Fishing from a swimming facility radically changes the approach to catching large fish, turning the standard procedure into a complex tactical maneuver. On the shore, anglers have complete freedom of movement, can move back or move to the side to tire a resisting predator or carp. From the side of the boat, space is limited by sides, and the risk of losing a trophy due to a sharp jerk or a break in the fishing line at the very board increases many times. It is at this critical moment that the foreground comes to the fore. boat-drinkIt is a guarantee of the safety of the catch.
Many aspiring spinning and carpal players underestimate the importance of this element of tooling, relying on crook, bumpor or just hand strength. However, the statistics of trophy pike, pike or catfish coming off the side of an inflatable boat are alarmingly high. A properly selected tool not only helps to extract fish, but also minimizes stress for aquatic inhabitants if they plan their vacation, and also protects the nerves and equipment of the angler himself. Handle length The design of the head plays a crucial role in this context.
In limited space, it is critical that the tool is not only durable, but also easy to store. Oversized shore models can interfere with maneuvering or high winds, creating sailing. So choosing specialized equipment requires considering many factors, from the type of boat (PVC, aluminum, plastic) to the target fish you hunt. In this article, we will discuss in detail the technical nuances and tactics.
Criteria for choosing the ideal sucker for boat fishing
The first thing to look at when buying is length For fishing from a boat, especially with a low side, you do not need a giant 4-5 meter barbell, which is used when fishing from cliffs or bridges. The optimal range is considered to be a length of 1.5 to 2.5 meters, which allows you to comfortably reach the fish without falling overboard and without disturbing the balance of the vessel.
The second critical parameter is the net material. Traditional fishing lines, although they don't rot, can injure fish scales and, more importantly, are often confused in Woblera tees. soft-silicon Or rubberized mesh, or so-called "rubber mesh," are devoid of these drawbacks, they don't absorb odors, they clean easily, and most importantly, they fall off themselves or are removed in a single motion without hooks.
Also worth considering is the weight of the structure. Keeping heavy aluminum or steel sucker with one hand while active sticking quickly tires. Composite materials and carbon allow you to reduce weight to a minimum, keeping high strength on the break, but you should remember that carbon conducts electricity, which can be dangerous when fishing in a thunderstorm or near power lines.
⚠️ Warning: Never use a suctioning suction with a metal rabies net to catch from inflatable boats. The sharp edges of the cells can easily puncture a PVC cylinder when carelessly moving, leading to a water emergency.
When choosing between a telescopic handle and a plug, many prefer the former because of its compactness. Telescopic models, when folded, take up the minimum space in the handle. However, plug extensions, consisting of 2-3 sections, often have greater rigidity and do not have the backlashes that eventually appear in telescopes. For trophy fishing, where every gram of pressure on the handle is important, the rigidity of the structure comes to the fore.
Design features: handle, head and joints
The suction handle is not just a stick, it's a lever of control of the trophy. In boat conditions, it's not just the length that matters, but the buoyancy of the material. If you drop the tool overboard during a sharp bite, it should stay on the surface of the water. Wood and some composite handles have positive buoyancy, while all-metal will irretrievably sink with the fish. Floating A property that is often ignored but regrets its absence at the most inopportune moment.
The head of the suction (curtain) is also subjected to serious stress. In boat fishing, it is often necessary not just to bring the fish, but to scoop it out, which creates a load on twisting. Quality models are equipped with reinforced hinges or cast aluminum headers. Cheap plastic joints can crack from impact on the side or when a large pike jerks. Particular attention should be paid to the angle of the head relative to the handle: for a boat, models with variable geometry or a fixed angle, convenient for working from a low position.
The mounting of the net to the hoop is another node that needs to be checked. In good models, the net is either glued into a special groove or securely sewn with a double seam. If the net is attached to plastic clamps or weak threads, it can come off at the moment of the final jerk. interlacingThis allows you to quickly replace the damaged element directly on the water.
- 🎣 Handle material: Aluminum (light but sinking), Carbon (strong, light, conductive), Glass (flexible, floating), Wood (classic, floating, but heavier).
