Search for predators from a swimming tool radically changes the approach to fishing, opening the angler inaccessible from the shore horizons. Boat. You can drop the bait to the coveted eyebrow or shoot through a deep-sea dump where a large pike hides, and statistics show that you can catch a trophy from the water that weighs two to three times more than from shore fishing, as access to deep pits becomes possible.
However, the boat management requires skills and compliance with safety rules, especially when working with powerful spinning. Pike. The predator is careful, and motor noise or a careless paddle strike can scare the fish away for a long time, which is why the angler must have perfect gear and know the habits of the object of fishing, to turn the outlet into effective fishing.
In this article, we will look at everything from the choice of sonar to the technique of wiring the jig on the flow, you will learn how to anchor properly so as not to scare the fish, and which baits work best when fishing from a boat. The optimal depth for finding a trophy pike in autumn often exceeds 4-5 meters, where the coastal spinning simply does not reach.
Selection and equipment of floating craft for spinning fishing
For comfortable spinning fishing, the size and type of boat are critical. Too narrow or unstable boat will make bait wiring impossible, especially when fishing in a standstill or in high winds. The ideal option is considered an inflatable PVC boat from 330 cm in length or an aluminum "kazak" with a flat bottom, providing the necessary stability.
The most important element of equipment is the correct anchor The anchoring system requires an anchor winch or at least a secure anchor to quickly buckle or anchor when fishing in a snag. Many anglers prefer to use two anchors, one on the nose and one on the stern, allowing them to stand "across the wind" or current.
- 🚤 Sustainability: The boat must withstand sharp jerks when catching a large predator without the risk of a coup.
- ⚓ Management: The presence of a transom board for fastening the motor and sonar is necessary for comfortable fishing.
- 🎣 Space: The boat should have enough space to accommodate the lift and the coocan so that they do not get confused under their feet.
And don't forget to protect the sides, because when you're fishing for pike, you often have to work with sharp hooks of tees, which can damage the material of the boat when you're not moving sloppy, and using protective pads or just being careful will help you avoid punctures away from shore.
Electronic assistants: sonar and navigation
Modern pike fishing from a boat is unthinkable without a sonar, and this instrument allows you not only to see the depth, but also to detect the structure of the bottom, the driftwood and the accumulation of small fish that the predator is hunting. echoer helps to find those "navels" and dumps where there is a large pike, saving hours of senseless flare.
When choosing a model, you should pay attention to the frequency of the emitter and the presence of DownVision or SideVision, which gives a detailed picture on the sides of the boat, allowing you to see the fish and the relief without having to swim directly above the point, which is especially important when fishing in shallow water, where the pike can be afraid of the shadow of the boat.
| Parameter | Budgetary option | Professional level |
|---|---|---|
| Scanning frequency | 200 kHz (standard) | CHIRP (wide range) |
| Screen resolution | 480x272 pixels | 800x480 and higher |
| Emitter power | 250 watts | 500 W and higher |
| Additional functions | Just depth. | GPS, maps, 3D terrain |
Navigation also plays a major role, by recording the coordinates of the catch point in the GPS-navigatorAnd you can go back to it next time with a meter accuracy, and this is especially true when fishing in large reservoirs, where it's almost impossible to visually find a specific brow dump.
Use the Track function in the navigator to remember the path to the most promising points and next time to complete it perfectly accurately.
Set of spinning equipment for the boat
Boat gear has its own specifications that distinguish it from the shore kit. First of all, it's the length of the rod. For boat fishing, short spinning is optimal, from 1.8 to 2.1 meters long. There's just nowhere to turn in the boat for long sticks, especially if you're fishing together.
Spinning test The jig fishing at depths often requires rods with a test of up to 40-50 grams to break through the wind and current. The coil must be reliable, with a good linelay and a powerful friction that can withstand the first jerk of a large pike.
⚠️ Warning: Never place the spinning upright, resting it on the side or bottom of the boat in high wave or wind. A sharp roll of the boat can cause an expensive rod to break. Always use the holders or place the gear horizontally.
The wicker cord is the only option for boat fishing. It is not stretchable, which allows you to feel even the most careful bites at great depth and make a powerful cut. The diameter of the cord is chosen depending on the transparency of the water and the size of the proposed trophy, but most often it is the range of 0.12-0.16 mm according to the Japanese classification.
☑️ Assembling tackle
Tactics of search and catching promising points
The main advantage of the boat is the ability to stand above a point or approach it from the right side. Search tactics are based on reading the relief. Pike likes to stand on the edge of the depths, at flooded driftwoods, on brows and in the thickets of grass. When you get to a point on the boat, you have to stand so that the throw is made across the eyebrow or along it.
