparency factor is not to be ignored: in murky water, fish are less careful and come closer to the shore or boat, which allows for smaller lifts; in clear water, on the contrary, greater care is required, the use of cloaking nets and the installation of gear at a greater distance from the side of the boat.
The secret of catching on a brow
When fishing at a dump (brow), set the lift so that its edge is on the upper edge of the dump. Fish moving along the brow often falls into the range of the tackle, especially if you use bait that slides down the slope.
Catching and catching techniques
The boating process is very different from the shore fishing, where the angler is an active participant, not an observer, and after the lift is submerged, you have to wait a certain time, which can range from a few minutes to half an hour. Exposition time It depends on the activity of the fish and the presence of bait, and experienced craftsmen often use a timer or simply monitor the behavior of the fish around the boat.
The lifting of the gear is the most important thing. The movements must be smooth, but confident. A sharp jerk can scare the fish, and it will have time to jump out of the net when the edges of the lift appear on the surface. When lifting heavy tackle full of water, it is important to work not only with your hands, but also with the body, using the help of the body. leg to keep the pressure on the spine down.
⚠️ Attention: When lifting a full lift, water drains through the cells, creating powerful streams. Keep your face away from the net to avoid splashes and the possible impact of jumping fish in the eyes.
Once you're above the water, you need to quickly but carefully reload the catch into a cage or container. If the target is a bait, it's best to sort it out on the shore so that you don't injure the fish by manipulating the boat. light-attractivenessLowering the waterproof lamp in the center of the lift, it works especially effectively in the evening and at night.
The key to success is rhythm. Try to keep the same interval between diving and climbing, so that the fish get used to the cyclical process and less scared.
Chrystal and attracting fish to the lift
The use of bait when fishing from a boat lift is not only desirable, but often necessary. Unlike in stationary fishing, where bait creates a stain, you need to quickly collect the fish under the boat. dump-truckwhich descend into the center of the lift or next to it before diving.
The composition of the bait depends on the type of fish. For roach and bream, mixtures based on breadcrumbs, cake and boiled millet with the addition of flavors (anise, vanilla, garlic) are effective. For a predator such as perch, you can use small bait or fish cutting, pre-frozen in ice balls. The dusty fraction bait creates a muddy pillar that visually attracts fish from a long distance.
It's important not to overfeed the fish. It's important to keep the flock within range of the lift, not to saturate it. So the portions should be small but frequent. Some anglers use specialty feeds. sprayer, which create a cloud of muthi directly at the time of immersion of the tackle, which provokes the fish to actively feed.
Safety and legal aspects of fishing
Fishing on a boat lift carries certain risks, both with regard to water safety and with regard to the law, and first of all, you need to make sure that the use of the lift is allowed in the water body. Fishing regulations Other regions can differ significantly: somewhere blackberry fishing is allowed all year round with size restrictions, and somewhere completely prohibited or allowed only for the extraction of bait.
From a water safety perspective, working with a lift requires constant monitoring of body position, and tilting overboard with a heavy load in your hands is a direct road to falling into the water, especially in the cold season. lifejacket It's a must, even if you're a great swimmer, cold water and heavy clothing can be a cruel joke.
⚠️ Attention: It is strictly forbidden to use hoists with a mesh size less than acceptable for fishing in the region, which can be regarded as poaching with all the legal consequences that follow.
Weather is also important, because wind and wave can make the lift impossible and dangerous, because a boat with a high center of gravity (because of the angler standing upright and the gear raised) becomes less stable, and in such cases it is better to abandon the idea and switch to other types of fishing or return to shore.
For ease of transportation and storage of the collapsible lift, use a special case made of dense fabric with straps. This will protect the mesh from ultraviolet light and mechanical damage, and also make it easy to carry the gear from the car to the water.
Frequently Asked Questions (FAQ)
Can I take a boat lift in winter?
Yes, fishing is possible, but requires a sufficient sized mine to be cut through, but it is a time-consuming process, and more often in winter, fixed ice holes or shore fishing are used if access to water permits.
What size lift is optimal for a single boat?
For a single boat, lifts of 1x1 meter or 1.5x1.5 meters are most convenient. Larger dimensions (2x2 and above) require a wide platform and considerable physical effort to lift, which can be unsafe on a narrow vessel.
Do I need a special permit to use the lift?
In most regions of the Russian Federation, hoists are permitted fishing gear, but with restrictions on the size of the mesh and the overall size of the gear. However, in some protected areas or during spawning, fishing may be completely prohibited. Always check the current fishing rules for your region.
How to prevent grid entanglement?
To keep the net from getting confused, it is important to dry and store it properly. After fishing, the lift must be thoroughly washed from mucus and silt, dried in straightened form and folded without breaking down. Using a quality fishing thread also reduces the risk of a beard.
Is the lift fishing effective on the current?
In the strong current, fishing by lift is difficult due to the demolition of gear and boats, but in the moderate course, the use of additional cargo and the correct installation of anchors allow you to successfully catch fish, which often sit in the stream while waiting for food.