- 🕸️ Grid type: Leska (durable but entangled), Nylon (soft but absorbs smells), Rubber/Silicon (ideal for Wobblers, easy to wash).
- 🔗 Addition mechanism: Telescope (compact), Stecker (reliability and rigidity), Folding head (for ultra-compact storage).
And the diameter of the head is also important. Pike and perch are best shaped to get the fish off the head. Carp and Cupid need a rounder, deeper bowl to make the fish feel confident and less resistant. There are few universal models, so the choice is often dictated by the main target.
Tactics of catching and working with sucker from the board
The technique of working with a suction boat is very different from the onshore one. The main mistake of beginners is to try to catch a fish in motion by chasing it through the water. It's almost guaranteed to get a fishing line in the net or, worse, to hook the side of the boat or clothes. The suction is always in the water. The fish is put into a net, not the other way around.
The angler's position also matters. Getting up in a boat while catching a large fish is strictly forbidden, it threatens to tip over. All manipulations are done sitting or kneeling, resting your foot against the side for stability. The suction is taken in the opposite arm to the one in which the rod (if you do not use the holder), or transferred to a partner. In solo fishing, the rod is often placed between the legs or in a special holder on the belt, freeing both hands for final surgery.
The process is, you tire the fish by bringing it to the boat. You put the suction fish head in the water beforehand, creating a pocket. In a sharp but controlled movement, you pull the fish up to the boat and simultaneously lift the suction, getting the fish off the head. It's important not to poke the net into the fish trying to catch it, but to let it go into the ready trap itself. After that, the suction handle is pressed to the board, and the fish remains in the water at the side until you are ready to pick it up.
⚠️ Warning: When lifting a large fish (more than 3-5 kg), never try to drag it solely on the weight of a sucker. The handle may not support the weight, or the fish will pop out. Always hold the fish with the second hand over the side or use the elevator system if it is provided by the design.
If you're fishing with a partner, the roles should be clearly assigned. One catches, the other gets hooked. Teams should be concise and clear: "Into the water," "Rise," "Eat." Chaos and simultaneous action often lead to anglers banging their foreheads or getting tangled in tackles. An experienced partner knows to keep the suction in the water and wait for the command, rather than waving it over the water.
Specifics for different types of boats: PVC vs. Metal
PVC inflatable boat owners face a unique set of equipment requirements. As mentioned, any sharp angle or metal part on the suction is a potential hole in the cylinder. silicone-grid Even the accidental impact of a plastic handle on the PVC side is less terrifying than the metal forearm.
In metal boats, the requirements shift to durability, where there is less fear of puncture, but more emphasis on corrosion protection, salt water or just an aggressive environment quickly disable cheap aluminum alloys and steel, and for metallers, it is more important to have reliable mounts for sucking on board, since in a hard boat there is more space, but also more hard surfaces that you can break the gear against.
Boat sizes also dictate the length of the handle. In a small single-seat "skating rod" or inflatable boat up to 3 meters long, the long handle will simply interfere, constantly clinging to a transom or paddles. Short models 1-1.5 meters long or even special ones are appropriate here. netting Large boats and boats from 4 meters in length can afford full-size telescopes, which give you an advantage in range.
| Characterization | PVC Boats | Metal Boats | Plastic (FRP) boats |
|---|---|---|---|
| Risk of damage to the side | Critically high (puncture) | Low (scratches) | Medium (slips, scratches) |
| Recommended material of the grid | Silicone/Resin | Leska/Nylon | Silicon/Nylon |
| Optimal length of the handle | 1.2 - 2.0 meters | 2.0 - 3.0 meters | 1.5 - 2.5 metres |
| Storage requirements | Compact, sun protection | Corrosion protection | UV and impact protection |
It's worth noting that kayaking owners have their own peculiarities: they produce miniature suctions with a very short handle or folding structure that are attached directly to the deck. The use of a large kayak podsuck is often impossible for physical use due to the low landing and narrow hull.