When you go jig, you often use the fan method, and you anchor and you do a series of rounds, and you gradually catch the sector, and if you don't bite, the boat moves a few meters, and the cycle repeats, and you can comb through the whole perspective.
It's important to consider the direction of the wind and the current. Try to get up so that the wind or the current carries the boat away from the fishing point rather than to it, this will allow you to make more accurate throws and avoid hooks on the boat when you're catching. If you're fishing at depth, the noise of the motor can scare the fish away, so approach the point silently using an electric motor or paddle.
- 🌊 Sval: Fill the upper and lower edge of the dump, changing the weight of the load.
- 🌿 Grass: Make wiring along the edge of the reed or water lilies.
- 🪵 Boatman: Use unconnected and snags around the snags, without throwing into the thickest thickets.
The secret to the dead hook
If the jig is stuck in a snag, don't pull as hard as you can. Relax the line tension, let the bait float a little bit or shift the current, then make a sharp jerk to the side. Often this helps to rescue the bait without loss.
Choosing baits for different fishing conditions
The backup from the boat should be diverse. siliconeVibrotails and twisters, 10 to 15 cm in size, work perfectly on a large pike, and it's important to match the color of the bait to the conditions: in clear water, natural colors work, and in murky water, bright, acidic colors.
Wobbles are also used, especially in shallow and grass fishing, large minnows and sheds allow for long-range casting and large areas of fishing, and boat fishing is characterized by the use of larger and heavier baits than shore fishing, since the range of the cast is compensated by the accuracy of the feed from the boat.
Special attention should be paid to foamfish and mandulas, which are fantastic baits for catching passive pike in cold water, and their vertical play when falling often provokes predators to attack when silicone is silent.
⚠️ Warning: When using heavy jig head (over 30 g), be careful when throwing. Once on board a boat or on gear, such a load can damage the craft or confuse the cords.
The technique of wiring and pulling the trophy
The wiring technique from a boat has its nuances. The jig fishing often uses a step, but from a boat you can effectively use even wiring, or wiring with tosses, the main thing is control of the bait. You have to feel every touch of the bottom.
Getting the pike off the boat requires coolness. After the cut, don't force the events, let the fish get tired. When pulling the predator to the board, be sure to hold the spinning with the second hand, controlling the tension of the fishing line. A sharp jerk of the pike at the very board can lead to the descent or breakage of the gear.
To lift fish into the boat, you must use it. suckerTrying to grab a big pike with your hands or pulling up a line is a bad idea, it can end in an injury to your hands or loss of a trophy, and you should always have a hand-holder, ready to go.
90 percent of the success of the catch depends on the right stretching of the line and the use of a lift. Don't let the pike go into the grass or driftwood.
Security and legal aspects
Boat Fishing requires strict safety regulations. Having life jackets for everyone on board is not just a formality, it is a necessity. The weather on the water changes quickly, and even an experienced angler may not cope with a sudden storm without proper equipment.
Do not forget about the rules of the GIMS. You must have the documents for the boat and the engine, as well as the rights to operate a small vessel if the engine power exceeds 5 hp (or 8 hp depending on the year of production and type of engine), Violation of these rules can lead to a serious fine and evacuation of the vessel.
Also consider spawning seasons, which are strictly prohibited from fishing on many bodies of water, and always check the current information about the bans in your area before leaving, so that fishing is not overshadowed by communication with inspectors.
Can I catch a pike from a boat at night?
Night fishing of pike from a boat is allowed outside the spawning period, but requires special care and the presence of navigation lights on the vessel. However, the effectiveness of such fishing is often lower than during the day, since pike is a visual predator, although in the spring and autumn night fishing can be successful.
Which motor is better for spinning: gasoline or electric?
For active spinning fishing, the ideal combination is the presence of a main gasoline engine for fast transitions and an electric motor for silent maneuvering on the point. The electric motor allows you to stay at anchor and accurately position the boat without noise and exhaust gases.
What to do if the boat was blown away by the current?
If the boat is being carried to the driftwood, the first thing to do is to set the anchor tile (if the anchor is stuck, it is better to lose it than the boat). If there is no anchor, use the oar or motor to turn the boat with your nose against the current and gain a course for maneuver. Don't try to row across the strong current - it is useless.
Do you need a kukan when fishing from a boat?
The kukan is a convenient way to store fish caught in water, which is especially important in hot weather. However, if you practice the catch-let-let-go principle, you don't need a kukan. When using the kukan, make sure that the fish does not get tangled up with the fishing line or cord on which it is held.