Overview of popular models and brands in the market
The fishing goods market offers a variety of options, from low-cost Chinese counterparts to premium professional equipment. BrowningThe Black Magic series is distinguished by its excellent value for money, often featuring a telescopic aluminium handle and a soft mesh, making them a versatile choice for a boater.
Brand Flagman It offers affordable solutions that are popular with novice anglers, and their suckers are often equipped with a case that is convenient for transport in a boat, but be prepared for the fact that the materials can be inferior to top brands in durability when used intensively. For amateur fishing, they withstand a couple of seasons confidently.
For those who are looking for the highest quality and are willing to pay for it, there are models from the Frabill and NetcraftIt's a professional tool with a lifetime warranty on many knots, and their Preserve nets are considered the safety standard for fish, and carbon or high-quality fiberglass handles weigh almost nothing. Investment c such a sucker is justified if you often catch trophies or participate in competitions.
- 🏆 Browning Black Magic: Light, reliable, good equipment.
- 💰 Flagman / Salmo: Budget segment, availability, basic functionality.
- 💎 Frabill / Netcraft: Premium class, maximum safety for fish, durability.
When choosing a particular model, pay attention to the availability of spare nets on sale. It is often easier and cheaper to buy a new sucker if you can not find a consumable for the old one. The popularity of the brand in your region ensures that in a year you can find a replacement net instead of throwing out a good handle due to torn fabric.
Water Storage, Maintenance and Safety
Proper storage of the sucker prolongs its life. After fishing, it must be dried. A wet net in a closed case is the perfect environment for mold and an unpleasant odor to develop, which then scares off the fish. Metal telescopes must be pushed and wiped dry to avoid jamming sections due to corrosion.
In a boat, the suctioner has to have its own fixed space, and it's not acceptable to throw it to the bottom where it's going to interfere with your legs or get tangled in the anchor flounder, and there are special holders that are attached to the boat or built into the seating structure, and they allow you to keep the tool on hand in a vertical or horizontal position without taking up useful space on the floor.
Safety comes first. Remember, a long-handled suction in windy weather turns into a sail. On a small boat, it can lead to loss of stability. In a bayonet, it is better to use short models or even refuse to catch in dangerous conditions. Also, make sure that the wobbler hooks do not cling to clothes or skin when extracting fish from the suction - this is a common cause of injury.
⚠️ Attention: If you are fishing in a thunderstorm, immediately remove the carbon suction away from you and hide it in a hazel. A lightning strike in a long carbon stick in your hands can be fatal. In a thunderstorm, fishing from the boat should be stopped.
Check the condition of fasteners regularly. Motor vibratory screws and bolts are prone to spin out. Once a season, it is recommended to stretch all joints and lubricate the moving parts with graphite lubrication. This is especially true for telescopic mechanisms that are prone to sand and silt contamination.
FAQ: Frequently asked questions
Can I use a beach suction for fishing from a boat?
Technically, it is possible if it is not too long (up to 2.5-3 meters). However, shore suctions often have a metal mesh or rigid elements that are dangerous to PVC boats.
How long is a suction needed for a pike from a boat?
For pike optimal length of the working part (head) about 40-50 cm to safely start the fish from the head. the length of the handle depends on the side of the boat: for low side PVC enough 1.5-2 meters, for high metal side it is better to take 2.5-3 meters.
What is dangerous fishing net for Wobbles?
The linen net is small and rigid, and the wobbleries stick tightly into the line, and it's almost impossible to untangle them without damaging the net and breaking the wobler. Silicone net is smooth, and the hooks are easily taken out or fall out on their own.
Do you need a sucker case?
Yes, the cover is necessary to protect the net from ultraviolet light (which destroys synthetics) and from hooks during transportation, and the cover prevents wet mesh stain other things in the boat.
How to fix a torn podsuck net?
Small gusts on nylon nets can be sewn with a knight thread. On silicone nets, repair is difficult, often requires replacing the entire grid. If you gust at the edge, you can try to re-rear the edge by slightly reducing the diameter of the head.